JOB DESCRIPTION

O responsible for electrical

1. General provisions

1.1. Responsible for electrical facilities organizes production, technical, and economic activity energy services. He is the person responsible for the electrical facilities of the organization and belongs to the category of managers.

1.2. Responsible for the electrical facilities of the organization is appointed and dismissed by the director.

1.3. A person with a higher or secondary technical education and work experience in accordance with the specialty profile for at least 3 years is appointed to the position of the person responsible for the electrical facilities of the organization.

1.4. The person responsible for the electrical facilities of the organization reports directly to the director of the organization.

1.5. Must know:

- resolutions, orders, orders, methodological and regulatory materials for the operation of power equipment and communications;

— organization of the energy sector;

— prospects for the technical development of the enterprise;

— specifications, design features, operating modes and rules for the technical operation of power equipment;

— a unified system of preventive maintenance and rational operation of equipment;

— organization and technology of repair work;

- methods of installation, adjustment, adjustment and repair of power equipment;

- the procedure for drawing up applications for energy resources, equipment, materials, spare parts, tools;

- Rules for the delivery of equipment for repair and acceptance after repair;

- requirements for the organization of labor in the operation, repair and modernization of power equipment;

— fundamentals of economics, organization of production, labor and management;

— basics of labor legislation;

— rules and norms of labor protection;

- current regulations on wages;

— regulatory — technical papers(NTD) (“Rules for the technical operation of electrical installations of consumers” (PTEEP), “Rules for the installation of electrical installations” (PUE), “Intersectoral rules for labor protection during the operation of electrical installations” (POTRM), “Rules for the use and testing of protective equipment used in electrical installations, technical requirements to them "(IPiISZ) in the scope of the position held, qualification characteristics and on OT instructions for personnel, instructions for the prevention and elimination of accidents, instructions for fire safety, economics and organization of production).

1. Job Responsibilities

Responsible for electrical facilities is obliged to:

2.1. Organize the production and economic activities of the organization.

2.2. Develop and install work plans for the energy service (electrical facilities).

2.3. Develop measures to save energy, materials, working time, bring specific goals and tasks to each worker.

2.4. Ensure reliable, economic and safe operation of electrical installations, training, instruction and periodic testing of personnel knowledge.

2.5. Control electricity metering and timely reading of electricity meters for the organization.

2.6. To participate in the development of systems for remuneration of workers, to prevent overspending of the wage fund.

2.7. Conducts overhaul electrical equipment of the enterprise, except for the mining service.

2.8. Systematically works to create safe conditions labor, compliance with safety rules and regulations, industrial sanitation and fire safety rules, for which it monitors the safe condition of production and auxiliary premises, equipment, safety devices, organizes investigations, records accidents and develops measures to prevent them, periodically checks employees' knowledge of the rules labor protection, safety and sanitation, timely provides workers with overalls, footwear and protective devices according to the norms.

2.9. Maintain required reports and submit them in a timely manner.

2.10. Ensure timely, high-quality repair of equipment and communications of electrical installations.

2.11. Maintain fire extinguishing equipment.

2.12. Introduce mechanization and automation of labor-intensive processes.

2.13. Ensure an uninterrupted supply of electricity to consumers.

2.14. Maintain equipment and communications of electrical receivers in working condition and their timely repair.

2.15. Follow the instructions of the energy supervision in a timely manner.

2.16. Timely identify the need for spare parts of electrical equipment and materials.

2.17. Responsible for environmental protection for the organization.

2.18. Organize and conduct technical and economic studies.

2.19. Do not allow and remove from work persons who are in a state of intoxication (narcotic) and violate the rules of labor protection and industrial sanitation, electrical and fire safety.

2.20. Keeps trade secrets.

2.21. Responsible for the timely verification of measuring instruments, their repair and operation.

2.22. Have approved electrical circuits, protocols for: electrical measurements and tests, checks of protection of electrical installations.

2.23. Draw up work schedules for the PPR and be responsible for their implementation.

2.24. Ensure the safety of employees in the operation of buildings, structures, equipment, in the implementation of technological processes.

2.25. Ensure appropriate labor protection requirements and working conditions at each workplace of directly subordinate employees.

2.26. Monitor the work and rest regime of subordinates in accordance with the legislation of the Russian Federation.

2.27. Do not allow employees to perform their labor duties without passing mandatory (periodic) medical examinations as well as medical contraindications.

2.28. Inform employees about the conditions and labor protection at the workplace, about the existing risk of damage to health and the compensation and funds due to them personal protection(PPE).

2.29. Take measures to prevent emergencies, preservation of the life and health of employees in the event of such situations, including the provision of first aid to victims of accidents.

2.30. Participate in the development of instructions on labor protection and ensure the availability of a set of them, in accordance with the approved List, instructions on labor protection for subordinate employees.

2.31. Conduct primary, repeated, unscheduled and other types of safety briefings for employees and monitor their mastery of safe working practices and methods, timely passing exams for knowledge of the relevant safety rules and standards.

2.32. Take immediate measures to stop work in case of non-compliance of workplaces with safety requirements, malfunction of equipment, tools, in the absence or malfunction of fences and other means of collective protection; insufficient lighting; the presence of harmful, explosive gases and mixtures in the air of the working area; malfunctions of ventilation systems; the absence or malfunction of control and measuring devices and equipment that ensure safe working conditions and in case of other violations that threaten the health of workers.

2.33. Ensure the maintenance of equipment, tools, fixtures, containers and workplaces in accordance with safety requirements.

2.34. Systematically monitor the availability and good condition of fences and protective devices at workplaces and areas.

2.35. Ensure that employees comply with labor, production and technological discipline and carry out constant educational work with them on labor protection.

2.36. Participate in the development of measures to improve working conditions and safety.

2.37. Eliminate violations of the POT of the requirements of energy supervision, safety and labor protection and the comments of authorized persons on labor protection.

2.38. Provide personal guidance separate works under high risk conditions.

2.39. Immediately inform the director and administration of all cases occupational injury and poisoning.

2.40. Monitor the good condition of the starting electrical equipment, the availability and serviceability of equipment grounding.

1. Rights

Responsible for electrical facilities has the right:

3.1. Submit materials to the director to encourage distinguished employees and impose disciplinary action or deprivation of the award in whole or in part.

3.2. Switch off electricity consumers in case of violations leading to accidents that threaten people's safety, take the necessary measures to restore, followed by notification of the organization's management.

3.3. Issue orders for the OEH (energy service), binding on all employees of the electrical staff.

3.4. Sign and endorse documents within their competence.

4. Responsibility

The electrical manager is responsible for:

4.1. Proper operation of electrical installations in accordance with the "Rules for the technical operation of electrical installations of consumers" (PTEEP), "Rules for the installation of electrical installations" (PUE), "Intersectoral rules for labor protection during the operation of electrical installations" (POTRM), "Rules for the use and testing of protective equipment used in electrical installations, technical requirements for them” (IPiISZ), standards, law on environmental protection and fire safety, quality of electricity supply to consumers, state of electricity metering.

4.2. Organization and timely implementation of planned - preventive repairs and preventive testing of electrical equipment of network equipment.

4.3. Safety, condition of the operated equipment and premises of electrical installations.

4.4. Failure to comply with orders and directives of the Directorate.

4.5. Failure to comply with the rules fire safety, labor protection, safety and industrial sanitation.

4.6. Poor repair and maintenance of electricity consumers in accordance with the PUE, PTEEP.

4.7. Improper performance or non-performance of official duties provided for this manual- in accordance with applicable labor laws.

4.8. Offenses committed in the course of carrying out their activities - in accordance with the current administrative, criminal and civil legislation.

4.9. Causing material damage - in accordance with applicable law.

AGREED:

Human Resources Department ____________ "__" _________ 201_

With job description

familiarized (a) ___________ "__" ________ 201_

Chief Power Engineer enterprises - this is a leadership position, therefore, only the director of the organization in which he got a job can accept or dismiss an employee who occupies it. To be hired, the candidate must have a higher technical education. In addition, it should be borne in mind that enterprises can engage in various activities in different industries and be responsible for different market sectors. An employee planning to receive such a position must have a long work experience of at least five years. Moreover, this experience should correspond to the industry in which the enterprise operates. And the employee must work these years either in a managerial or in an engineering position. The chief power engineer reports directly to the director of the organization.

What is guided by

A person who has received the position of "chief power engineer" must first of all be guided by documents of a legislative and regulatory type aimed at regulating the energy service of an enterprise.

Also at his disposal should be provided teaching materials concerning the issues of his direct activity. The chief power engineer is obliged to comply with the charter of the enterprise, to always be at the workplace. He has no right to violate the labor schedule. Subordinating to the chief director, he is obliged to fulfill all his orders and orders. You must also follow all the rules that contain job description chief power engineer.

What should know

When starting to perform the duties of the chief power engineer, the employee must learn and understand all the provisions of the Labor Code, orders and orders of his superiors, familiarize himself with the methodological and regulatory materials related to energy services this enterprise. Naturally, to understand what profile the organization has, what are the specifics of its activities. It is also important to understand the structure of the enterprise and possible ways of its development.

Chief power engineer: requirements

An employee in this position needs to know the basics of technology, how exactly products are manufactured at the enterprise, how the supply of electricity to production shops and other places is organized, how the system of scheduled preventive maintenance is arranged, and how to rationally use the resources of the enterprise equipment. Knowledge of the rules for the operation of devices that use electricity, their technical characteristics and production capacity is required.

Production

The chief power engineer should be aware of what methods are used to plan the operation of the equipment, what order they are turned on and off, and according to what schedule it is necessary to carry out repair work. The chief power engineer must be able to develop and draw up technical documentation in accordance with instructions, regulations and other governing materials. Know how equipment is received and returned after use and repair work. Understand what can hurt environment and not allow it.

Equipment

If equipment is being upgraded, as well as its operation or repair, the chief power engineer must know all the requirements of the manual in this regard. Also, the person holding this position must have information:

• how much fuel and energy should be spent for the operation of workshops and the enterprise as a whole;
• how to enter into contracts with other organizations to obtain any materials in order to supply the organization with electricity and other types of energy necessary for normal operation.

Also, the chief power engineer is supposed to know the labor legislation of the country, the basics of organizing production, economics and management. The labor protection instructions for the chief power engineer, safety precautions, fire protection and industrial sanitation standards must be observed.

Deputy Chief Power Engineer

If the employee holding the position of chief power engineer is absent from work, his duties are automatically taken over by the deputy, who is appointed either by the power engineer himself or by higher management. At the same time, the deputy is fully responsible for his actions and the correct performance of duties during the absence of the chief power engineer.

Functions

The main function of the employee holding the position of "chief power engineer" is the organization of work aimed at the energy service of the organization. According to the job description, the person holding the described position is responsible for the periodic professional development of all subordinates. The chief power engineer must provide healthy and safe working conditions for his staff, also control labor activity subordinates and their observance of all necessary regulations and rules.

Duties

To perform their functions fully, the employee must strictly fulfill the duties of the chief power engineer. At each enterprise, working conditions and requirements may be different, but there are basic ones that apply to any area of ​​activity of enterprises. The chief power engineer must ensure that all repair work with power equipment is carried out correctly and on time, control the saving of energy resources in the organization.

He is also responsible for the uninterrupted supply of electricity, water, steam, gas and other resources to the production, on which the continuity of the production process depends.

Also, the duties of the chief power engineer include managing the planning of the work of energy facilities, scheduling the repair work of energy networks and equipment, and calculating the consumption of energy resources. He must calculate and draw up requisitions that will contain information about the need to purchase parts or equipment, as well as other materials necessary to maintain the operation of the enterprise's energy systems. The person in this position must make calculations about minimizing energy consumption and increasing equipment productivity.

If the organization plans to reconstruct or modernize power equipment, the chief power engineer is obliged to participate in the preparation of plans in this regard and control the implementation of all necessary work device upgrades. After it has been carried out, he must participate in the system check, carry out all the necessary tests and check whether everything is working properly.

He controls and carries out work aimed at protecting underground utilities, checks the operation of communications, protective signaling systems and reports to government bodies for the operation of all devices working under pressure. The duties also include holding events for the exchange of experience and knowledge regarding the operation, repair and installation of power equipment. The Chief Power Engineer is responsible for the operation and manages all departments and employees ensuring the smooth operation of all power plants.

Rights

The job description of the chief power engineer includes the rights vested in the representative of this position. He has the right to represent the interests of the organization before competing or collaborating companies when it comes to energy services, or on other issues related to energy supply. He can also present plans and proposals to his superiors to improve the performance of his departments and employees. Offer to improve the use of energy resources, organize activities aimed at reducing fuel consumption and improving the operation of equipment in the organization. Approval and signature of documents are also available to the chief power engineer, but only within his official department. In addition, he has the right to receive reports and other information from employees that he needs for his work.

Personnel issues are also in his competence. He may propose to the authorities to dismiss, relocate or appoint employees on the basis of personal considerations, based on observations and experience. It is within his rights to encourage employees or, conversely, to charge them fines for poor performance of duties. And the last thing is that the chief power engineer has the right to ask the authorities for assistance if he himself, for some reason, is not able to fulfill certain duties.

Responsible work

The chief power engineer bears for his actions full responsibility. If he performs his duties poorly or ignores them altogether, he may receive the punishment prescribed in the Labor Code of the country for such cases. He may also be held criminally or administratively liable if he violates the law in the course of performing his official duties or his actions cause material damage to the enterprise. Depending on the amount of damage caused, the degree of punishment will be determined.

Career

Employees applying for the position of chief power engineer are needed in the most various companies. Basically, of course, representatives of this profession are required at enterprises where products are manufactured for various market segments. Before compiling a resume for a chief power engineer, it is advisable to decide in which particular area you want to work. Indeed, for each enterprise it is important that their future employee not only understands the work of the company, but also has experience with such equipment.

Since this position is a managerial one, few people manage to start their career from it. First you need to go through the path of promotions and gain experience. Mostly, this position is filled with professionals who have experience in leadership positions at least five years. And if we also take into account the previous experience in ordinary positions, then it approximately turns out that employers turn their attention to specialists over forty years old.

Moreover, prerequisite employment is the presence of higher technical education. Naturally, the requirements in each organization are individual, but in general, employers prefer experienced, educated specialists who know their business and are able to manage staff or even departments involved in providing the enterprise with electricity and other fuel resources, as well as responsible for the repair, maintenance and modernization of equipment necessary for production activities companies.

APPROVE:

[Job title]

_______________________________

_______________________________

[Name of company]

_______________________________

_______________________/[FULL NAME.]/

"______" _______________ 20___

JOB DESCRIPTION

Energy

1. General Provisions

1.1. This job description defines and regulates the powers, functional and job duties, rights and responsibilities of the power engineer [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. The power engineer is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The power engineer belongs to the category of specialists and is subordinate to [name of the position of subordinates in the dative case].

1.4. The power engineer reports directly to [position title of immediate supervisor in the dative case] of the Company.

1.5. A person with the appropriate qualifications is appointed to the position of power engineer:

Power engineer II category: higher professional (technical) education and work experience in the position of a power engineer or other engineering and technical positions to be filled by specialists with a higher vocational education, not less than 3 years.

Power engineer: higher vocational (technical) education without presenting requirements for work experience or secondary vocational (technical education and work experience as a technician of category I for at least 3 years or other positions filled by specialists with secondary vocational education for at least 5 years.

1.6. The power engineer is responsible for:

• effective performance of the work entrusted to him;
• compliance with the requirements of performance, labor and technological discipline;
• the safety of documents (information) in his custody (become known to him) containing (constituting) the commercial secret of the Company.

1.7. The power engineer should know:

• resolutions, orders, orders, methodological and regulatory materials for the operation of power equipment and communications;
• organization of energy economy;
• prospects for the technical development of the enterprise;
• technical characteristics, design features, operating modes and rules for the technical operation of power equipment;
• unified system preventive maintenance and rational operation of equipment;
• organization and technology of repair work;
• methods of installation, adjustment, adjustment and repair of power equipment;
• the procedure for drawing up applications for energy resources, equipment, materials, spare parts, tools;
• rules for the delivery of equipment for repair and acceptance after repair;
• fundamentals of production technology of the enterprise;
• requirements for the organization of labor in the operation, repair and modernization of power equipment;
• advanced domestic and overseas experience operation and repair of power equipment;
• fundamentals of economics, organization of production, labor and management;
• fundamentals of labor legislation;
• labor protection rules and regulations.

1.8. Energetik in his activities is guided by:

• local acts and organizational and administrative documents of the Company;
• internal labor regulations;
• rules of labor protection and safety, ensuring industrial sanitation and fire protection;
• instructions, orders, decisions and instructions of the immediate supervisor;
• this job description.

1.9. During the period of temporary absence of the power engineer, his duties are assigned to [name of the position of the deputy].

2. Job responsibilities

The power engineer is obliged to carry out the following labor functions:

2.1. Ensures uninterrupted operation, proper operation, repair and modernization of power equipment, electrical and heat networks, air and gas pipelines.

2.2. Determines the need for production in fuel and energy resources, prepares the necessary justifications for technical re-equipment, development of energy facilities, reconstruction and modernization of energy supply systems.

2.3. Draws up applications for the purchase of equipment, materials, spare parts necessary for the operation of the energy sector, performs calculations with the necessary justifications for measures to save energy resources, the needs of the enterprise's divisions in electrical, thermal and other types of energy, participates in the development of their consumption rates, the operating mode of the divisions of the enterprise, based on their energy needs.

2.4. Monitors compliance with the norms of fuel consumption and all types of energy.

2.5. Draws up schedules for reducing energy loads during peak hours of the energy system and ensures their implementation within the value determined for the enterprise unit, carries out certification of energy, electrical and environmental installations installed at the enterprise.

2.6. Participates in the testing and acceptance of power plants and networks for commercial operation, in considering the causes of accidents in power equipment and develops measures to prevent them, create safe working conditions.

2.7. Organizes inspection and testing of relay protection and automation.

2.8. Carries out technical supervision of control and measuring, electrical and heat engineering devices used at the enterprise, and also provides preparation of boilers, pressure vessels, steam and hot water pipelines, electrical installations and other energy facilities for acceptance into operation, inspection and certification by state authorities supervision.

2.9. Monitors compliance with operating instructions maintenance and supervision of power equipment and electrical networks.

2.10. Participates in the development and implementation of standards and specifications for power equipment.

2.11. Prepares the necessary materials for the conclusion of contracts for the repair of equipment with contractors.

2.12. Supervises the implementation of capital and other repairs of power equipment.

2.13. It studies and summarizes the best domestic and foreign experience in the rational use and saving of fuel and energy resources, promotes its implementation, as well as the development of creative initiative and activity of employees.

2.14. Ensures compliance with the rules and norms of labor protection during the operation and repair of power plants and electrical networks.

2.15. Prepares reports in accordance with approved forms and indicators.

In case of official necessity, a power engineer may be involved in the performance of his official duties overtime, in the manner prescribed by the provisions of federal labor legislation.

3. Rights

The power engineer has the right:

3.1. To give instructions to subordinate employees and services, tasks on a range of issues included in his functional duties.

3.2. To control the fulfillment of production tasks, the timely execution of individual orders and tasks by subordinate services.

3.3. Request and receive the necessary materials and documents related to the activities of the power engineer, his subordinate services and divisions.

3.4. Interact with other enterprises, organizations and institutions on production and other issues related to the competence of the power engineer.

3.5. Sign and endorse documents within their competence.

3.6. Submit for consideration by the head of the Company submissions on the appointment, transfer and dismissal of employees of subordinate units; proposals for their promotion or for the imposition of penalties on them.

3.7. To exercise other rights established Labor Code Russian Federation and other legislative acts of the Russian Federation.

4. Responsibility and performance evaluation

4.1. The power engineer bears administrative, disciplinary and material (and in individual cases provided for by the legislation of the Russian Federation - and criminal) liability for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of their labor functions and assigned tasks.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. The assessment of the work of the power engineer is carried out:

4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Certification Commission enterprises - periodically, but at least once every two years, based on the documented results of work for the evaluation period.

4.3. The main criterion for evaluating the work of a power engineer is the quality, completeness and timeliness of his performance of the tasks provided for by this instruction.

5. Working conditions

5.1. The work schedule of a power engineer is determined in accordance with the internal labor regulations established by the Company.

6. Right to sign

6.1. To ensure his activities, the power engineer is granted the right to sign organizational and administrative documents on issues referred to his competence by this job description.

Familiarized with the instruction ___________ / ____________ / "____" _______ 20__

Single qualification guide positions of managers, specialists and other employees (CEN), 2019
Qualification directory of positions of managers, specialists and other employees
Sections « Industry-wide qualification characteristics of the positions of employees employed at enterprises, institutions and organizations" and " Qualification characteristics of the positions of employees employed in research institutions, design, technological, design and survey organizations”, approved by the Decree of the Ministry of Labor of the Russian Federation of August 21, 1998 N 37
(version dated 05/15/2013)

Chief Power Engineer

Job responsibilities. Organizes technically correct operation and timely repair of energy and environmental protection equipment and energy systems, uninterrupted supply of electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent compliance with the savings regime. Manages the organization and planning of the work of power plants and farms, the development of repair schedules for power equipment and power networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy by the enterprise. Ensures the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electric and thermal energy to the enterprise and the connection of additional capacity to energy supply enterprises, the development of measures to reduce energy consumption rates, the introduction new technology, contributing to more reliable, economical and safe operation of power plants, as well as increasing labor productivity. Participates in the development of plans for the long-term development of the energy sector, plans to improve production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of funds integrated mechanization and automation of production processes, in considering projects for the reconstruction and modernization of power supply systems of the enterprise and its divisions, in drawing up technical specifications for the design of new and reconstruction of existing power facilities. Gives conclusions on the developed projects, participates in testing and acceptance of power plants and networks for commercial operation. Ensures work on the protection of underground structures and communications, organizes the verification of communications, signaling, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the authorities exercising state technical supervision. Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, the reliability and efficiency of power plants, the prevention of accidents, the creation of safe and favorable working conditions during their operation. Carries out control over compliance with the rules of labor protection and safety, instructions for the operation of power plants and the use of power equipment and networks. Concludes contracts with third-party organizations for the supply of the enterprise with electricity, steam, water and other types of energy, monitors their implementation. Organizes the storage, accounting of the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes. Carries out work on the exchange of experience in the field of operation of power equipment, saving and rational use of fuel and energy resources, contributes to the achievement of high performance in the operation of power plants. Ensures the improvement of the organization of labor in the areas of energy facilities, certification and rationalization of jobs, the introduction of new progressive methods of repair and operation of power equipment. Gives opinions on rationalization proposals and inventions related to the improvement of power equipment and energy supply, organizes the implementation of the adopted proposals. Supervises the employees of the department and subdivisions of the enterprise that provide energy services to production, organizes work to improve the skills of employees.

Must know: regulatory and methodological materials on the energy service of the enterprise; profile, specialization and features of the organizational and technological structure of the enterprise, prospects for its development; fundamentals of production technology of the enterprise; organization of energy supply of production in the industry and at the enterprise; Unified system of preventive maintenance and rational operation of equipment; production capacities, technical characteristics, design features and modes of operation of power equipment, power-using installations, rules for their operation; the procedure and methods for planning the operation of equipment and the production of repair work; regulations, instructions and other guidelines for the development and execution technical documentation; rules for acceptance and delivery of equipment after installation and repair; environmental legislation; requirements for the rational organization of labor in the operation, repair and modernization of power equipment; the procedure for developing norms for the consumption of fuel and energy resources; the procedure for concluding contracts for the supply of an enterprise with electricity, steam, water and other types of energy; advanced domestic and foreign experience in the field of energy supply for production; fundamentals of economics, organization of production, labor and management; fundamentals of labor legislation; labor protection rules and regulations.

Qualification requirements. Higher professional (technical) education and work experience in the specialty in engineering and management positions in the corresponding profile of the enterprise in the sector of the national economy for at least 5 years.

Chief Power Engineer must match the following qualification requirements- get a higher technical education and work experience in the specialty in engineering and management positions for at least 5 years.

Responsibilities of the Chief Power Engineer

The chief power engineer organizes the technically correct operation and timely repair of energy and environmental protection equipment and energy systems, uninterrupted supply of electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent compliance with the savings regime.

Manages the planning of the work of power plants and farms, the development of repair schedules for power equipment and power networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy by the enterprise.

Ensures the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electric and thermal energy to the enterprise and the connection of additional power to energy supply enterprises, the development of measures to reduce energy consumption rates, the introduction of new equipment that contributes to a more reliable, economical and safe operation of power plants, as well as increasing labor productivity.

The chief power engineer participates in the development of plans for the long-term development of the energy sector, plans to increase production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of integrated mechanization and automation production processes, in considering projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in drawing up technical specifications for the design of new and reconstruction of existing energy facilities.

Ensures work on the protection of underground structures and communications, organizes the verification of communications, signaling, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the Gosgortekhnadzor inspection. Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, the reliability and efficiency of power plants, the prevention of accidents, the creation of safe and favorable working conditions during their operation.

Carries out control over compliance with the rules of labor protection and safety, instructions for the operation of power plants and the use of power equipment and networks.

The Chief Power Engineer concludes contracts with third-party organizations for the supply of the enterprise with electricity, steam, water and other types of energy, and monitors their implementation.

Organizes the storage, accounting of the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.

Carries out work on the exchange of experience in the field of operation of power equipment, ensures the implementation scientific organization labor in the areas of energy, certification and rationalization of jobs, new progressive methods of repair and operation of power equipment. Gives opinions on rationalization proposals and inventions related to the improvement of power equipment and energy supply, organizes the implementation of the adopted proposals.

The chief power engineer supervises the employees of the department and subdivisions of the enterprise that provide energy services to production.

Feedback and suggestions can be sent to energ2010@yandex.ru

The information is provided for information only and is not an official source.

Chief Power Engineer: Requirements, Knowledge and Responsibilities

Few people know that in large factories and enterprises one of the most important people is the chief power engineer. He monitors the distribution of energy resources: electricity, heat. He also organizes reliable power supply, competent technical operation of energy systems, which affects the profitability of any enterprise. At any more or less large plant, this position is held in high esteem, but it requires huge amount knowledge and experience.

Main responsibilities

The chief power engineer organizes the correct operation, repair and installation of power equipment, uninterrupted and reliable power supply for production. Given executive controls the expenditure of energy resources, compliance with the regime of their saving. The Department of the Chief Power Engineer deals with the planning, organization and implementation of the efficient operation of the energy sector, develops schedules for the repair of equipment and electrical networks, plans for the production or consumption of electricity, fuel, gas, steam, water. This official is engaged in drawing up applications and settlements to them for the purchase of equipment, spare parts and necessary materials, for the supply of energy, for connection, if necessary, additional power. Plans the prospects for the development of the energy sector, improving the overall efficiency of production, prepares proposals for the reconstruction of the enterprise, introduces process automation tools.

The job description of the chief power engineer necessarily includes consideration of projects for the reconstruction of energy supply systems. The leading power engineer is obliged to give opinions on all developed electric power projects, to take part in the testing of power plants and networks. He is also obliged to ensure the development of measures aimed at increasing the efficiency of resource use, improving the reliability and operation of power plants, preventing accidents, and creating safe working conditions. The chief power engineer monitors compliance with the rules of labor protection, safety measures, all necessary instructions for operation. He must and has the right to conclude contracts for the supply of electricity and other types of energy. This person organizes accounting and storage of energy equipment on the balance sheet of the enterprise, analysis of fuel and electricity consumption. The chief power engineer supervises all employees of his department, organizes work to improve their qualifications, recruits new personnel, deals with retraining issues if necessary, and conducts the necessary certification of personnel.

What should you know?

Methodical and normative materials on electric power service of this or that enterprise. Must understand the specialization, profile and characteristics of the enterprise, opportunities and prospects, the basics of production. Mandatory knowledge of the system of planned and preventive repairs includes his job description. The chief power engineer is also required to know the technical characteristics and features of the operation of the equipment at the enterprise, the rules for operating these installations. The job description includes requirements for knowledge of the rules for receiving equipment after repair and installation, environmental legislation. The chief power engineer must be able to conclude contracts for the supply of electricity and heat to the company.

Requirements

The chief engineer of the enterprise must have a higher technical education. In addition, at least five years of work experience in a profile specialty in administrative, technical and managerial positions in the relevant industry is required. In addition to having quite extensive skills and knowledge, the leading power engineer is required to have organizational skills, as he manages his personnel.

Services supervised by the chief power engineer

There are several services that are subordinate to this official:

Electrical service, which includes operational, repair and duty personnel;

Thermal engineering, which manages boiler rooms, drainage and water supply services and which includes plumbers and maintenance personnel;

Gas service, which includes employees involved in the repair and operation of gas systems.

Job description of the chief power engineer

"____" ____________ 20__

1.1. This job description defines the functional duties, rights and responsibilities of the chief power engineer [Name of organization in the genitive case] (hereinafter referred to as the Company).

1.2. The Chief Power Engineer is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the head of the Company.

1.3. The Chief Power Engineer reports directly to [position title of immediate supervisor in the dative case] of the Company.

1.4. The chief power engineer belongs to the category of managers and is subordinate to [name of positions of subordinates in the dative case].

1.5. A person who has a higher professional (technical) education and work experience in the specialty in engineering and management positions in the corresponding profile of the enterprise in the national economy for at least 5 years is appointed to the position of chief power engineer.

1.6. The Chief Power Engineer is responsible for:

• effective performance of the work entrusted to him;
• compliance with the requirements of performance, labor and energy discipline;
• the safety of the documents (information) that are in his custody (become known to him), containing (constituting) the trade secret of the organization.

1.7. The Chief Power Engineer must know:

• regulatory and methodological materials on the energy service of the enterprise;
• profile, specialization and features of the organizational and technological structure of the enterprise, prospects for its development;
• fundamentals of production technology of the enterprise;
• organization of energy supply of production in the industry and at the enterprise;
• Unified system of preventive maintenance and rational operation of equipment;
• production capacities, technical characteristics, design features and modes of operation of power equipment, power-using installations, rules for their operation;
• the procedure and methods for planning the operation of equipment and the production of repair work;
• regulations, instructions and other guidance materials on the development and execution of technical documentation;
• rules for acceptance and delivery of equipment after installation and repair;
• environmental legislation;
• requirements for the rational organization of labor in the operation, repair and modernization of power equipment;
• the procedure for developing norms for the consumption of fuel and energy resources;
• the procedure for concluding contracts for the supply of an enterprise with electricity, steam, water and other types of energy;
• advanced domestic and foreign experience in the field of energy supply for production;
• fundamentals of economics, organization of production, labor and management;
• fundamentals of labor legislation;
• labor protection rules and regulations.

1.8. The Chief Power Engineer in his activities is guided by:

• local acts and organizational and administrative documents of the Company;
• internal labor regulations;
• rules of labor protection and safety, ensuring industrial sanitation and fire protection;
• instructions, orders, decisions and instructions of the immediate supervisor;
• this job description.

1.9. During the temporary absence of the chief power engineer, his duties are assigned to [name of the position of the deputy].

2. Functional responsibilities

The Chief Power Engineer performs the following labor functions:

2.2. Manages the organization and planning of the work of power plants and farms, the development of repair schedules for power equipment and power networks, plans for the production and consumption of electricity, process fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy by the enterprise.

2.3. Ensures the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electric and thermal energy to the enterprise and the connection of additional power to energy supply enterprises, the development of measures to reduce energy consumption rates, the introduction of new technology that contributes to a more reliable, economical and safe operation of power plants, as well as increasing labor productivity.

2.4. Participates in the development of plans for the long-term development of the energy sector, plans to improve production efficiency, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of integrated mechanization and automation of production processes, in the consideration of projects for the reconstruction and modernization of the energy supply systems of the enterprise and its divisions, in the preparation of technical specifications for design of new and reconstruction of existing power facilities.

2.5. Gives conclusions on the developed projects, participates in testing and acceptance of power plants and networks for commercial operation.

2.6. Ensures work on the protection of underground structures and communications, organizes the verification of communications, signaling, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the authorities exercising state technical supervision.

2.7. Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, the reliability and efficiency of power plants, the prevention of accidents, the creation of safe and favorable working conditions during their operation.

2.8. Carries out control over compliance with the rules of labor protection and safety, instructions for the operation of power plants and the use of power equipment and networks.

2.9. Concludes contracts with third-party organizations for the supply of the enterprise with electricity, steam, water and other types of energy, monitors their implementation.

2.10. Organizes the storage, accounting of the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.

2.11. Carries out work on the exchange of experience in the field of operation of power equipment, savings and rational use fuel and energy resources, contributes to the achievement of high performance in the operation of power plants.

2.12. Ensures the improvement of the organization of labor in the areas of energy facilities, certification and rationalization of jobs, the introduction of new progressive methods of repair and operation of power equipment.

2.13. Gives opinions on rationalization proposals and inventions related to the improvement of power equipment and energy supply, organizes the implementation of the adopted proposals.

2.14. Supervises the employees of the department and subdivisions of the enterprise that provide energy services to production, organizes work to improve the skills of employees.

In case of official necessity, the chief power engineer may be involved in the performance of his duties overtime, in the manner prescribed by the provisions of federal labor legislation.

3.2. To control the fulfillment of production tasks, the timely execution of individual orders and tasks by subordinate services.

3.3. Request and receive the necessary materials and documents related to the activities of the chief power engineer, his subordinate services and divisions.

3.4. Interact with other enterprises, organizations and institutions on production and other issues related to the competence of the chief power engineer.

4. Responsibility and performance evaluation

4.1. The Chief Power Engineer bears administrative, disciplinary and material (and in some cases, provided for by the legislation of the Russian Federation, also criminal) responsibility for:

4.1.1. Non-fulfillment or improper fulfillment of official instructions of the immediate supervisor.

4.1.2. Failure to perform or improper performance of their labor functions and assigned tasks.

4.1.3. Unlawful use of the granted official powers, as well as their use for personal purposes.

4.1.4. Inaccurate information about the status of the work entrusted to him.

4.1.5. Failure to take measures to suppress the identified violations of safety regulations, fire and other rules that pose a threat to the activities of the enterprise and its employees.

4.1.6. Failure to enforce labor discipline.

4.2. The evaluation of the work of the chief power engineer is carried out:

4.2.1. Direct supervisor - regularly, in the course of the daily implementation by the employee of his labor functions.

4.2.2. Attestation Commission of the enterprise - periodically, but at least once every two years based on the documented results of the work for the evaluation period.

4.3. The main criterion for evaluating the work of the chief power engineer is the quality, completeness and timeliness of his performance of the tasks provided for by this instruction.

5.1. The work schedule of the chief power engineer is determined in accordance with the internal labor regulations established by the Company.

5.2. In connection with the production need, the chief power engineer is obliged to travel to business trips(including local values).

5.3. In connection with the production need, the chief power engineer may be provided with official vehicles to carry out his labor functions.

6.1. To ensure his activities, the Chief Power Engineer is granted the right to sign organizational and administrative documents on issues that are part of his functional duties.

Familiarized with the instruction ___________ / ____________ / "____" _______ 20__

Responsibilities of the chief power engineer at the enterprise

1.1. This job description defines the functional duties, rights and responsibilities of the Chief Power Engineer of the enterprise.

1.2. The chief power engineer is appointed to the position and dismissed from the position in accordance with the procedure established by the current labor legislation by order of the director of the enterprise.

1.3. The chief power engineer reports directly to the director of the enterprise.

1.4. A person who has a higher professional (technical) education and work experience in the specialty in engineering and management positions in the industry corresponding to the profile of the enterprise is appointed to the position of the Chief Power Engineer.

1.5. The Chief Power Engineer must know:

Regulatory and methodological materials on the energy service of the enterprise; profile, specialization and features of the organizational and energy structure of the enterprise, prospects for its development; the basics of the energy production of the enterprise's products; organization of energy supply of production in the industry and at the enterprise; Unified system of preventive maintenance and rational operation of equipment; production capacities, technical characteristics, design features and modes of operation of power equipment, power-using installations, rules for their operation; the procedure and methods for planning the operation of equipment and the production of repair work; labor during the operation, repair and modernization of power equipment; the procedure for developing norms for the consumption of fuel and energy resources; the procedure for concluding contracts for the supply of an enterprise with electricity, steam, water and other types of energy; advanced domestic and foreign experience in the field of energy supply for production; fundamentals of economics, organization of production, labor and management; fundamentals of labor legislation; rules and norms of labor protection, regulatory and methodological materials on the energy preparation of production; profile, specialization and features of the organizational and energy structure of the enterprise; prospects for the technical development of the industry and enterprise; energy production of the company's products; systems and design methods; organization of energy preparation of production in the industry and at the enterprise; production capacities, technical characteristics, design features and operating modes of equipment, rules for its operation; the procedure and methods for planning the energy preparation of production; technical requirements for raw materials, materials and finished products; regulations, instructions and other guidance materials on the development and execution of technical documentation; means of mechanization and automation of production processes; determination methods economic efficiency introduction of new technology and energy, labor organization, rationalization proposals and inventions; quality certification procedure industrial products; the possibility of using computer technology and methods for designing energy processes with their use; procedure for acceptance of equipment into operation; requirements for rational organization of labor in the design of energy processes; domestic and foreign achievements of science and technology in the relevant industry; advanced domestic and foreign experience in the production of similar products; fundamentals of economics, organization of production, labor and management; fundamentals of environmental legislation; fundamentals of labor legislation; labor protection rules and regulations.

1.6. During the period of temporary absence of the Chief Power Engineer, his duties are assigned to ___________________________.

2. FUNCTIONAL RESPONSIBILITIES

Note. The functional responsibilities of the Chief Power Engineer are determined on the basis and to the extent qualification characteristic by the position of the Chief Power Engineer and can be supplemented, clarified when preparing the job description based on specific circumstances.

2.1. Organizes technically correct operation and timely repair of energy and environmental protection equipment and energy systems, uninterrupted supply of electricity, steam, gas, water and other types of energy, control over the rational use of energy resources at the enterprise, consistent compliance with the savings regime.

2.2. Manages the organization and planning of the work of power plants and farms, the development of repair schedules for power equipment and power networks, plans for the production and consumption of electricity, power fuel, steam, gas, water, compressed air, consumption rates and modes of consumption of all types of energy by the enterprise.

2.3. Ensures the preparation of applications and the necessary calculations for them for the purchase of power equipment, materials, spare parts, for the supply of electric and thermal energy to the enterprise and the connection of additional capacity to production, in the preparation of proposals for the reconstruction, technical re-equipment of the enterprise, the introduction of means of complex mechanization and automation of production processes , in considering projects for the reconstruction and modernization of energy supply systems of the enterprise and its divisions, in drawing up technical specifications for the design of new and reconstruction of existing energy facilities.

2.4. Gives conclusions on the developed projects, participates in testing and acceptance of power plants and networks for commercial operation.

2.5. Ensures work on the protection of underground structures and communications, organizes the verification of communications, signaling, accounting, control, protection and automation, as well as the timely presentation of boilers and pressure vessels to the authorities exercising state technical supervision.

2.6. Organizes the development of measures to improve the efficiency of the use of fuel and energy resources, the reliability and efficiency of power plants, the prevention of accidents, the creation of safe and favorable working conditions during their operation. Carries out control over compliance with the rules of labor protection and safety, instructions for the operation of power plants and the use of power equipment and networks.

2.7. Concludes contracts with third-party organizations for the supply of the enterprise with electricity, steam, water and other types of energy, monitors their implementation.

2.8. Organizes the storage, accounting of the presence and movement of energy equipment located at the enterprise, as well as accounting and analysis of electricity and fuel consumption, technical and economic indicators of the energy sector, accidents and their causes.

2.9. Carries out work on the exchange of experience in the field of operation of power equipment, saving and rational use of fuel and energy resources, contributes to the achievement of high performance in the operation of power plants.

2.10. Ensures the improvement of the organization of labor in the areas of energy facilities, certification and rationalization of jobs, the introduction of new progressive methods of repair and operation of power equipment.

2.11. Gives opinions on rationalization proposals and inventions related to the improvement of power equipment and energy supply, organizes the implementation of the adopted proposals.

2.12. Supervises the employees of the department and subdivisions of the enterprise that provide energy services to production, organizes work to improve the skills of employees.

3. RIGHTS

The chief power engineer has the right:

3.1. To give instructions to subordinate employees and services, tasks on a range of issues included in his functional duties.

3.2. To control the fulfillment of production tasks, the timely execution of individual orders by subordinate services and divisions.

3.3. Request and receive the necessary materials and documents related to the activities of the Chief Power Engineer, his subordinate services and divisions.

3.4. Interact with other enterprises, organizations and institutions on energy supply and other issues related to the competence of the Chief Power Engineer.

4. RESPONSIBILITY

The Chief Power Engineer is responsible for:

4.1. The results and efficiency of production activities related to its functional duties specified in section 2 of this manual.

4.2. Inaccurate information about the status of the implementation of work plans of subordinate services and divisions.

4.3. Failure to comply with orders, instructions and instructions of the director of the enterprise.

4.4. Failure to take measures to suppress the identified violations of safety regulations, fire safety and other rules that pose a threat to the activities of the enterprise, its employees.

4.5. Failure to ensure compliance with labor and performance discipline by employees of subordinate services and employees who are subordinate to the Chief Power Engineer.

5. RIGHT TO SIGN. OPERATING MODE

5.1. To ensure his activities, the Chief Power Engineer is granted the right to sign organizational and administrative documents on issues that are part of his functional duties.

5.2. The mode of operation of the Chief Power Engineer is determined in accordance with the Internal Labor Regulations established at the enterprise.

5.3. Due to production needs, the Chief Power Engineer may go on business trips (including local ones).

5.4. To resolve operational issues to ensure production activities, the Chief Power Engineer may be provided with official vehicles.