0.1. The document comes into force from the moment of its approval.

0.2. Document developer: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.3. Document approved: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.

0.4. Periodic verification of this document is carried out at intervals not exceeding 3 years.

1. General Provisions

1.1. Position "Engineer automated systems production management" belongs to the category "Professionals".

1.2. Qualifications- leading engineer of automated production control systems: complete higher education in the relevant field of study (master, specialist). Work experience as an engineer in automated production control systems of category I - at least 2 years. Engineer of automated production control systems of the 1st category: complete higher education in the relevant field of study (master, specialist); for a master's degree - no requirements for work experience, a specialist - at least 2 years of experience in the profession of an engineer in automated production control systems of the II category - at least 2 years. Engineer of automated production control systems II category: complete higher education in the relevant area of ​​training (specialist). Work experience as an engineer in automated production control systems - at least 1 year. Engineer of automated production control systems: complete higher education in the relevant area of ​​training (specialist) without requirements for work experience.

1.3. Knows and applies:
- resolutions, orders, orders, methodological, regulatory and other guidance materials on the organization of automated production control systems;
- prospects for the development of production;
- organization of economic planning and operational regulation of production;
- the structure of the enterprise, production and functional relations between its divisions;
- tasks and composition of the automated control system;
- the procedure for the development of projects for automated control systems and its subsystems, technical specifications, technical and working projects;
- means of computer technology, communications and communications;
- economic and mathematical methods;
- fundamentals of the theory of economic cybernetics;
- the order of setting tasks, their algorithmization;
- methods of determination economic efficiency introduction of automated control systems;
- standards of the unified system of organizational and administrative documentation;
- the order of development and execution technical documentation;
- fundamentals of economics, organization of labor, production;
- Fundamentals of labor law.

1.4. An engineer of automated production control systems is appointed to the position and dismissed by order of the organization (enterprise / institution).

1.5. The Production Control Engineer reports directly to _ _ _ _ _ _ _ _ _ _ .

1.6. The engineer of automated production control systems directs the work _ _ _ _ _ _ _ _ _ _ .

1.7. The engineer of automated production control systems during his absence is replaced by a duly appointed person who acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

2. Description of work, tasks and job responsibilities

2.1. Performs work on the design and implementation of automated production control systems based on the use of a combination of economic and mathematical methods, modern technical means processing, transmission and display of information, elements of the theory of economic cybernetics.

2.2. It studies the system and methods of managing and regulating the activities of the enterprise, its production and functional divisions, determines the possibility of formalizing the elements of the current system and the feasibility of their transfer to an automated mode.

2.3. Carries out the preparation of the necessary data and takes part in the preparation of the terms of reference for the design of the automated control system and its individual stages and subsystems, in the development of technical and working projects.

2.4. Formulates the formulation of tasks, performs work on their algorithmization, discovers the possibility of typing solutions for individual elements of the system, prepares proposals regarding the use of standard blocks in the design of automated control systems and participates in their creation.

2.5. Studying developed design organizations and systems operating at other enterprises automated control production in order to use best practices in the design and operation of automated control systems.

2.6. Participates in the work to improve the workflow at the enterprise, formulates requirements for the content and structure of technical and organizational and administrative documentation used in the automated production control system.

2.7. Develops technological schemes information processing in accordance with the established tasks of the automated control system, taking into account the organizational and technical support of all subsystems.

2.8. Prepares projects teaching materials, instructions and other technical documentation related to the creation and use of funds for the information use of automated control systems.

2.9. Participates in the work on debugging, trial operation and phased introduction of a complex of technical means of automated control systems.

2.11. It studies the causes of failures and violations in the system, develops proposals for their elimination and prevention, for improving the quality and reliability of the automated control system.

2.12. Provides methodological assistance to the divisions of the enterprise in the preparation of data for the automated control system, registration required documents and decoding of information processed by means of computer technology.

2.13. Knows, understands and applies existing regulations relating to his activities.

2.14. Knows and complies with the requirements of normative acts on labor protection and environment, complies with the norms, methods and techniques for the safe performance of work.

3. Rights

3.1. The production control system engineer has the right to take action to prevent and eliminate the occurrence of any violations or inconsistencies.

3.2. An engineer of automated production control systems has the right to receive all social guarantees provided for by law.

3.3. The engineer of automated production control systems has the right to demand assistance in the performance of his official duties and exercise of rights.

3.4. The engineer of automated production control systems has the right to demand the creation of organizational and technical conditions necessary for the performance of official duties and the provision necessary equipment and inventory.

3.5. The engineer of automated production control systems has the right to get acquainted with the draft documents relating to his activities.

3.6. The engineer of automated production control systems has the right to request and receive documents, materials and information necessary for the performance of his duties and orders of the management.

3.7. An engineer of automated production control systems has the right to improve his professional qualifications.

3.8. The engineer of automated production control systems has the right to report all violations and inconsistencies identified in the course of his activities and make proposals for their elimination.

3.9. The engineer of automated production control systems has the right to get acquainted with the documents that define the rights and obligations of the position held, the criteria for assessing the quality of the performance of official duties.

4. Responsibility

4.1. The engineer of automated production control systems is responsible for non-fulfillment or untimely fulfillment of the duties assigned by this job description and (or) non-use of the rights granted.

4.2. The engineer of automated production control systems is responsible for non-compliance with the rules of internal labor regulations, labor protection, safety, industrial sanitation and fire protection.

4.3. The engineer of automated production control systems is responsible for the disclosure of information about the organization (enterprise / institution) that is a trade secret.

4.4. The engineer of automated production control systems is responsible for non-fulfillment or improper fulfillment of the requirements of the internal regulatory documents of the organization (enterprise / institution) and the legal orders of the management.

4.5. The engineer of automated production control systems is responsible for offenses committed in the course of his activities, within the limits established by the current administrative, criminal and civil legislation.

4.6. The engineer of automated production control systems is responsible for causing material damage to the organization (enterprise / institution) within the limits established by the current administrative, criminal and civil legislation.

4.7. The engineer of automated production control systems is responsible for the misuse of the granted official powers, as well as their use for personal purposes.

If you are considering other options (in addition to employment as an industrial control engineer), then do not limit yourself to this selection of ads, in our many other positions for different positions. There you can also use the search for offers of direct employers and agencies.

Current vacancies

Applicant requirements:

Wage: from 50000 rub. per month

Applicant requirements:

1. Experience in developing SCADA projects and HMI operator panels. 2. Understanding the construction of industrial information networks Ethernet, RS-485, as well as experience with Modbus data exchange protocols (RTU, TCP). 3. Experience with programmable logic controllers at a basic level. 4. Ability to read functional diagrams of automation and electrical circuit diagrams; 5. Understanding the operation of field equipment and actuators; 6. Knowledge in English at the level of reading manuals.

Salary: up to 60,000 rubles. per month

Applicant requirements:

Higher education Experience from 5 years Knowledge of systems computer-aided design(AutoCad)

Salary: from 65,000 to 80,000 rubles. per month

Applicant requirements:

Higher technical education Professional knowledge of PC Understanding MODBUS, 485, modbus tcp/rtu Understanding the principles of process control systems, simple automation, relays, protection, programming zeliologic or other smart relays. Understanding of PLC principles. Perseverance and courage in making decisions Ability to work with "tester" measuring instruments Ability to program PLC schneider m340, m580 Ability to work with Vijeo Designer, Unity Pro. Understanding the principles of operation of metrological equipment (sensors, flow meters) Understanding the principles of switching automation cabinets to quickly identify the problem

Salary: by agreement.

Applicant requirements:

Higher specialized education. At least 3 years of experience in a manufacturing company in a similar position Knowledge of operational requirements and characteristics of the functional software APCS.

Salary: from 80,000 rubles. per month

Applicant requirements:

Higher technical education - Knowledge of low-voltage and switchboard equipment of ABB, Siemens, Schneider Electric, Legrand, RF, etc. - Microsoft Office(MS Word, MS Excel, MS Access), Acrobat Reader, AutoCad, software of the manufacturer of the selected controller Desirable: Panel Design Configurator, Rapsody, Simaris design teams - sociability, learning, attentiveness, purposefulness

Salary: by agreement.

Applicant requirements:

Knowledge of AutoCad; Experience with SCADA and HMI: WinCC, IFIX, Citect, Vijeo-Designer; Knowledge and experience with programmable logic; controllers: Schneider Electric, Siemens; Availability of own implemented projects; Work experience with field equipment: frequency converters, instrumentation and control devices; Experience with industrial networks: Profibus, Profinet, Modbus, OPC, Industrial Ethernet; Knowledge of English (technical) is desirable.

Salary: from 60,000 to 80,000 rubles. per month

Applicant requirements:

Knowledge of programming languages ​​LD, FBD. knowledge of the basic nomenclature of automation components, types of signals, types of sensors. Ability to work with a metalwork tool grinder, drill. Electrical circuit design. Desire and ability to work on business trips throughout Russia Far East, Polar circle.

Salary: up to 52,000 rubles. per month

Applicant requirements:

Higher or secondary specialized technical education. Experience in APCS for manufacturing plant from a year.

Salary: by agreement.

Applicant requirements:

Higher technical education in the field of automation or acquired (higher technical education is not specialized, but obtained through courses, practical experience or self-education); English language requirements: reading technical information; Knowledge modern systems controls, elements of industrial electronics Siemens, Allen Bradley, Omron, etc. Deep understanding modern approaches to serial control systems industrial equipment, security systems, element base and standard solutions; Knowledge of the principles of network organization (interaction of technological equipment, external access, network equipment, management, etc.) with the protection elements of these networks; Ability and practical knowledge of methods of diagnosing and searching for root causes in case of failures in the control system of equipment, damage to control system elements, software, actuators; Ability and knowledge of special software for diagnostics and communication; (Step 7, WinCC, TIA Portal, RSLogix, etc.) The ability to make changes (improvements or adjustments) to program work equipment, PLC and SCADA. Knowledge and practical experience programming controllers Allen Bradley. (Knowledge of IEC 61131-3 languages) Knowledge and ability to work with data transfer protocols (RS232, RS485, etc.) Confidently read electrical and control diagrams. Know the most commonly used programmable logic controllers, frequency converters, servo systems and other automation equipment in enterprises; Deep knowledge in the field of electrical safety; Good knowledge and practical experience of types and methods of preventive maintenance of automation and power supply equipment (from control panels to actuators). That is, a clear understanding of the plan and the content of the maintenance work. Understanding of troubleshooting algorithms.

Salary: from 65,000 rubles. per month

Applicant requirements:

Profile technical higher education Relevant work experience of at least 1 year Knowledge of electronics, principles of building process control systems Experience in commissioning industrial enterprises companies ( Sverdlovsk region, KhMAO).

Applicant requirements:

3 years experience in a similar position. profile education. Must know: resolutions, orders, orders, methodological and regulatory materials on the organization of commissioning of automation equipment; local regulation and control systems based on microprocessor technology, including VFD; operational requirements and characteristics of the functional software of process control systems; rules for the technical operation of consumer electrical installations; main technological processes of water treatment; basic principles of operation of the equipment included in the installations; methods of installation, adjustment and adjustment of equipment; control means, instruments and devices used in the verification, adjustment and testing of the serviced equipment; procedure and methods for planning installation, commissioning and testing work; organization of installation, adjustment and repair work, testing of automation equipment; the procedure for the development and execution of technical documentation; fundamentals of labor law

Salary: from 35,000 rubles. per month

Applicant requirements:

Specialized secondary education, incomplete higher, higher, students of 2-5 courses can be hired - Advanced PC user - Experience with AutoCad, Visio - Experience in assembling electrical panels and automation circuits - Experience in amateur radio - Experience with CNC machines is welcome - Knowledge of components industrial electrics, electronics - industrial controllers and software, frequency converters, DC drives, encoders, sensors. - The experience of the developer of automation systems, the ability to program the PLC is welcome - Experience with servo motors, stepper motors - Knowledge of robotics is welcome - Personal qualities - hardworking, executive, attentive, with developed analysis skills and an inventive streak, positive attitude

Salary: by agreement.

Applicant requirements:

Higher, specialized education Experience in a similar position in food enterprise from 5 years Knowledge of modern electronic equipment used in engineering, the ability to read circuit diagrams, the ability to work with sensors, measuring instruments, the ability to configure and program controllers. Diagnostics of industrial equipment and troubleshooting and parts of automation. Knowledge of electronics, electrical, pneumatics. Knowledge of English (reading technical documentation) Communication skills, high efficiency

Salary: from 75,000 to 80,000 rubles per month

Applicant requirements:

Higher education. Having your own car is a must! Experience in the specialty for at least three years. Experience in a boiler room preferred. Working on a computer - an experienced user of AutoCad, Word, Excel; Ability to program in Siemens TIA Portal (Step7, WinCC) is desirable.

Salary: by agreement.

Applicant requirements:

When checking professional suitability, the candidate must demonstrate knowledge of: 1. APCS (confirm knowledge of the subject of methods and principles for constructing LTM and MPSA systems 2. Reading technical documentation sections OL, PZ, C 3. Knowledge of design documentation standards 4. Knowledge of manufacturers of controller equipment for APCS 5. Knowledge of equipment top level servers, industrial computers, L2, L3 switches, communication equipment 6. Knowledge of the main manufacturers in the software market for the implementation of SDKU oil and gas industry Higher education (strictly technical, IT, automation, electrical equipment design, TP technology) Work experience as an I&C engineer, APCS for at least two years Ability to work with a large amount of information Communication skills and the ability to quickly understand technical questions ability to multi-task, analytical thinking, logical thinking

Salary: from 60,000 to 70,000 rubles per month

Applicant requirements:

Experience in setting up information exchange with relay protection terminals (EKRA, Sirius) via RS485 Experience in setting up a telemechanics complex KOMPAS TM2.0 Experience in programming automated process control systems (data buses, data protocols, control system architectures, etc.) Experience in developing instructions for operational personnel for device maintenance Experience in developing programs for acceptance testing of devices Knowledge of GOSTs, SNiPs, PUE and other guidance materials

Salary: by agreement.

Applicant requirements:

Education: higher technical Similar work experience from 5 years

Salary: from 50,000 to 55,000 rubles. per month

Applicant requirements:

Knowledge of control schemes for central heating, hot water and cold water systems; experience in setting up and operating central heating automation systems; knowledge of organization principles commercial accounting in heat and water supply systems; experience in setting up and operating body meters of various manufacturers; skills in working with technical documentation, drawings, diagrams; skills in working with instrumentation; computer possession.

Salary: by agreement.

Applicant requirements:

Higher education (strictly technical, IT, automation, electrical equipment design, TP technology) Work experience as an engineer of instrumentation and automated control systems for at least 2 years High technical skills are required: work with design and technical documentation, the ability to quickly draw up technical and commercial documents Good communication skills, ability to quickly understand technical issues, ability to work with a large amount of information Systems approach in problem solving, active life position, the ability to work in a multitasking environment, analytical thinking, logical thinking The candidate must have knowledge of: APCS (confirm knowledge of the subject of the methods and principles of building LTM and MPSA systems) Reading technical documentation (sections OL, PZ, C) Knowledge of the standards for the design of PD instrumentation ( knowledge of the main manufacturers and their differences, physical measurement methods, types of signals, industrial interfaces and protocols) Knowledge of metrological requirements and instrument characteristics Experience in the oil and gas industry (knowledge of Excel, Word, Visio, preferably the ability to use Microsoft Project) Experience in collecting, calculating and analyzing financial and economic indicators for the preparation of a commercial offer Ability to communicate with vendors/suppliers in terms of obtaining a commercial offer Maintaining registers of requests and responses to the technical offer Maintaining a database of technical documentation, design, engineering, operational, permitting, regulatory Skills business correspondence with the customer and contractors

Salary: up to 80,000 rubles. per month

Applicant requirements:

2+ years of experience as an engineer Knowledge of the system project documentation and unified system standards of automated systems Proficiency in PC-based operating system Windows Willingness to travel (infrequent, short-term)

Salary: by agreement.

Applicant requirements:

Higher technical education; - Work experience as an I&C engineer, APCS from 1 year; - High technical skills are required: work with project and technical documentation, the ability to quickly draw up technical and commercial documents; - Communication skills, the ability to quickly delve into technical issues, the ability to work with a large amount of information; - A systematic approach to solving problems, an active life position, the ability to work in a multitasking environment, analytical thinking.

Salary: from 40,000 rubles. per month

Applicant requirements:

At least 3 years of work experience in the specialty; - acquaintance with the product line of manufacturers of modern automated control systems (Siemens, ABB, Mitsubishi); - versatile knowledge of the laws and principles in the field of mechanics, hydraulics and pneumatics, various systems technological equipment of production mechanisms, lines and systems.

Single qualification guide positions of managers, specialists and other employees (CEN), 2019
Section "Qualification characteristics of positions of employees of nuclear energy organizations"
The section is approved by the Order of the Ministry of Health and Social Development of the Russian Federation of December 10, 2009 N 977

Engineer for automated process control systems

Job responsibilities. Performs work on the design and implementation of automated control systems technological processes(APCS) based on the use of economic and mathematical methods, modern means of computer technology, communications and communication, elements of the theory of economic cybernetics. Prepares the necessary data and participates in the preparation of the terms of reference for the design of the process control system and its individual stages and subsystems, in the development of technical and working projects. Formulates the formulation of tasks, performs work on their algorithmization, identifies the possibilities of typing solutions for individual elements of the system, prepares proposals for the use of standard blocks in the design of process control systems and participates in their creation. Studying best practices in the design and operation of process control systems. Supervises work on the development of software and software, ensures the preparation of local programs for testing individual information paths of the process control system. Prepares acts and reports on the status of development and implementation of process control systems. Carries out work to improve the software methods of control of the APCS equipment. Issuing technical requirements for the choice of means of control and automation of technological processes. Oversees the acquisition, installation, debugging software tools information protection, the formation and change of information encryption keys, the development of tables of user access rights to information, the functioning of information protection software. Takes part in the development and implementation of information security software systems. Makes changes to the software aimed at improving the operation of protection systems and their reliability. Provides operation of information security software systems. Takes part in the analysis of the causes of failures in solving the problems of process control systems. Organizes the prompt elimination of failures and software defects by subordinate personnel. Controls the execution of plans and tasks by subordinate personnel. Prepares instructions for newly developed functional tasks in a timely manner.

Must know: laws and other regulatory legal acts of the Russian Federation, methodological and regulatory documents for the design and implementation of automated process control systems; local regulation and control systems based on microprocessor technology; operating systems and how to modify them; network software; operational requirements for software systems protection of information used in process control systems; operational requirements and characteristics of the functional software of process control systems; rules for the technical operation of consumer electrical installations; safety rules for the operation of electrical installations; rules for the installation of electrical installations; technical characteristics of the equipment used; basics of invention; fundamentals of economics, organization of production, labor and management; fundamentals of labor legislation; environmental regulations; rules on labor protection and fire safety; internal labor regulations.

Qualification requirements.

Engineer for automated process control systems of category I: higher professional (technical) education and work experience as an engineer for automated process control systems of category II for at least 3 years.

Engineer for automated process control systems Category II: higher professional (technical) education and work experience as an engineer for automated process control systems for at least 3 years.

Engineer for automated process control systems: higher professional (technical) education without presenting requirements for work experience or secondary professional (technical) education and work experience as a technician of category I for at least 3 years or in other positions filled by specialists with secondary professional ( technical) education, at least 5 years.

Beginning: 20000 ⃏ per month

Experienced: 40000 ⃏ per month

Professional: 56000 ⃏ per month

Demand for the profession

Many companies and many enterprises require qualified Process Automation Engineers.

Where to study as an APCS engineer in Moscow

Who is the profession for?

The profession associated with technology and mechanisms does not tolerate a familiar attitude to work. Responsibility and accuracy of all actions are important here. Even meticulous work, at times, requires stress resistance. Responsibility and attentiveness of a specialist will help him to avoid mistakes in his work.

Career

Process control automation engineer has three categories. This is determined by the presence higher education and work experience. An experienced qualified specialist will always be in demand in the labor market.

Duties

To improve the quality of products, to make the work of workers in production safe and highly productive, it is necessary to automate the process control systems. Before that, the engineer studies the range of necessary work and conducts research. Makes plans for automation and mechanization production processes, lifting and transport, loading and unloading and warehouse operations. Receives sketches and technical projects, drawings for consideration. Participates in installation work, adjustment and commissioning of automation and mechanization facilities. Supervises their maintenance and ensures that the work meets the criteria of reliability and quality. The engineer describes the results of the work done in the report.

I. General provisions

1. An engineer for automated production control systems belongs to the category of specialists.
2. For the position:
   • an engineer for automated production control systems is appointed a person who has a higher professional (engineering-economic or technical) education without presenting requirements for work experience or a secondary vocational (engineering-economic or technical) education and work experience as a technician of category I for at least 3 years or other positions filled by specialists with a secondary professional (engineering, economic or technical) education for at least 5 years.
   • engineer for automated production control systems of category II - a person who has a higher professional (engineering-economic or technical) education and work experience as an engineer for automated production control systems or other engineering and technical positions occupied by specialists with a higher professional (engineering-economic or technical) education, at least 3 years;
   • engineer for automated production control systems of category I - a person who has a higher professional (engineering, economic or technical) education and work experience as an engineer for automated production control systems of category II for at least 3 years.
3. Appointment to the position of engineer for automated production control systems and dismissal from it is carried out by order of the director of the enterprise on the proposal of the head of the department of automated production control systems.
4. An engineer for automated production control systems should know:
   1. 4.1. Decrees, orders, orders, methodological and regulatory materials on the organization of automated production control systems.
   2. 4.2. Prospects for the development of the enterprise.
   3. 4.3. Organization of economic planning and operational regulation of production.
   4. 4.4. The structure of the enterprise, production and functional relations between its divisions.
   5. 4.5. Tasks and content of the automated control system.
   6. 4.6. The procedure for the development of projects for automated control systems and its subsystems, terms of reference, technical and working projects.
   7. 4.7. Economic and mathematical methods.
   8. 4.8. Fundamentals of the theory of economic cybernetics.
   9. 4.9. Means of computer technology, communications and communications.
   10. 4.10. The order of setting tasks, their algorithmization.
   11. 4.11. Methods for determining the economic efficiency of the introduction of automated control systems.
   12. 4.12. Standards of the unified system of organizational and administrative documentation.
   13. 4.13. The procedure for the development and execution of technical documentation.
   14. 4.14. Fundamentals of economics, organization of production, labor and management.
   15. 4.15. Fundamentals of labor legislation.
   16. 4.16. Rules and norms of labor protection.
5. The engineer for automated production control systems reports directly to the head of the department for automation and mechanization of production processes.
6. During the absence of an engineer for automated production control systems (vacation, illness, etc.), his duties are performed by a person appointed in the prescribed manner. This person acquires the appropriate rights and is responsible for the proper performance of the duties assigned to him.

II. Job Responsibilities

Engineer for automated production control systems:

1. Performs work on the design and implementation of automated production control systems (APCS) based on the use of a combination of economic and mathematical methods, modern means computer technology, communications and communications, elements of the theory of economic cybernetics.
2. It studies the system and methods of managing and regulating the activities of the enterprise, its production and functional divisions, determines the possibility of formalizing the elements of the current system and the feasibility of transferring the relevant processes to an automated mode.
3. Carries out the preparation of the necessary data and participates in the preparation of the terms of reference for the design of the automated control system and its individual stages and subsystems, in the development of technical and working projects.
4. Formulates the formulation of tasks, performs work on their algorithmization, identifies the possibilities of typing solutions for individual elements of the system, prepares proposals for the use of standard blocks in the design of automated control systems and participates in their creation.
5. It studies the automated production control systems developed by design organizations and operating at other enterprises in order to use the best practices in the design and operation of automated control systems.
6. Takes part in the work to improve the workflow at the enterprise, formulates requirements for the content and construction of technical and organizational and administrative documentation used in the automated production control system.
7. Develops technological schemes for processing information on the established tasks of the automated control system, taking into account the organizational and technical support for all subsystems.
8. Prepares draft methodological materials, instructions and other technical documentation related to the creation and use of funds for the information use of the automated control system.
9. Participates in the work on debugging, trial operation and phased introduction of a complex of technical means of automated control systems.
10. Carries out architectural supervision and periodic control of incoming and outgoing documentation.
11. It studies the causes of failures and violations in the system, develops proposals for their elimination and prevention, for improving the quality and reliability of the automated control system.
12. Provides methodological assistance to the divisions of the enterprise in preparing data for the automated control system, in preparing the necessary documents and decoding information processed by computer technology.

III. Rights

An engineer for automated production control systems has the right to:

1. Get acquainted with the draft decisions of the management of the enterprise relating to its activities.
2. Submit proposals for the management to improve the work related to the duties provided for in this job description.
3. Notify the immediate supervisor of any deficiencies identified in the course of the performance of their duties in production activities enterprises (his structural divisions) and make suggestions for their elimination.
4. Request personally or on behalf of the immediate supervisor from the heads of departments of the enterprise and specialists information and documents necessary for the performance of his duties.
5. Involve specialists from all (individual) structural divisions in solving the tasks assigned to him (if this is provided for by the regulations on structural divisions, if not, then with the permission of the management).
6. Require the management of the enterprise to assist in the performance of his duties and rights.

IV. A responsibility

The Production Control Systems Engineer is responsible for:

1. For improper performance or non-performance of their official duties provided for by this job description - to the extent determined by the current labor legislation of the Russian Federation.
2. For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
3. For causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.