How to make liquid cream soap. How to make liquid soap at home with your own hands

Today, on the shelves of cosmetics stores and pharmacies, you can find a wide variety of cosmetic products that are designed to different type skin and have their own characteristics and characteristics. However, such a large selection does not at all indicate the high quality of cosmetics. Many people prefer to make their own soap. This allows you to choose only natural ingredients High Quality and also take into account the type of skin. How to make liquid soap? – The answer to this question can be found in this article. It is important to follow the advice of professional soap makers.

Sometimes, the use of hard soap leads to dissatisfaction and irritation. Very often, such soap becomes limp in the soap dish, falls apart into pieces and eventually has an unpleasant texture. Liquid soap has become quite popular, as it is convenient to use by pouring it into a jar with a dispenser.

You can make your own liquid soap. The easiest way is to use baby soap.

Soap can be given any properties by adding essential oils and various useful fillers to its composition. Soap can be moisturizing, softening, bactericidal or nourishing. It is important not to overdo it with the number of components. For example, when mixing fragrances and essential oils, care must be taken, as some combinations can spoil the aromatic properties of the soap.

How to make liquid soap:

• Boil herbal decoction of chamomile, mint or lemon balm. It will give the soap soothing properties to the skin. The broth should be prepared exclusively in a water bath - only then the herbs will transfer their beneficial properties.
• The finished broth is diluted with boiled water. The result should be 8 glasses of solution.
• Grate baby soap (preferably unscented) on a fine grater. It is important to remember that the thinner and smaller the sawdust, the more uniform the composition will be. Enough glass of soap shavings.
• Soap shavings are added to the herbal decoction and put on fire. It must be slow. While the soap is melting, it should be thoroughly mixed. The composition may seem liquid, but after supplementing it with other components, it will thicken within a few hours.
• A large spoonful of glycerin is added to the cooled composition and mixed well.
• Essential oil is added to liquid soap. Before this, an allergy test should be performed.

Dyes can be added to the composition of the soap if desired. They can be edible or natural. As dyes, you can use milk, coffee, decoctions of herbs, juices.

How to make liquid soap at home

To make a liquid consistency soap, you can use a soap base, a piece of baby soap and a pile of old remnants. Such preparation will not take much time and will be very economical. In addition, it can be given specific properties that will positively affect the condition of the skin.

In pharmacies and cosmetics stores, you can often find liquid soap for personal hygiene. You can make your own soap at home.

In order for the soap to take care of the skin, olive oil and distilled water can be used to make it. Liquid soap is stored in a container with a dispenser. There are a large number of simple dispenser bottles and creative, original bottles on the market today.

Soap making process:

• Grate remnants or soap on a fine grater. Fill with hot water.
• For every part of grated soap, there are three parts of water or herbal decoction.
• Chips and water must be kept on low heat, stirring constantly.
• After removing the heat, add a large spoonful of olive oil to the soap.
• After the mixture has cooled, you can add a couple of drops of essential oil to it.

This soap will perfectly moisturize the skin and protect it from the influence of cold water and wind. This is an economical option that allows you to get more liquid from one bar of soap. So that the soap has a beautiful color, natural or artificial dyes can be added to its composition.

Cooking liquid dish soap

Today, manufacturers offer a large number of dishwashing detergents. But most of them contain dangerous chemicals that, if not washed thoroughly with water, can be harmful to health. To be sure of the quality of the dishwashing liquid, you need to prepare the composition yourself.

Dishwashing soap does not contain harmful ingredients and perfectly fights dirt even when using water at low temperatures.

To make soap, you need to purchase borax, baking soda, baby soap, clean water, distilled vinegar. You need to prepare the mixture in the kitchen. For cooking, use special utensils.

Cooking process:

• Pour clean water into a 250 ml glass.
• Add two large spoons of vinegar to the water.
• Heat water with vinegar over low heat, wait until it boils.
• Pour a glass of borax and a glass of baking soda into the liquid.
• Mix everything.
• Add half a cup of crushed baby soap.

The composition is thoroughly mixed until it becomes homogeneous. After cooling, add a few drops of lemon oil to it. Store the product in a glass jar with a lid.

We make liquid soap from remnants

Very often people do not like to throw away remnants, but I don’t know what to do with them. A useful tip is to prepare liquid soap, which will allow you to make soap by adding additional useful components to it. Soap made by yourself will definitely be environmentally friendly and harmless.

Those who have tried making soap on their own no longer use store-bought soap and don't spend money on buying it.

If you have a blender at home, cooking will be very quick and easy. In order to cook useful soap, it is necessary to collect soap chips, prepare glycerin, honey, essential oil. To make soap, it is better to use purified soft water.

Cooking process:

• Rub the remnants (200 gr). They should be as small as possible.
• Pour the remnants with a glass of boiling water.
• The composition must be whipped with the slop of a hand blender.
• Enrich the composition with a spoonful of glycerin, a few drops of essential oil and a spoonful of honey (if you are not allergic to it).
• After a quarter of an hour, beat the composition again.

It is good to store such a composition in a special container with a dispenser. Instead of honey, you can add a variety of ingredients to soap. It can be various decoctions of herbs, milk, vegetable oils, cocoa, fruit juices. It is important to consider the needs and condition of the skin. Soap can be made nourishing, moisturizing, cleansing, disinfecting, soothing. When cooking, it is important to be careful and follow safety precautions. If the child drank soap, he should be given plenty of water to drink and consult a pediatrician.

Instructions: how to make liquid soap (video)

Liquid soap is very pleasant to use. Unlike solid soap, it does not get wet, does not break into pieces, does not leave remnants. But you can cook it using just baby soap and soap remnants as the basis. Making your own soap is very easy. It is important to correctly calculate the proportions and choose fillers that will improve the properties of soap. Such soap is much more economical than buying solid soap. And self-preparation leaves no doubt about the quality and safety of soap for health.

Choose the bar of soap you will use. Liquid soap can be made from any bar of soap you find around your home. You can use leftover soap or half-used bars, or think about what ingredients to choose to make liquid soap with some special properties. For example:

• Use a bar of facial soap to make liquid soap that you can wash your face with.
• Use a bar of antibacterial soap to make a good cleansing soap that can be used in the kitchen or after using the toilet.
• Use a bar of moisturizing soap to make liquid soap that you can use as a shower gel.
• If you want to make a unique liquid soap with your own scent, choose an unscented bar of soap.

Rub the soap into a bowl. Use a fine cheese grater and grate the entire block into a bowl. To do this, take the smallest grater that you can find in the house - when you get to the stage of melting the soap, the process will go faster. You can cut the soap into pieces if that makes it easier for you to rub it.

• As a result, you should get a glass of soap flakes (229 g). If you have less, grate another bar.
• This recipe can easily be doubled or tripled if you want to make a lot of liquid soap. It will be a great gift, especially if you pour soap into pretty jars.

It would seem that the need to make soap at home has disappeared thanks to the huge selection of this cosmetic product in stores. But soap making is gaining more and more popularity. Soap makers show off their own masterpieces to one another, invent new recipes, conduct master classes, and even earn good money from their hobby. There are also special departments and shops for soap making, which once again proves the growing need for soap making. Is it easy to make soap with your own hands?

Why is homemade soap better than store bought?

Soap sold in conventional stores household chemicals and supermarkets, does not contain natural ingredients. In fact, it is difficult to call it soap, since soap is saponified vegetable fats, and not processed petroleum products. A store-bought product often dries the skin and can cause allergic reactions.

When making at home, you can use only natural ingredients that are suitable for your skin type. And if now it's just a hobby, then later it can become a profitable business.

Soap handmade can be of different colors, with beautiful streaks and patches of scrubbing elements

What ingredients are used

You can make soap from scratch, or from a ready-made purchased base. As the latter, you can also use natural, fragrance-free baby soap. And for the thrifty, there are ways to digest remnants and turn "waste" into fragrant soap.

It is much easier to work with a ready-made base. It is transparent and white. Also commercially available are organic bases for making natural soaps. You can buy them at soap shops. Working with the base is not difficult, but some skills will still be required. As for making soap from scratch, in this case you will also need knowledge in the field of chemistry, since you will have to work with alkali. Before you start making soap, be sure to familiarize yourself with the safety precautions when working with alkali.

The amount of ingredients will depend on how the soap is made and the recipe. Consider the list of necessary components for each case.

Soap base ingredients

All the main ingredients can be bought in a specialized store, and additional ones in a regular supermarket. Some are sure to be in your home. You will need:

• finished base;
• base vegetable oils;
• dyes;
• flavors;
• essential oils;
• herbs, petals, honey, ground coffee - optional;
• medical alcohol.

Bases from different manufacturers differ in price, hardness, hardening speed and other characteristics. There are organic bases that are used to make all-natural soaps.

A transparent soap is made from a transparent base.

Base oils are used to enrich the soap, they give it such beneficial properties as moisturizing, nourishing and softening. Without them, the product dries the skin, and also quickly “dries out”, cracks and exfoliates. For the same purpose, you can add body cream or milk, cream or pasteurized milk.

Important! Do not overdo it with moisturizers and oils. If you decide to add full fat milk, reduce the amount. Soaps that are oversaturated with fats don't lather well.

Dyes come in liquid and dry form. It is most convenient to use liquid ones, since it is very easy to measure the right number of drops. Dry dyes are pre-mixed with oils or liquids and only then introduced into the finished mass. Try not to overdo it with dyes, because because of this, the lather will also be colored when lathering. To get started, it will be enough to purchase three basic colors: red, yellow and blue. By mixing them, you can achieve almost any shade.

In addition to purchased artificial dyes, natural dyes can also be used. These can be spices (turmeric, curry), the same base oils (sea buckthorn, pumpkin), different fillers (colored clays, ground coffee, cocoa, strong herbal decoctions). Of course, with their help it will not be possible to achieve bright, saturated colors, but the soap will be as environmentally friendly and natural as possible.

For decoration, you can also use mother-of-pearl pigments, sparkles and various decors.

With the help of special dyes, you can give the soap any shade

Fragrances are responsible for the beautiful aroma. You can use confectionery fragrances, or you can look for special flavors for home cosmetics. Instead of artificial fragrances, essential oils, honey, chocolate, coffee, dried zest, herbs, flowers and petals are used. The disadvantage of essential oils is that they fade faster. They are usually added at the very end.

Alcohol is also used in soap making. It eliminates air bubbles from the surface of the soap and connects the layers in a multilayer colored soap. To do this, alcohol is poured into a fine spray and sprayed onto the surface of the product.

AT homemade soap you can add a decoction of medicinal herbs, dried chamomile flowers and natural essential oils

In order for soap to acquire such properties as scrubbing, anti-cellulite effect, smoothing wrinkles, etc., various fillers are added to it. These are ground coffee, nutshell powder, clay, oatmeal, crushed sea salt and much more. All these are additional caring elements that will give the soap the desired useful properties.

Do not use fresh fruits, berries, cucumbers, ginger root and similar ingredients. They will rot and quickly render your enriched soap unusable. Instead, use dry herbs and leaves, petals and small dried flowers, ginger powder, dried fruits.

Tools and devices

You will also need:

• saucepan enameled or of stainless steel;
• any other saucepan for a water bath;
• plastic or glass microwave container;
• the spoon;
• whisk;
• measuring cup;
• kitchen electronic scales;
• spray for alcohol;
• soap molds.

Forms can be bought in the same specialized stores or you can use confectionery silicone molds. Also suitable are children's plastic molds for playing with sand, containers for yogurt or sour cream, and other small containers made of flexible plastic. Purchased molds are made of plastic or silicone. For beginners, it is best to use the latter, since they are the easiest to get ready-made soap from.

Soap molds are available in plastic and silicone.

As for dishes, you can not use aluminum pans, cast iron dishes. For these purposes, stainless steel containers with enamel coating, as well as heat-resistant glass and plastic containers for use in a microwave oven, are suitable. For the exact amount of ingredients, you will need a measuring cup and scales.

What ingredients are used to make soap from scratch?

The soap base is prepared independently, using only three components:

• alkali;
• oils for saponification;
• liquid - distilled water, herbal decoction, milk.

For the manufacture of hard soap you need caustic soda (NaOH). It is sold in the form of flakes or small crystals. Alkali is needed for saponification of fats, namely base oils.

Caustic soda is also called caustic soda.

In the preparation of soap from scratch, the so-called overfat is of great importance. Since fats cease to be useful after reacting with alkali, it is recommended to add more oils at the end of cooking. This will be overkill. As a rule, valuable and expensive oils are used for it.

Vegetable oils use any. Rarely add pork fat. The liquid is needed in order to pre-dissolve the alkali and prepare it for combination with fats. Using decoctions of medicinal herbs, you will give the soap useful properties, as well as a natural aroma and shade.

To improve the soap, its coloring and aromatization, the following components are used:

• plasticizers - sugar, sorbitol, fructose, honey;
• acids - lactic, succinic, stearic, citric;
• lanolin;
• glycerol;
• oils for enrichment (overfat);
• dyes;
• flavors;
• various useful supplements.

Dyes, flavors and fillers use the same ones. Plasticizers are needed in order to make soap more plastic, as well as improve foaming. The acids will harden the soap and give it bactericidal properties. Lanolin will have a softening effect on too dry and rough skin.

With the help of different base oils, you can give soap caring, beneficial properties.

Auxiliary tools

You will need:

• two pans (one can be made of heat-resistant glass);
• hand blender;
• measuring cup;
• a glass stirring rod or a regular spoon;
• container for working with alkali;
• forms.

Important! Tools that were used to make soap should never be used for cooking!

When working with alkali, great attention is paid to safety measures.

Ingredients for different types of soap: for face, hands and body

For making soap different qualities you need the appropriate components. Some of them have emollient properties, others are moisturizing and nourishing, and others are bactericidal and drying. It is worth noting that it is better to use the appropriate soap for each part of the body. Washing your face with body or hand soap is not recommended. Also, not all components are suitable for every skin type.

Table: Recommended Soap Ingredients Based on Use

For aging skin, geranium oil is recommended because it helps to smooth out wrinkles. Mint will save you from dryness, and juniper will saturate the skin with useful substances. For rough, overdried skin, it is recommended to use lanolin. Orange oil, algae, loofah and ground coffee have an anti-cellulite effect and make the skin supple.

Essential oils give a beautiful aroma, and also “enrich” the soap with useful properties.

Making solid soap at home

First, the base is melted in a water bath or in a microwave oven. With the first method, the base melts longer, but a uniformly melted mass is obtained. In addition, you will be able to independently control the entire melting process. When heated in an oven, there is a risk of the base boiling. Therefore, set the power to the very minimum and heat for 1 minute, checking the condition of the base every 5-10 seconds.

Soap base

Having prepared all the necessary ingredients and appliances, do the following:

1. Cut the base into small cubes and place in a suitable container.
   

   The cut soap base is put into a glass container.

2. Melt in the microwave.
3. Add all fillers to the melted mass.
   

   This is what the melted base looks like after adding oils

4. Mix well.
5. Fill molds with soap.
6. Eliminate air bubbles by spraying with alcohol.
7. Leave the soap to dry for 24 hours.
   

   Soap should be in the molds until completely solidified.

8. Take the soap out of the molds after one day.
9. Wrap in foil or use immediately.

   Such a beautiful soap can be obtained from the finished base, oils and pigments

This is the standard algorithm of actions. The amount of ingredients and fillers mainly depend on the recipe.

• base oils - 1/3 tsp;
• essential oils - 3-7 drops;
• flavor - 3-4 drops;
• liquid dye - 1–7 drops;
• dry pigment - 1/3 tsp.

Other additives (herbs, clay, scrub components) can be added at will, as well as in accordance with the recipe.

Important! Esters are added at the very end to a warm, but not hot, “soapy” mass. They are quite volatile, evaporate quickly, and their properties are lost.

Video: How to make soap from a finished soap base

Cold and hot manufacturing from scratch

This is the real soap making. You can only prepare the base and use it in the future as a ready-made purchase.

Soap making from scratch is not the safest activity. You have to work with alkali, and, as you know, it is capable of leaving burns on the body. So great attention it is given to means of protection and familiarization with the properties of alkali, its reaction with water, as well as with the chemical reactions that occur during the saponification of fats and their transformation into the same soap.

Alkali, reacting with water, emits a pungent odor and is very harmful to the mucous membranes. Contact with alkali on the skin causes severe burns, so be extremely careful when working with this substance.

Safety rules for working with alkali

• Be sure to use protective equipment: goggles, a respirator, rubber gloves.
• Clothing and shoes should be as closed as possible.
• Utensils and tools that are used for making soap are not used for cooking.
• It is best to work with lye outdoors. If this is not possible, open the windows and turn on the hood.
• Food should not be prepared in the kitchen. Children and animals should also not be present.
• Reacting with water, the alkali heats up very much, as a violent reaction occurs. Make sure that the water is as chilled as possible, and preferably with ice cubes.
• The container should be glass, ideally a special container for working with alkali.

This is the minimum list of requirements to keep you safe while making your soap base. Next follow general rules making soap from scratch.

Another important point. An alkaline solution is poured into liquid oils and not vice versa! You also need to strain the solution to avoid getting whole soda crystals.

To make sure that the oils and lye have fully worked and that the soap is absolutely safe for the skin, we recommend using special indicator strips (litmus papers). Just dip the tip of the strip into the soap and wait for the reaction. Next, compare the color of the paper with the color chart on the package. The darker the shade, the higher the pH level. Soap with a pH level above 10 is considered immature and not ready for use.

For the preparation of the base is already used ready recipes or develop their own using a special soap calculator. The latter can be found on the Internet at many soap making sites. The trick is that you have to calculate the amount of oils and alkalis for the correct ratio. It is difficult for beginners to do this, so we recommend using ready-made recipes from the Internet.

This is how an online calculator for calculating the amount of ingredients for soap looks like

Soap base is prepared in two ways:

• Cold way. More simple, but it takes a long time for the "ripening" of soap.
• Hot way. More difficult at first, but the soap is ready for use within a day.

Let's consider each of them.

cold way

1. Measure the correct amount of alkali.
2. Pour ice water into a special container.
3. Slowly pour the lye into the water and stir immediately.

   Alkali is added to the liquid gradually, gently stirring

4. While the mixture is cooling, proceed to the oils.
5. Melt solid oils in a water bath or in a microwave.

   Solid oils are heated in a water bath until they are completely melted.

6. Blend all oils until smooth.
7. Measure the temperature of the alkali and oils - one should be approximately the same and be 37-38 ° C (use an electronic thermometer).
8. Add the alkaline solution to the oils while straining it through a strainer.
9. Stir gently.
10. Turn on the blender and start whipping the mixture of oils and lye. Alternate beating and stirring in the off mode.

    The oils are whipped with an alkali solution using a hand blender.

11. When the mixture becomes viscous, you can start adding various benefits, colors and flavors.
12. At this stage, fat, essential oils, and other natural ingredients are added.

    When the soap base becomes viscous, you can start adding various fillers and utilities.

13. Pour the finished mixture into molds and leave to harden.
14. Remove soap after 24 hours and remove from mold.
15. Wrap in cling film and leave to ripen for at least 4 weeks.

A long maturation stage is needed in order for the soap to pass from the “trace” stage to the “gel” stage. If to speak in simple words, then during this time it will become what it should be.

Video: Soap "from scratch" in a cold way

At the “trace” stage, when the mass begins to thicken, you can stop and leave everything as it is. The frozen mass will be the soap base, which can then be melted and made into fragrant homemade soap.

hot way

Up to the “trace” stage, soap is prepared in the same way as with the cold method. The most interesting begins later.

So, the viscous base is ready. Let's move on to the next step:

1. We put the container with the soap mass in a water bath. The water level in the pot should reach the level of the mass in the container.
2. Cook over low heat for 3-4 hours covered.

   The soap base is cooked under a closed lid over low heat.

3. We monitor the water level in the pan and stir every 30 minutes.
4. The mass should become gel-like and not stick to the fingers.
5. When the base is ready, you can safely proceed to its "filling".

   A litmus test (pH indicator) will help determine the alkalinity of the finished soap base.

6. We add the overfat in the same way, at the very end.
7. Soap is poured into molds and allowed to thicken completely during the day.
8. Your homemade, natural soap is ready to use.

Video: Hot soap from scratch

As you can see, the hot method is much more complicated, but it has the advantage that soap can be used almost immediately after it is made.

Soap Recipes

Exist great amount cooking recipes different types soaps, differing in their purpose, properties, fillers and appearance. Let's consider several recipes using the base, but if desired, they can also be used in the manufacture of soap from scratch.

baby

• organic base - 250 g;
• carrot juice - 1/2 tsp;
• a decoction of string and chamomile - 1 tsp;
• almond oil - 8 drops;
• tangerine oil - 1-2 drops;
• funny baby molds made of silicone in the form of animals.

It's very simple: melt the base, mix with the rest of the ingredients, pour into molds and leave for 24 hours to harden the soap.

These cute teddy bears can be made from a soap base and other ingredients.

Tar

• transparent base - 100 g;
• calendula oil extract - 1/3 tsp;
• birch tar - 1.5 tsp (sold in a pharmacy);
• mint essential oil - 6-8 drops.

In a melted and slightly cooled base, add the ingredients in the following sequence: oil extract, tar and finally essential oil. Mix everything thoroughly and pour into molds.

Birch tar has antiseptic and antifungal properties, so this soap will be useful for problem skin.

This is how it will look tar soap from an opaque natural base

Two-layer colored soap with honey

With this recipe, you can make beautiful decorative soap from layers of different colors.

First layer:

• transparent base - 50 g;
• yellow food coloring - 3 drops;
• flavor "Honey" - 10 drops;
• natural honey - 1 tsp;
• grape seed oil - 1/3 tsp

Second layer:

• white base - 100 g;
• avocado oil - 1/2 tsp;
• pasteurized milk - 2 tsp;
• pearlescent pigment - 1/2 tsp;
• honeycomb shape.

First, prepare the first layer of a transparent base, pour it into a mold and sprinkle with alcohol. When the layer has cooled, sprinkle it again with alcohol and cover the prepared white base.

This yellow-white soap has a unique aroma of honey.

The use of remnants

Agree, sometimes it is a pity to throw away the remnants of soap or the so-called remnants. We offer a simple way to "resuscitate" remnants and make soap from them, which in the end can even surpass its "original source". From the "soap" residues, you can make both solid and liquid soap.

In addition to remnants, you will need the following ingredients and tools:

• remnants - 200 g;
• water - 5 tbsp. l.;
• glycerin - 2 tbsp. l.;
• alcohol tincture of calendula - 2 tbsp. l.;
• essential oils and fragrances for fragrance - optional;
• grater for rubbing remnants;
• containers for a water bath;
• the spoon;
• forms.

Remnants can be used in a variety of ways, except, of course, for the remains of laundry soap for washing and various stain removers. Fillers and fragrances can take any. With their help, you "enrich" the soap, give it new useful properties and flavors.

Glycerin is needed to obtain a more viscous consistency, it helps the components dissolve faster and retains the desired moisture. Instead of alcohol tincture of calendula, you can use medical alcohol.

The remnants will need to be melted in a water bath. Thus, the contents will be evenly heated and melted to the desired consistency.

So, having prepared all the necessary ingredients and tools, get to work:

1. Set a pot of water to heat for a water bath. Reduce heat when water boils.
2. Rub the remnants on a grater.

   To make soap, you must first grate the remnants on a coarse grater.

3. Transfer the chips to a suitable container.
4. Pour in water, glycerin and calendula tincture.
5. Mix everything and let it heat up.
6. Stir the soap and make sure it doesn't boil.
7. Remove the pot from the heat when most of the leftovers are completely melted.
8. Let the mass cool down a bit.
9. Add your desired fillers.
10. Fill in the forms with the finished mass.
11. Leave the soap to harden in a cool place for a day.
12. Take the soap out of the mold and let it dry for another two days.
13. The finished product is stored wrapped in cling film or used immediately.

    So-called "marble" soap can be prepared from unevenly melted colored pieces.

In the same way, soap can be made from the remains of a soap base and baby soap.

Video: How to make solid soap from remnants

How to make liquid soap

To prepare liquid soap from scratch, another type of alkali is used, namely KOH (potassium hydroxide). This type of soap is also called potassium soap. Liquid soap can be made from the same remnants, from baby soap, from the remnants of a soap base, or from any solid soap. Consider the cooking process.

From remnants

To prepare 1 liter of liquid soap you will need:

• remnants - 50 g;
• distilled water - 1 l;
• tincture of calendula or medical alcohol - 2 tbsp. l.;
• essential oil - 3 drops;
• liquid food dye - 3 drops;
• glycerin - 4 tbsp. l.

Put a pot of water on the fire and do the following:

Video: how to make liquid soap from remnants

Liquid laundry soap

It is used for washing clothes and washing dishes. You will need one bar of laundry soap (200 g), 1 liter of water, essential oils and fragrances - optional. How to cook:

1. Rub the soap on a grater - the finer the chips, the faster it will dissolve.
2. Pour the shavings into a stainless steel saucepan and add water.
3. Mix the ingredients and cook over low heat until the chips are completely dissolved.
4. At the end, strain the mass through a sieve and cool slightly.
5. Add about 20 drops of essential oil or fragrance.
6. Pour the finished liquid soap into a plastic bottle.
7. Concentrated washing gel is ready.

The finished product is stored in a closed container.

Photo gallery: beautiful handmade soap

Loofah soap has a scrubbing and anti-cellulite effect on the skin Soap brewed with a decoction of herbs is always a pleasure to use. Coniferous soap has extraordinary healing properties and a beautiful aroma. Soap in the form of a jelly dessert looks very appetizing This soap is almost indistinguishable from a natural mineral This soap not only looks beautiful, but also smells delicious. The main thing is not to confuse such soap with a real cake! Natural soap without artificial dyes and additives the most beneficial for the skin Soap in the form of a snowflake will be a great gift for the New Year Homemade colored soap various additives will decorate the bathroom Handmade soap can have a wide variety of shapes and colors.

My name is Olya, I am 29 years old. I like to write articles, make artistic product descriptions for websites. The following topics are in priority: jewelry, clothing, interior items, cooking, as well as helpful tips(life). It is very important for me that readers, customers and, of course, myself like my texts!

DIY liquid soap easy enough to cook. Having prepared soap for yourself, you will be 100% sure that it is natural, contains a minimum amount of harmful substances, and most importantly, will delight you with your favorite aromas. Having prepared liquid soap with your own hands, you can choose the consistency and fat content of the soap that is suitable for your skin. Do-it-yourself liquid soap can also be used as a shower gel. The recipe for liquid soap, which I want to describe to you, is quite simple and anyone can make it from improvised means. No need to search or order the ingredients you need to make soap from scratch. The basis of my liquid soap will be ordinary baby soap, which contains a minimum amount of artificial additives and dyes.

Liquid soap is much more convenient and economical than regular soap. There are no soapy residue left at the end of use. Moreover, with liquid soap, you can forget about damp soap.

Handmade soap is much healthier than store bought soap. Since you won't be adding artificial flavors or colors to the soap you're making for yourself, you can use natural ingredients instead. You can always choose the ingredients that are suitable for your skin type, as well as use your favorite fragrances.

Ingredients

DIY liquid soap ingredients:

- a bar of soap (I used baby soap);

- 1 tsp glycerin (sold in a pharmacy, costs a penny);

- essential oils of your choice;

Optional additives:

- a decoction of herbs;

- olive or other oil;

- food colorings.

Making liquid soap with your own hands at home:

1. Rub half a bar of soap on a grater.

2. Pour the resulting flakes with 2 cups of boiling water (I used a decoction of chamomile).

3. Beat the resulting mixture until the soap flakes are completely dissolved.

4. Wait for the mixture to cool, then add 1 tsp. glycerin (glycerin moisturizes the skin).

5. Add 3-5 drops of your favorite essential oil (I used lemon oil).

6. Add 1 tsp. honey (Optional, but honey softens the skin).

7. Add 5 cups of cold water and mix well.

8. Pour the finished mixture into the dispenser.

Liquid soap is ready.

To prepare liquid, instead of water, you can use decoctions of herbs, I used a decoction of chamomile (I bought it in a pharmacy for about 20 rubles). Chamomile is suitable for problem skin. Other herbs can also be used for the decoction. Also, for making liquid soap with your own hands, you can use any essential oils, choosing them both for smell and for usefulness. Whether or not to add oils to liquid soap, you can choose on your own, it all depends on your skin type, I did not use additional oils, since I have combination skin.

You can add a little ground coffee to the finished liquid soap, so you get a handmade soap made from natural ingredients.
P.S. Don't forget to subscribe for new articles.

Anecdote for humor lovers 🙂

“Hello, hello, is this Alexei?”

- Hello. He is not at home now. What shall I tell to him?

Do you prefer liquid soap to bar soap? Soap made from natural ingredients is not cheap, but you don’t want to buy frank chemistry at all. But you can make liquid soap with your own hands from the simplest ingredients, and it will be with the flavor that you love.

From this article, you can learn how you can make liquid soap with your own hands, using ordinary bar soap or purchasing all the necessary ingredients.

How to make liquid from bar soap?

You will need:

• 2 bars of soap (2 pieces of 120 grams - 240 grams);
• Grater;
• Water at room temperature or slightly warm (about 230-240 grams);
• Submersible blender;
• Glycerol;
• Containers for liquid soap.
• Essential oil, food coloring.

If you plan to make a lot of soap at once, then you should not limit yourself to one piece: buy several at once and cook a lot. Part of the soap can be poured into dispensers and used, and the rest can be poured into plastic or glass dishes, sealed and put away in a dry place.

As an option - do the same thing right on the stove. It is not very convenient to use a blender here, you will have to stir the contents until the soap is completely dissolved in water.

And if the house has a microwave, you can use it: pour approximately the same amount of soap chips in a glass or other suitable container with hot water and put it in the microwave. If it is not possible to melt the soap in 30 seconds, you should reheat the container until the soap is completely dissolved and a homogeneous mass is formed. But this option is applicable only in the case of a small amount of soap being prepared (large containers do not fit in the microwave, you will have to do everything in several stages).

If you originally wanted to make soap with a fragrance that you love, then you should purchase soap without a strong scent. Now you can add a few drops of your favorite essential oil to the soap solution - you will enjoy the aroma that you really like several times a day.

Want extra hydration? Add some honey or lotion to your soap.

Are you afraid of bacteria that children bring from the street? Lavender, cedar oil, etc. has unique antibacterial properties. Why not use it in your soap?

Store-bought food coloring can color your soap solution any color you like. But it is important to buy exactly food coloring - they are all natural and will not harm you.

Liquid soap of own production This soap is made from 100% natural ingredients. But here care and accuracy are needed: you will definitely need scales, because we must carefully weigh the ingredients for soap.

Important: if you add more or less of one or another ingredient, it may not work.

So, for 5.5 liters of liquid soap we need:

Important: pay attention to the fact that we pour potassium into the water! Otherwise, a bright chemical reaction so be careful.

1. You can pour the soap solution into containers, add dyes and different oils to each individual container. As a result, you will get several types of soap: the colors and ingredients will be different, therefore, you can use them with different purpose: soap with antiseptic oils - for washing hands, with moisturizing ingredients - for washing the face and body. A real flight of desire and fantasy!
2. It is great to use handmade liquid soap as a gift. AT big stores (« Leroy Merlin”, “Obi”, “IKEA”, etc.) you can find cute jars with and without dispensers. If they are filled with soap, packaged beautifully, it will be a wonderful surprise for relatives and friends.

So, we have analyzed several ways at once how to make soap. Now you can create the soap that is right for you. Dare and surprise your family and beloved friends.