home » Terms » How to paint a polar fox collar at home. How easy is it to dye the fur of a polar fox, mink, silver fox, fox at home? Fur paint

How to paint a polar fox collar at home. How easy is it to dye the fur of a polar fox, mink, silver fox, fox at home? Fur paint

Unfortunately, even the most expensive products from natural fur over time, they lose their original attractiveness due to common wear and tear. Nevertheless, it is still possible to return them to their former attractiveness. And, by the way, for this it is absolutely not necessary to go to specialized dry cleaners and workshops. In this article, we will consider everything about how to dye fur at home, what features this process conceals, as well as the nuances, subtleties and features of work to restore the lost color and shade on various furs.

It should be noted right away that despite the apparent lightness and simplicity, the staining process requires maximum concentration of attention, because even the slightest mistake can make a thing completely unusable. Moreover, before dyeing yellowed fur at home, you should attend to the preliminary preparation of the product, cleaning it from dirt and dust, as well as carrying out a simple degreasing procedure. Ignoring this requirement can lead to the fact that the paint is not evenly distributed and is not absorbed into the structure of the product, as a result of which various stains and unpleasant streaks will remain on its surface.

For processing fur things use alkali solution, which includes:

Dishwashing detergent or washing powder - 1 tsp;
Ammonia - 5 grams;
Table salt - 15 grams;
Soda - 10 g.

This amount will be enough to prepare 1 liter of cleaning solution. The resulting liquid is applied to the fur area using an ordinary brush, after which it is washed off with warm running water. As an alternative to this recipe, you can use a mixture of alcohol, vinegar and distilled water in equal proportions. On the other hand, it is recommended to lubricate the skin of the product with a greasy hand cream. This is done to prevent drying out.

An important point that you should pay attention to before dyeing fur at home with paint is the choice of a dye. Pile structure in natural furs It is similar to human hair, due to which ordinary hair dyes are suitable for dyeing fur products, which can be found in almost any store (up to supermarkets). But it is worth remembering that the quality of the final result depends on how persistent you have chosen the dye. It should be noted that depending on the type and size of the product, you may need from 1 to 3 packages.

A little life hack: before starting the procedure, it is better to test the purchased paint on a small and barely noticeable piece of the product: this way you can make sure that you have chosen the right shade, and also make sure that the dye is evenly applied to the material.

Raccoon fur

So that dyeing raccoon fur at home does not cause problems and difficulties, you should familiarize yourself with the features of the material. Compared to other furs, the raccoon has a denser pile, which will take much more time to dye. At the same time, the number of consumables also increases: practice shows that for uniform coloring of one cap, 1.5-2 packs of paint may be needed.

The paint is applied evenly, for this you can use a brush, often included with the purchased product. The time specified in the instructions for use will be sufficient for the paint

"Grabbed" and penetrated into the structure of the pile. At the end of the procedure, the product is washed under warm running water and hung up to dry. ATTENTION! Never use a hair dryer or other drying device, as there is a possibility of damage to the product.

Karakul fur

Dyeing karakul fur at home does not require special knowledge, skills and abilities. Karakul fur can (and should) be dyed black. The paint is applied to a damp pile and washed with hands for even distribution, after which the product can be put aside for the time specified in the manufacturer's instructions. After the expiration of the period for which the paint should "grab", the product is washed under warm running water, laid out on a flat, slightly inclined surface and, with the help of simple manipulations, is cleared of excess moisture. After complete drying, the pile is combed with a regular comb in the desired direction.

Rabbit fur

So that dyeing rabbit fur at home does not lead to the "destruction" of your favorite thing, you should remember a few nuances. In particular:

The dye should be one tone darker than the original color of the thing to be painted;
To distribute the paint evenly, in addition to standard cleaning procedures, the rabbit should be immersed in a solution. washing powder for fur with water heated to 30-35 degrees Celsius and hold in it for 1 hour, then rinse under warm running water;
When performing the procedures directly, it is recommended to use the instructions supplied with the purchased paint.

Practice shows that dyes "Henna", "Basma" and "Gamma" are suitable for dyeing rabbit fur, in which the main substance penetrates into the deep structure of the pile. Drying is similar to previous products.

Fox fur

Due to the similar structure of the pile, dyeing fox fur at home is similar to a rabbit. Particular attention should be paid to the choice of shade: the most common mistake of people who undertake self-dyeing of expensive furs is non-observance of the rules for choosing the required tone. As last time, the substance should be one tone lower than the original color.

After the procedure, you can use a balm (included with the dye): it will give the product a special shine and silkiness. Dry naturally, without hair dryers, batteries or heaters. Desirable - on a horizontal surface, securing the edges of the product with pins.

Mink fur

Contrary to the common misconception that dyeing mink fur at home is impossible, the dyeing procedure does not differ from everything described above. However, it is important to remember that dyeing mink products is used purely to return them to their original appearance: when you try to change the color, you can get the most unexpected and, at times, quite frustrating result!

Sheepskin fur

In contrast to the previous methods, dyeing sheepskin at home is a little different. To evenly distribute the paint over the surface, the product is placed in a solution consisting of aniline dye and chemicals and heated at 40-50 degrees until the material acquires the desired color. But due to certain difficulties, this method is not very popular among ordinary people. Fortunately, at present, people who want to dye sheepskin are offered an alternative in the form of aerosol dyes.

The process is carried out outdoors. Do not neglect personal protective equipment, because in some cases, the dye contains elements that can harm human health (after drying, under the influence of UV rays, their harmful effects are leveled).

Arctic fox fur

Dyeing arctic fox fur at home takes place in several stages:

Pre-cleaning;
Application of paint with a brush;
Rinsing under warm running water;
Drying.

It is important to remember that the product should be dried away from fans and heating appliances. It is strictly forbidden to use a hairdryer and other drying equipment: otherwise, the structure of the material may be disturbed and you will have to contact specialists to restore it.

Silver fox fur

Painting silver fox fur at home is extremely rare: the thing is that products made of this material are resistant to wear and tear and are able to maintain their color throughout the entire period of operation. Another thing is yellowing, which occurs in 8 out of 10 cases. Dealing with it is easy enough. To do this, you can use both dry and wet methods. In the first case, a mixture of office chalk powder, talcum powder, semolina, starch or wheat flour is rubbed into the fur. Since the main cause of yellowing is grease accumulating on the surface of the fur, these substances contribute to its effective removal.

In the second case, a wet solution from liquid soap and shampoo. 5 minutes is enough for the active ingredients to penetrate the hair structure and cleanse it of dirt and dust. The solution should be washed off carefully, without clinging to the flesh (bottom layer). Before being sent to dry, the fur should be combed with a fine-toothed comb.

Conclusion

Summing up all of the above, you might think that dyeing natural furs is not as difficult as it might seem at first glance. However, if you doubt that you can do it yourself, it is better to trust the specialists: most companies engaged in such activities can guarantee a 100% effective result!

Products made from natural fur are always a priority for women, because it is beautiful, expensive and prestigious. But what if there is a problem with your favorite fur coat, it has burnt out in the sun, or paint has got on it? It doesn't matter - after all, it is quite possible to dye natural fur even at home. In order to dye natural fur, you will need the most common hair dye. The choice of color palette in this case is not limited: from fiery red to jet black. Just remember that after such dyeing, the color of the fur lasts up to eight months, after which the red one fades and fades, and the black turns into dark brown and gradually turns red. You can also try to lighten the fur, but the result can be quite unexpected: the muskrat becomes soft peach with a white undercoat, and the beaver turns yellow.

Before painting, it is worth doing a little preparatory work. Mezdra (the bottom layer of the skin) should be soaked with a fat cream, thus protecting it from drying out. Apply the paint to the pre-moistened fur - the color will look deeper and more evenly. If you do not want to radically change the shade of the fur, then you should generally dry it slightly - the color will turn out to be less intense.

After applying the paint, carefully remember the fur with your hands, rubbing the dye over the entire surface. Make sure there are no unpainted spots. Leave the product for the same time as when dyeing hair, that is, 30-35 minutes.

After keeping the right time, rinse off the paint under a powerful jet of water. You can keep the skin in a saline solution for a few minutes to keep the color lasting and the hairs to shine in the sun. Squeeze the fur gently - you can spread it out on the bathroom wall and run your hand over it intensively several times.

Then lay the skin out on the surface to dry. Better to let it drain and dry on its own. Comb through the fur in the desired direction.

Advice from Osinka.
Coloring of skins. Cheap skins, with appropriate processing and dyeing, can look like expensive furs. Previously, the dyeing of furs was a very difficult matter: it was done using different stains from chromic, iron and copper sulfate etc. The introduction of aniline dyes into practice greatly simplified production, increased the strength of the color and the range of shades obtained.

When using aniline dyes, the color appears on the fibers with the help of oxidizing agents, such as sodium perborate, hydrogen peroxide, etc. Sodium perborate is more convenient than hydrogen peroxide, it does not decompose so quickly and is cheaper.

2. Aniline dyes for skins. Dyeing skins can be done in two ways. According to the first method, the entire skin is immersed in a dyeing bath (dyeing by immersion), according to the second, the dyeing liquid is applied with a brush to the hair (aiming).

If the skins are rich in fat, then before dyeing, they should be treated with the following mixture: 500 g of slaked lime, 250 g of ferrous sulfate, 150 g of alum per 10 liters of water. Apply the mixture with a brush, after which the skins are dried and washed well several times in water. Thanks to this treatment, the hair is defatted and easier to color.

For skins that are less oily, you can use a solution of soda (6 ° B.) and soap for washing. Drinking caustic soda should be avoided.

One more tip.
First of all, we process the flesh in the following way. With ordinary glycerin (so that not a lot and not a little), we apply it to the surface of the flesh carefully so as not to touch the fur fibers along the edges. Buy ordinary hair dye of the desired color (note that the colors when painting light fur correspond completely to the pattern on the palette of paints) henna - there will be red fur, basma is dark green. When the glycerin has absorbed a little, we take a board and use sewing pins to pin the fur around the perimeter, and paint accordingly the instructions attached to the selected paint. Wash off after a given time with a shower without removing it from the board .Promak gently with a towel and dry with a hairdryer. Ready! If you want to make specks of a different color, then wrap the painted places in foil, there will be a beautiful speck.

Painting advice.
I am writing at the request of workers on the eve of winter.
We paint the fur, in my case there was a collar.
The dyeing technology is simple - we strip off the collar - so that there is only fur, no fabric, and so on.
We take hair dye - I took the black fitolinia garnier (gave the best result), we dilute the paint - the whole bottle went to the big collar, and on the board, dressed in a cellophane bag, we apply the paint with an old toothbrush.
There is such a catch - the fur is thick, the arctic fox, the mink is painted worse than the marmot - the undercoat is not always painted over. It takes a long and tedious different directions use a brush to distribute the paint evenly.
We leave for the time indicated on the paint bottle. From time to time we comb the fur with a brush, so that it would take more evenly.
We wash it off in the shower, apply (if any) balm. Wash it off again. And then we prick the wet fur along the edge of the skin with needles on the board. Dry. I took it off the board when the fur was dry and the skin was semi-dry. In the process of drying, I combed it with a clothes brush. Then she dried it in the air.
At the end, it would be good to smear the skin with glycerin, or hand cream, or just sunflower oil.
Well, then - sew! Smile
The main thing is not to dry it with a hairdryer, and not to let it dry when it is not stretched - my mink shrank after this, began to tear, in general - I ruined the fur.
But if everything is done well, my brown marmot has become completely black, soft and smells like a balm.
Good luck!

The portal contains the addresses and phone numbers of the Moscow atelier, where you can order fur dyeing. The prices for the service are presented in easy-to-compare tables. Thus, you can compare the cost of the service in different ateliers and find the best option... The portal contains reviews of visitors who have already contacted an atelier or salon. This will help you find really worthy seamstresses and tailors.

Which Moscow atelier will dye your fur best?

Fur dyeing helps to restore the former beauty of hats, fur coats and fur capes, eliminates yellowing and fading, and renews the look of the product. If the fur on the old fur coat has a good dressing, but the color has already become ugly, it is better to turn to a good master and carry out the restoration, and not throw away or put the thing in a distant closet. Where can you dye your fur with high quality, and how much will it cost?

Prices for dyeing fur and terms of work

In the atelier, painting of a fur product is carried out different ways, the most expensive is gradient and the cheapest is toning. In the first case, there is a two-color painting; not every master can make a beautiful transition between colors. For complex work, you should not save on a specialist. A simple option is toning, the fur is simply given a more saturated shade, the shine is restored. Such restoration can be ordered at any specialized fur workshop.

Average prices are:

Toning: from 1700 r. for hats, from 1500 r. for collars and cuffs, from 3500 p. for vests and capes, from 5000 p. for fur coats.
Coloring is calculated individually, but if there is no color change, then prices are about 100-200 rubles. more expensive than toning.

Dyeing natural or artificial fur takes a little time, on average 1-2 hours, it depends on the skills of the master and the area of the product. Paint a small hat faster than a large bulky fur coat.

Unfortunately, in many ateliers in Moscow there are queues of clients, especially to competent furriers, so it is better to sign up in advance. In the table you can find the company closest to you, its opening hours and contact phone number.

What is important for the customer to know

There are a number of cases when companies refuse to paint by a client, and this is due to compliance with technological standards. The restoration takes place in this way:

The lining is unpicked, the condition of the fur is checked. If the reaction is normal when moistened, then the thing will be taken to work, if the subcutaneous part of the skin begins to exfoliate, deform, then the master will refuse. Most often, products that are more than 15 years old are not taken into work.
It happens that after painting there is a shrinkage, and you need to overlap the figure. A specialist should warn about such things, since for a client this is from 2 to 10 thousand additional costs.

Arctic fox fur products, as well as diamonds - best friends girls. Spectacular polar fox coats and coats, original vests are liked by all ladies without exception. They not only warm you in the harsh Russian winters, but also look like a king.

Despite the fact that the durability of the arctic fox is very high, its color gradually loses its intensity. Over time, the dyed arctic fox becomes dull, and the white one turns yellow. The good news is that it is quite easy to restore the presentable appearance of arctic fox products with the help of staining. You can resort to the services of an atelier, but it is much more economical to dye the fox fur at home.

Features of self-staining

Furriers believe that, unlike others, the fluffy and dense arctic fox is the most practical to work with. The dyes lay on it evenly and last for a long time. The main thing is to follow exactly the instructions that we have drawn up taking into account the recommendations of expert furriers.

An important nuance! Don't paint a new and expensive item at home just to get a different color. Paint products that, if something happens, you will not be sorry: yellowed, faded, out of fashion, etc.

The process of renewing arctic fox fur can be divided into several stages:

preparation;
preliminary cleaning;
painting;
fixing;
drying.

Let's consider each stage in detail.

Training

If you want to paint a collar that is sewn on a coat or jacket, you need to carefully rip it off, and after all the manipulations, sew it in place. You need to strip the lining from the fur hats.

As for fur coats, it is quite difficult to paint large things with high quality at home. To do this, you will have to dissolve it into separate skins, and then sew it again. If the fur coat is of value to you, it is better not to risk it. As a last resort, use a tinting spray.

Cleaning arctic fox fur

Existing dirt and greasy deposits must be removed, as they prevent high-quality uniform coloring. If you neglect this advice, then in dirty places the color will turn out paler. A solution of a mixture of the following components will help to clean natural fur at home:

table salt - 2 tbsp. l .;
mild detergent - 1 tbsp. l .;
soda - 2 tbsp. l .;
a few drops of ammonia.

Combine all ingredients, dilute in two liters of warm water. Treat pre-combed fur with the resulting composition.

Apply it with a brush, being careful to spread it evenly over the entire surface. Aim to clean both the top and bottom of the fur, including the undercoat. Then wipe the lint with a damp sponge several times to rinse off the alkaline solution.

Pet shampoo, which can be purchased at your veterinary store, works well for light dirt. Dilute it with warm water, apply it with a damp sponge and gently clean it. Then wash off the soap with a clean sponge.

The skin on the inside of the fur is called the flesh. Do not wet it at this stage in order to avoid deformation. Lubricate the flesh with glycerin before cleaning to prevent it from getting wet.

Cleaning can be done much faster with professional cleaning sprays such as the FURASOL brand.

How to dye arctic fox fur at home?

It is correct to start dyeing immediately after cleaning, as the dye is applied more gently to the damp villi.

Choosing paint

Dyes for natural fur are sold in leather goods, hardware stores or fur stores. If it is difficult to purchase a special dye, we recommend using a regular hair dye of the desired shade. At the same time, the color possibilities expand almost indefinitely.

The pile of the Arctic fox is quite dense. To get a rich color, you need at least two packs of paint.

The basic rule is that fur should be dyed a few shades darker than the existing one. Admirers of colored fur items are advised to pay attention to the fashionable wine, dark blue palette of shades.

Experts note that such dyeing of fur at home will last from 6 to 12 months. Therefore, after one or two seasons, the process will have to be repeated.

Attempt at writing

If you want to dye the fox fur for the first time, then it is advisable to conduct a test for a guaranteed result. This can be done on a small piece or in an inconspicuous place, such as inside pockets or at the hem of a sleeve. Remember to protect your hands with rubber gloves.

If you are satisfied with the result, proceed to dyeing the entire product. It is best to apply the dye composition to the fur with a hairdressing brush. Distribute it, evenly painting over each strand. The holding time may vary, follow the instructions in the package.

After analyzing the reviews of fans of fur dyeing at home, we can conclude that a stable result is obtained when using inexpensive hair dyes. Domestic dye compositions are more variable in color. These paints provide a wide field for experimentation: they can be kept until the desired shade is achieved. Then the paint must be carefully washed off with water at a temperature of 30-40 ° C.

Color pinning

To fix the resulting shade, dilute 5 tablespoons of ordinary 9% table vinegar in 2 liters of water, and rinse the dyed fur in the resulting solution.

If you want to make the fox fur more fluffy and silky, apply a conditioner for colored hair on it. Some manufacturers already have such a balm in their packaging. Let sit for a few minutes and rinse again with running water. Then blot the garment well with a dry terry towel.

Drying

Remember to brush the pile periodically so that it does not build up in one direction. A downy cat brush is ideal for brushing.

If you are working with individual skins or a collar, then they should be stretched on a wooden board and attached with pins before drying. This is done so that the flesh does not shrink after getting wet.

The drying process will be completed when not only the pile, but also the flesh is dry. This usually takes 2-3 days. If you did everything correctly, the item will look like new.

Creative transformation of fur

After practicing with a solid color, experiment and color the fur in a more original way. Let's consider how to get a spectacular leopard print that does not leave the fashion pedestal.

For coloring, you need two types of paint: black and brown. Additionally, you need to make a stencil from thick cardboard. Cut out a pattern of asymmetrical holes in it. Stencil the fur and paint the cut out areas brown as described above. The next step is to apply black highlights in the center of the brown spots.

If you want to get a spotted color, use hairdressing techniques for highlighting. For example, pre-roll small strands of fur in foil.

Another spectacular option is to paint only the tips of the villi. A rich shade will turn out if you choose a tone lighter than the main one for this.

How to lighten the fur of a polar fox

This method is great for whitening yellowed arctic foxes or lightening dark foxes. To do this, you need a hair bleaching compound or simple hydrogen peroxide. When using clarifiers, follow the instructions supplied with them.

Dissolve the peroxide tablets in water, apply the solution to the fur and leave to act for 15 minutes. It is undesirable to withstand more than a quarter of an hour, since the pile can thin and become brittle.

Rinse the product and dry. Then you can tint in the desired shade. You should not lighten the fur of the Arctic fox more than once, otherwise you run the risk of irrevocably spoiling it.

Grandma's recipe

This method was used by our grandmothers to bleach yellowed fur when there were no ready-made paints on sale. Its effect is not based on chemical reactions, but on optical illusion and keeps "until the first snow." Dilute a small amount of blue in warm water, dampen a sponge and lightly rub over the nap. The result will appear after complete drying.

Express method

Specially designed dyes for fur, which are produced in the form of an aerosol, will help to quickly refresh a fur product.

Using such a can is quite simple. Keep it at a distance of 20-25 cm and spray alternately on individual strands. To prevent the pile from sticking together, periodically brush it with a comb.

Manufacturers position such processing as toning. Deep coloring cannot be achieved with this method. It is good when you do not want drastic changes, but want to mask minor defects. For example, yellowed tips or spots. Such a can is also convenient for stencil work. The color range of coloring aerosols is classic: white, black, shades of brown and gray.

How to paint the skin at home?

It happens that the fur is rubbed in places so much that a light skin shines through it. In such cases, its color can also be corrected. When it comes to skin, bald spots can be tinted with leather dyes. Do not forget to grease it with glycerin first. It is better to use special markers of the desired shade on the finished fur product.

You probably already realized that, with the exception of some details, dyeing the fur of a polar fox is no more difficult than hair. In this case, the same techniques are used: uniform application, exposure, fixing, rinsing with balm.

In addition, you yourself can control the shade using a preliminary test. The color obtained after dyeing in the studio may pleasantly surprise you.

Numerous reviews of the owners of "lively" furs indicate that you can update your winter wardrobe at home. Do not rush to give up on faded or boring things made of arctic fox. Fantasy and skillful hands will prolong the life of expensive clothes and make your friends congratulate you on a new thing. Experiment and enjoy the warmth and beauty of your favorite things!

In the process of long-term wear, a fur product may lose its attractiveness only due to the fact that the fur has faded either from the sun or from exposure to precipitation. In this case, there are two ways of restoration. Specialized enterprises that provide dry cleaning and painting services are able to do it efficiently. But you can give a "second life" to your favorite thing at home. Following the instructions and applying a share of your own imagination, you will be able to create a unique work of art.

If the age of the fur product is indicated by its color, then update appearance can be done by painting.

For gray karakul, only black or brown is used. The mink is dyed in its native colors in order to restore the faded shades. Black or brown pigment is suitable for mouton products. Fur things in beige tones are dyed in all shades of brown to enhance the intensity of the native color. Choose a paint one or two shades darker for work.

The main condition for high-quality and uniform dyeing is clean fur. An alkaline solution proved to be the best cleaning agent, its composition is as follows:

soda (dessert spoon);
salt (dessert spoon);
ammonia (teaspoon);
about 15 drops of detergent
1 liter of water.

Lightening yellowed white fur is an additional element of color restoration. To do this, use a solution with hydrogen peroxide (teaspoon) and ammonia (10 drops). This tool can remove yellowness from the fur of the silver fox. In the process of processing with such a composition, deep soaking should be avoided. A test is preliminarily made on an inconspicuous area of the product. For clarification, 15 minutes is enough. It must be remembered that b a longer process will make the ends brittle.

Chalk and starch help to remove yellowness on the fur of a gray rabbit for a while. The powder is evenly and lightly rubbed over the upper part of the pile and shaken off. This method will not harm the product, so you can use it frequently. Gray rabbit fur is dyed with hair pigment. There is also an absolutely safe method in which an aqueous solution of blue is carefully applied with a brush to the entire surface of the product. The composition should be light blue.

To ennoble the faded raccoon fur, use a hair dye with a lightening effect, as a result of which the product will look gilded or silvered.

You can update the fox fur with thick potassium permanganate. Treat it gently with a sponge, not allowing things to get wet.

Faded ends of the fur are painted with suede spray paint. Spray the agent slowly, keeping the distance between the fur coat and the sprayer about 70 centimeters.

How to dye fur with hair dye?

For dyeing a fox or mink on your own, hair dyes are suitable. This method has been tested in practice and always gives positive results when painting not too old things. It is better to check the effect of even high-quality products on a small inconspicuous area of the product.

To dye fur at home, you will need to follow these steps:

Straightening the strands of natural fur, apply a thin layer of greasy cream or glycerin to the flesh.
Gently moisturize the entire fur surface.
Apply the product as carefully as when dyeing your hair.
Leave for a while. Duration of staining - according to the instructions on the package with the dye.
To enhance the effect of the paint, a saline solution is evenly applied to the entire surface.
Wash off the paint under a stream of water from the shower.
Remove excess with a rag or absorbent paper.

After drying, the fur is combed, observing the natural direction of the pile. This paint lasts up to six months on a fur garment, and this is often enough to make the thing look new.

A simplified version of the saturation of the tone is coloring with a toning shampoo (in accordance with the instructions on the package).

For staining with multi-colored paints, homemade stencils are used. The spots are painted alternately.

Faux fur is easier to dye. You can use toning shampoo and hair dye. The sequence of actions is as follows:

Before dyeing, the product is fixed.
The agent is applied in the direction of the fibers.
Leave the paint to soak. The time must match the instructions in the instructions.
After the procedure, the fur is washed, dried and combed.

Experts do not recommend experimenting with coloring new things.

Home or professional dyeing will only slightly extend the life of the fur garment. After a while, the pigment comes off, and the thing becomes faded again.