How to make flip flops out of tires. Tire Sandals

When it comes to DIY fashion items, you can't ignore shoes. Shoes handmade is an interesting and unique way to develop individual approach to your wardrobe, as well as give some things a second life, which can serve as a great example for others. And this time, your attention will be presented to a pair of retro-style sneakers made from old tires and denim patches.

The idea of ​​​​creating such homemade ambassador sneakers after watching the Tarahumara races. The Tarahumara are an indigenous people who live in an area with massive canyons. Residents cover incredible distances in homemade sandals made from old tires, called "hauraches". For ordinary people, these sandals are not very comfortable, so below is how to make more comfortable shoes using the same tires.

Necessary materials for making homemade sneakers:

Aluminium foil;

Old sneakers;

Glue for shoes;

Old tires or a flat piece of rubber, about 6-8 millimeters;

Old jeans or other durable fabric

tissue waste;

20 krengels (iron spacers);

Hammer;

Sewing machine;

Sewing pins;

Rubber bands (rubber bands);

Clothespins;

A good pair of large scissors;

Making sneakers from tires

1) Take a pair of old sneakers that fit you well. Cut a sheet of aluminum foil long enough and wide enough to wrap the entire length of one shoe. Wrap aluminum foil around the shoe so that the 2 ends meet at the heel and the sole is fully wrapped.

2) Take a marker and draw the outline of the upper sole of the shoe onto the aluminum foil. Then turn the shoe over and continue to draw a line on the foil until it closes. Circle the upper part of the sneakers in the same way, not forgetting about the groove for the tongue.

3) Cut out the foil along the lines you drew. Attach the trace cut out of the foil and trace around it with a “template” marker on the fabric. Do the same to get the second track. Don't forget to also circle another outline next to each of the footprints one centimeter from the previous outline. Only then cut out both traces.

4) Now take the top of the foil, cut it out along the contour and unfold it so that it does not tear. Attach to the fabric and carefully trace around the contour with a marker. Here, too, adhere to the tactics that you will need to draw another circuit for the firmware. Cut out fabric pieces.

5) You will also need to cut the tongue out of the fabric for the shoes. It should be about 10 centimeters wide and 18 centimeters long. In a pinch, you can then shorten it later when it needs to be sewn to the shoe. Sew along the edges of the fabric, which will be visible when the shoes are completely finished. To do this, wrap around about 5 centimeters of fabric and sew it with a sewing machine. This does not only apply to tongues.

6) Take krengels (iron spacers) and fasten them to the upper fabric part for sneakers, 10 pieces for each (5 on each side), having previously made small holes. Use a hammer. These will be the holes for our laces. Attach the tongue to the inside of the shoe with sewing pins and adjust it the way you want it to look.

Using various colored fabrics to cut out shapes to decorate your shoes. Then sew them all the way around the edges of the top of the sneakers. You should get it as shown in the photo.

7) Now the blanks can be wrapped around the legs and secured with sewing pins so that nothing stings anywhere. But remember that at the moment the outer part of them should be inside. Take the shoelaces and thread them through the holes, tying them. This way you can see how the shoes fit on your feet.

8) Remove the workpiece and lace it up again. Turn the blanks inside out (that is, leave them as they were). Now carefully fasten the part that is responsible for the sole, and carefully sew everything. Do the same for the second shoe, stitching the pieces together.

9) Remember to sew along the black line of the marker that you applied to the fabric. Don't forget to leave some extra space around the toe of the shoe. It will probably tighten up when you glue the sole. Turn the shoe inside out so the front is on top.

10) Put the shoes on your feet to make sure they fit well. Turn it inside out again, and go through the second seam again to strengthen the firmware. You can also make some adjustments at any point and cut off excess fabric so that the shoe fits comfortably.

11) Now take a knife and carefully cut the sides of the tires so that only their flat part remains. Now attach the foil track and trace it on the tire twice with a marker to make two tracks. Cut them out.

High-quality sneakers as a result of prolonged or intensive use can wear out in the sole area much faster than their upper part fails. For those who have such a problem, this master class will help. The rubber sole for sneakers will be made from an old tire.

materials

For such an update of shoes you will need:

• an old tire or a new one (if it is one and no one needs it);
• good glue for rubber (ideally professional glue for repairing tires);
• sharp knife;
• acetone;
• cotton wool or rag;
• the shoes themselves.

Step 1. Cut off a piece of the tire with a knife. Cut off the center piece. The length of the piece should be equal to the length of a pair of sneakers, the width should be the width of the widest part of the sole. Cut off so that you have the top of the tire.

Step 2. Degrease the sole of the sneaker and a piece of cut rubber by wiping it with a cloth soaked in acetone. Be sure to thoroughly wash your sneakers first.

Step 3. Place a sneaker on a piece of tire from the wrong side of it and circle its outline with chalk. Do the same with the second copy.

Step 4. Cut the tire into two pieces. Lubricate each of them with glue.

Step 5. Put on your sneakers and stand on the tire, trying to get into the previously indicated contour. Wait fifteen minutes without moving for better adhesion of materials. After, carefully remove the foot, press down the sneakers with a press and leave for the time indicated in the instructions for the glue. The most common bonding time is 24 hours.

Step 6. After the glue has dried, cut off any excess with a knife.

There can be many reasons why you may be left without shoes in the field or hiking away from populated areas. Here's an option: the shoes were left to dry by the fire, but you overlooked - and it partially burned down. Another option: your dog, playing with a boot on the bank of a mountain stream, accidentally dropped it, and the boot quickly swam downstream. The dog liked this dynamic scene, and she repeated the procedure with the second boot.

How to make your own shoes out of nothing

But now we will not talk about the reasons why you lost your shoes. In the off-season or in winter, you need to find an immediate way out of this situation. First of all, you need to insulate your legs. You can wrap them with any dry warm soft things (jacket, torn pants, sweater, etc.), cover them with dense material from above and then tighten them with a rope. You can also insulate your feet by stuffing bird feathers, down, dry leaves, moss or grass between two layers of socks worn on your feet (or layers of windings).

After that, it is necessary to build some kind of temporary shoes from improvised means. Homemade shoes will help you out until the end of your autonomous existence or until help arrives.

The simplest shoes, commonly referred to as a “wrap” are several pieces of dense dry fabric measuring 80x80 cm. These pieces are superimposed on each other and then folded so that a right-angled isosceles triangle is formed. The foot is placed in the center of this triangle with the fingers towards the right angle. This corner is bent first, followed by others. On top of the "wrapper" is tied with thin straps or ropes.

Can be turned into shoes plastic bottles. If one bottle is available, then it must be cut lengthwise into identical halves. Legs are placed in these halves and tied around with ropes.

If there are two bottles, then a hole is cut out in each of them so that the leg with the toe extended forward can freely pass into it. This "boot" is more comfortable and more airtight. Of course, on such plastic boots you will not go far on slippery slopes or rocky paths, but on grassy soft ground they will serve well and for a long time.

Sturdy shoes are obtained from motorcycle or car tires. Soles are cut out of the tire, and straps are cut out of the chamber, with the help of which the soles are attached to the legs. It should be remembered that such hard shoes should be worn on legs well wrapped in several layers of fabric.

A softer motorcycle tire can simply be cut into short (leg-length) lengths. Get "boats". You need to insert your legs into them, pull off the upper edges of the “boats” with straps or ropes, and you can go about your business.

Soles with lugs along the edges are cut out of a car tire according to the size of the foot. To do this, a template is cut out of cardboard or thick paper, as in the figure:

According to this template, soles are cut out of the tire:

Straps (or ropes) cut from the camera are attached to the ears of the soles. Now you can put on the received sandals, fasten the straps (tie ropes) and go where you need to.

Another option: two soles are cut out on the side of the car tire (fragment “a” of the lower figure), two cuts are made between the layers of the tire (fragment “b”), straps or ropes are threaded into these slots (fragment “c”). It turns out another model of sandals.

As the experience of poor African countries shows, very comfortable shoes can be made from old tires. Afghan peasants also make original sandals from tires.

An impromptu sole can also be made from a piece of birch bark (birch bark), linden bark (bast) or willow. Such shoes for long-distance transitions are of little use, but for some time they can protect the feet from thorns, sharp stones and hypothermia.

Practice shows that people who find themselves in extreme conditions successfully use a variety of improvised means as shoes: metal, plastic and other durable boxes (for example, old canisters from brake fluid or oil), earflaps tied to their feet (and so on). d. to the extent of imagination). In extreme conditions, reliable homemade shoes can be necessary condition survival.

These articles are also useful to read:

An entertaining video on how to update old shoes:

What use can be made of old car tires other than creating swans and flower beds? African craftsmen also make shoes from used tires, which are sold to the local population and tourists.

Many people know that car tires are quite often used as flower beds, garden figures and even pieces of furniture. In Africa, craftsmen also make shoes from used tires. Due to the high strength of the material, tire sandals do not wear out for up to 10 years: they do not fall apart, do not wear out and do not get wet. You can buy them for almost nothing at a price of 2-3 dollars, which makes them popular among the local poor population. The technology is quite simple, if not primitive. Africans cut out blanks for the soles from found orphaned tires, which are then supplemented with straps and ropes for fastening to the legs. The flat inner side of the rubber is adjacent to the heel, the tread - to the ground.

You can meet similar shoes in many African tribes. But most of all, the Kenyan Maasai tribe became famous in this craft. Tire shoes have even become one of the country's attractions and are successfully sold to tourists as souvenirs.

Some entrepreneurs, based on Masai technology, have created entire industries focused on a European buyer. An example is the online store Maasai Trends. The shoes of this company are sewn by the same craftsmen, but the quality of the products is higher. For example, almost new tires, leather and denim are used in production. good quality. In a word, slippers come out much better than the creations of artisans for the Kenyans themselves. Yes, these shoes cost a lot more. If you believe the prices indicated in the online store, then children's sandals will cost $ 12, men's and women's - up to $ 19.

From one old car tire you can make 4 pairs of sandals. Finding a tire from a truck promises a much greater profit - up to a dozen pairs of shoes will come out of it. The actual production process usually begins with a search. Sometimes it comes to theft: it is not for nothing that tourists from Europe and America are advised to carefully monitor the safety of wheels and spare tires. True, in Lately local businessmen are not up to theft. Sales are slowly dropping as equally cheap but more convenient Chinese products enter the market. After the material is obtained, the African artisan is armed with an awl and a hammer and gets to work.

In the assortment of manufacturers you can find different kinds shoes. The simplest Masai version is an ordinary piece of tire with holding straps. There are also more advanced types, such as flip flops and even shoes with heels in the form of a piece of uncut tread. Sometimes the assortment is expanded with dishes, baskets, buckets and other utensils.

Even more interesting

Shoes are one of those items that have always been and will be used for creative and scientific experiments. Let's find out what the shoe industry has already surprised the world in 2018.

Before you, the first article from the cycle on the topic "Sandals with your own hands." This short instruction, how do their hands tire sandals.

Before we move on to the cutting process, let's talk about sandals made from old tires. In the open spaces world wide web there is enough information about the production, so I will not torment you with unnecessary information, I will just give a few tips that are based on my personal experience. They are not very comfortable to wear barefoot, but they work great with moccasins or thick socks.

Step 1: Choosing Tires

First, forget about using rubber with metal wire. It is difficult to cut, no matter what you cut with. In addition, pieces of wire flying in all directions can harm you, not to mention that you will end up piercing your finger or foot.

The most common source of material is car spare tires. They come with the mark "temporary use, driving speed no more than 72 km per hour." The reason is that there is no cord in the rubber structure. You can buy these tires at a car dealership or at a flea market. In addition to these tires, you can use tires from a lawn mower or ATV tires.

Step 2: Cut the Tires

The original idea was to only use hand tool, but eventually abandoned this idea and went to a power tool store. After removing the tire from the disc, cut off the sides with an electric jigsaw, after making a hole for a nail file with a (knife). Next, using a hand saw/jigsaw, cut the tire into four equal pieces to make two pairs of sandals.

Step 3: Cut out the sandals

Let's draw a preliminary drawing of the leg on the inside of the tire, and then cut out the blank. For cutting, I first used an engraver with a small cutting disc. He cut, but it was difficult to hold him and he made a mess. The cut blanks were terrible (they moved to the corner of the workshop, it’s unpleasant for me to even look at them). My father was a carpenter and he suggested using a chisel. After the first hit, it just bounced off, leaving a small mark.

There were attempts to cut with a knife. It cut well, but it would take a very long time and hundreds of passes to get a set of cut sandals. After that I switched to a small thermal cutter (usually used for cutting foam). Having plugged it into the outlet and let it warm up, I started another attempt to cut the tire ... And what do you think? I couldn't believe it, the nozzle was cutting rubber like a hot knife cuts butter. Just a gentle wiggle to puncture the rubber and no more extra effort. The heat cuts the rubber, but it also keeps the blade from slipping, as is the case with a cold blade. All this allows you to make large cuts, beautifully, smoothly and accurately. You can accidentally burn yourself and cut yourself, so be careful. In addition, cutting must be done in the open air, smoke and smell are emitted, although it is not much, but safety is important. The simplicity of this method is that in extreme conditions it will be possible to heat up a knife blade or a piece of any other metal and cut sandals.

Step 4: Sandal Finishing

The sandals were made on 5 protrusions for attaching nylon straps and ties. First, we cut out the sandals with a supply of material, because it is better to make additional minor changes than to re-cut the workpiece. Leave the protrusions as long as possible. In addition to the spare length, you get additional foot girth. We will use the engraver from the heel tab, because it was too stiff.

We put on shoes and oversized sandals on them. This is done in order not to make mistakes during trimming and not to start the manufacturing process from the beginning. Trimming is carried out, all with the same hot blade. Next, mark the slots for attaching nylon straps. Drill through the hole at the end of the lines, and then cut the slots.

Step 5: Install the straps

All that remains to be done is to thread and sew on the straps.

Sandals passed the test normally. But the front edge of the moccasin protruded about 1.2 cm beyond the lining. Once again, leave the length in reserve (especially on the tabs) until the moment when you test. Get a hot cutter before you get started. This will save you a lot of time.

Thanks for attention! Happy walking!