Flat drive belt for a milling machine. Polyamide flat drive belts for machine tools

Depending on the specifics of the internal structure of various equipment and technology (for example, milling or sharpening machines, cars, etc.), there is a wide variety of types of drive belts on the market that ensure their performance. Such rubber products include: wedge, poly-wedge, gear, flat and other models. The latter type of belts is one of the most widespread in the world as it has a number of advantages.

The main advantages of drive belts for various types of machine tools

Compared to toothed belts, flat belts have a number of additional advantages. Among the main advantages of such rubber goods it should be noted:

• simple form and low cost;
• smoothness and noiselessness;
• almost complete absence of vibration and jolts.

The most important advantage of flat belts is the ability to smooth out jerks at high speeds. This is possible due to the special shape of the product. The fact is that flat drive belts for machine tools cannot quickly catch on the pulley (slippage occurs at the time of starting), so this process occurs gradually.

The Holzer Flexo company sells a variety of rubber products. The cost of the products sold is on average lower than that of competitors, and the geography of the main production forces is evenly located throughout Russia, which saves time on order transportation.

Flat belts are commonly used as conventional drive belts for low, medium and high load transmissions.

Concerning consumer properties, then they are as follows:

1. Such belts are highly durable;
2. Due to its elasticity, there is no need for additional tension;
3. Holds well and has high wear resistance;
4. It perfectly tolerates any chemical and climatic factors;

Now let's talk about the advantages of using flat belts:

• The belt has a quiet, vibration-resistant factor;
• Reduces shock wave due to its distribution along the entire length of the belt, which is achieved due to the elasticity of the belt;
• Flat belts do not require any Maintenance, which is an indicator of its reliability and ease of use;
• The belts under discussion have good durability, due to the fact that the belts are elastic, they themselves work for a long time and at the same time soften the load on the other mechanisms of the equipment, which also prolongs the service life of the equipment in general.

Technical characteristics of driving flat belts

	Thickness / min. Pulley diameter, mm	Strength, N / mm width	Modulus at 1% relative elongation, N / mm width	Surface type	Note
Flat drive belts for light / high speed transmissions or for transportation Textile surfaces (impregnated or with a thin rubber coating), including spindle tapes.
Flat belt KHST-50				Fabric / Cloth	Spindle tape / transport
Flat belt KHST-51				Fabric / Cloth	Spindle tape / transport
Flat belt KHST-80/15				Fabric / Cloth	Transport
Flat belt KHST-80/25				Fabric / Cloth	Drive / transport
Flat belt KHST-90				Fabric / Cloth	Drive / transport
Flat belt KHST-90G				Fabric / rubber	Drive / transport
FNF-3 flat belt				Fabric / Cloth	Light drives / transport
FNF-6 flat belt				Fabric / Cloth	Light drives / transport
Flat belt FNF-100				Fabric / Cloth	Light drives / transport
Flat drive belts for most light to medium duty transmissions, or for transportation (rubber / fabric or rubber / rubber)
KHS-F0 profile				Fabric / rubber	Light drives / transport
Profile KHS-F1 / 12				Fabric / rubber	Light drives / transport
Profile KHS-F1 / 17				Fabric / rubber	Light drives / transport
KHS-1 profile				Rubber / rubber	Light drives / transport
Profile KHS-1/20				Rubber / rubber
Profile KHS-1/30				Rubber / rubber	Folder Gluer
Profile KHS-1/40				Rubber / rubber	Folder Gluer
Profile KHS-2/30				Rubber / rubber	Drive unit general purpose
Profile KHS-2/60				Rubber / rubber	Folder Gluer
Profile KHS-3/30				Rubber / rubber	General purpose drive
Profile KHS-3/40				Rubber / rubber	High abrasion drive
Flat drive belts for heavy duty machine tools 2-way power transmission at high speeds For driving roller conveyors.
KHS-140T profile				Rubber / rubber	Drive / transport
KHS-2T profile				Rubber / rubber	Textile machines, etc.
KHS-A2T profile				Rubber / rubber	Textile machines, etc.
KHS-250T profile				Rubber / rubber	Textile machines, etc.
KHS-251T profile				Rubber / rubber	Textile machines, etc.
KHS-A3T profile				Rubber / rubber	Textile machines, etc.
KHS-390T profile				Rubber / rubber	Textile machines, etc.
KHS-391T profile				Rubber / rubber	Textile machines, etc.
KHS-A4T profile				Rubber / rubber	Textile machines, etc.
KHS-570T profile				Rubber / rubber	Heavy / powerful drives
Leather coated flat belts for heavy starting (jerk) or for work in an oil mist environment; wire drawing machines for the cable industry, variators with tapered pulleys, etc.
Profile KHA-6T				Leather / leather	Light / medium drives
Profile KHC-2A6T				Fabric / leather	Medium drives
Profile KHC-3A10T				Fabric / leather	Medium drives
KHC-A40T profile				Fabric / leather	Powerful drives

Main areas of application

INDUSTRIES	TYPES OF MACHINES
TEXTILE	Carding, roving frame, belt, spinning, etc. Pneumatic and high speed spinning Spindle webbing for ring spinning machines Rope-twisting, tier-twisting and double-twisting machines Automatic winding Drum dryers and brush cleaners
FLOUR MILL AND BAKERY	Brush, washing machines Roller mill machines Baking powder, cleaners and blowers Mixers
POULTRY PROCESSING	Plucking lines
CANNED MEAT	Cutter drive, tin lines
DAIRY	Milk Dryer Sprayers
TOBACCO	Drives, latching and transport belts, incl. seamless
FILLING AND PACKING	Stretch belts with soft rubber and increased coefficient of friction for packaging films
PRODUCTION OF CARDBOARD AND FILM PACKAGING, PRINTING	Printing machines, die cutting presses Folder Gluer, Folding Box Making, Soft Rubber Feeders Bag making machines
PAPER PRODUCTION	Conveyors for self-tapping and slitting machines Bag making and paper bobbin winders
WOODWORKING	Shaped milling, 4-sided, circular saws, shaving and tenoning machines Sawmills, chipboard production, etc.
METALWORKING	Automatic lathes Grinding machines Precision drilling, etc.
DIFFERENT INDUSTRIES	Car body press Extruders Generators Centrifugal and pneumatic pumps Fans

Buy flat driving belts Moscow

We offer quality belts with a guarantee of long-term performance, as our products are the benchmark for quality. Working directly with the manufacturer, you are guaranteed to get the most favorable prices for all our products. For more information about our flat belts, please contact our consultants by phone, which are indicated in our contacts.

The company "RUSIMPORT RTI" has been supplying parts and spare parts for conveyor and transport equipment for many years. We are always ready to deliver any equipment to your facility, as well as help you repair your parts and mechanisms. In our product catalog you can find the following products, which are designed for conveyors different types:
Conveyor belts;
Conveyor belts;
Drive belts;
Flat belts;
Conveyor chains;
Transporting nets;
Mechanical connectors;
Gearboxes and motors;
Composite sleeves for NGOs;
Vulcanizing presses;
Consumables;
Bearings;
Rubber technical plate;
Silicone products;
PVC products;
Pulleys and more.
You can learn more about each component of the conveyor in the corresponding section or from our specialists. If you need any advice, then just call our consultants at the numbers indicated in our contacts, and they will be happy to advise you on everything and answer all your questions. We deliver goods to any point Russian Federation within the exact time agreed in advance.

Machine belts - important element in the operation of the equipment. This technical detail is an indispensable part of the machine:

drilling;

woodworking

lathe;

milling;

format-cutting;

Holzer LLC manufactures and sells belts for various types of machine tools. Our products can be bought in cities such as Moscow, Lyubertsy, Podolsk, Novosibirsk. Russia is an industrial country. Therefore, our products are in great demand. The price for it is quite low, while the quality of the products meets all modern standards and norms. If you want your machines to work stably and trouble-free, you should definitely buy our belts. It doesn't matter what kind of equipment you have. We produce belts for drilling, woodworking (Master Universal 2000, etc.), turning, sharpening and other types of machine tools.

The belts we produce are of the highest quality level. Therefore, with our products, your machines will work like a clock.

Main product characteristics

The catalog presented here contains all drive belts for various types of machine tools. And there are many of them. You can buy drive belts from us for almost any type of machine tool. Our assortment is huge. We manufacture tapes in a wide variety of types.

Drive belts for machine tools are needed primarily to transfer torque from one shaft to another using pulleys. Such products are used in a huge number of very different mechanisms. Their working surface is on the side. Various types of these products are produced. Drive belts for machine tools are: wedge, flat, toothed, round, wedge-shaped, balancing.

For example, V-belts are used in agricultural machines, various industrial units, etc. They are also used in the device of modern urban transport. V-belts for machine tools are made of cordon fabric that is coated with layers of rubber. The base layer is located between the longitudinal portions of the fibers. The price of such products may vary, depending on the model and manufacturer.

Machine tool flat belts are used in almost every industry. They are necessary to ensure the rotation of the pulleys, increase the accuracy and synchronization of work. Flat belts for machine tools have excellent performance. Their tape tolerates vibrations well and runs almost silently. Flat products have proven their worth in many industries. Moreover, their price is acceptable. Therefore, buying flat belts for machine tools will not be very expensive. Especially in the company Holzer LLC.

Timing belts for machine tools combine the features of a belt and chain drive. The belt rotates very smoothly. Timing belts for machine tools generate rotation without skipping effect. Thus, their efficiency is higher than that of conventional products. Thanks to such belts, the load on the machine shaft will be significantly lower.

The round machine belt can be used for small machines with low power. Although the scope of its application is wide enough. The round machine belt can be used in a wide variety of gears. They are equipped with a wide variety of installations, devices and mechanisms. A round belt for a machine tool does not lose its performance at an air temperature from -60 C to + 80 C. Thus, it can be used in almost any temperature conditions... Round products have low cost... Their price depends on the manufacturer of the product. You can buy from us different kinds such products.

V-shaped machine belt belts have their own field of application - variator systems. They work great. These products have proven to be reliable and effective. CVT gearboxes cannot function without them. They are part of the whole mechanism. CVT gearboxes are one of the most reliable and efficient.

In lathes, machine belt belts are widely used. Their use is primarily due to their quality. A tape made from high quality materials will last long enough.

Our advantages

Sale of belts for machine tools is the main activity of Holzer LLC. The price list contains various types of products (flat, round, etc.). Our online store offers a wide variety of belts for machine tools and other equipment. You can order and buy almost any belts from us.

We produce belts for both large industrial equipment and for small lathes. The price of the products is quite low. Since we are a manufacturer own products, their cost is significantly lower than that of most of our competitors. Therefore, it will not be an invoice to buy our products.

If you need professional advice, you can always contact our staff. They will answer all your questions. They will tell you in detail about our products and help you make the right choice. Thanks to this, you can purchase exactly what you really need. You don't have to overpay and buy a useless thing. The quality of the equipment is high. The products comply with all international norms and standards. Its operation is reliable and durable.

In order to place an order, you just need to contact our employees. They will issue it as soon as possible. You will be able to receive your purchase quickly and without delay. We have been on the market for a long time. During our existence, we have established ourselves as a reliable and inexpensive supplier. Many of our customers are already convinced of this and use our products, which are distinguished by the highest characteristics. Therefore, working with us is profitable, convenient and comfortable!

Production of flat belts for machine tools and equipment meets the highest requirements. High-quality belts increase the reliability and productivity of equipment, do not require special maintenance.

Application: textile industry, industrial machines, sawmills and chipboard machines, centrifugal and pneumatic pumps, roller mills, stone processing lines, generators and fans, drum milk dryers, openers and kneaders

Flat endless cord-cord belts (type I, II, III):

Flat drive belts help to smooth out jerks (torque surges) during heavy starting at high speeds, due to initial slippage and gradual engagement with the drive pulley.
Flat drive belts absorb engine oils and greases to a large extent, thus ensuring power transmission without loss of coefficient of friction over a long period of time.
Flat drive belts are easy to operate and have a long service life.

Flat endless cord-cord belt with double-sided fabric covering (type II)
Flat endless cord-cord belt with one-sided fabric covering (type I)
Flat endless cord-cord belt without fabric covering (type III)

Flat belt parameters, mm
Length (L) 1000 ÷ 5600
Width (W) 25 ÷ 200
Thickness (t) 2.2 ÷ 6.0

Flat belts based on polyamide fabrics

Flat belts with a polyamide core replaced the classic flat rubber-fabric belts.

The pulling layer of flat belts is polyamide with its high tensile strength and withstand high loads, practically without residual elongation.

Various elastomers and leather are used for the working sides of the flat belts. Flat-belt transmissions using flat belts with a polyamide core are distinguished by quiet running, precision of synchronous rotation and high efficiency.

Flat belts with a sealed core are resistant to oils, fats and other solvents, have high wear resistance and significant tensile strength. fabrics

Application of flat belts with semiconductor core:

high power transmission in classic and multi-pulley transmissions;
in packaging machines; in paper and textile industry as tangential belts; for cutting tools and machine tools; for loading devices.

Flat drive belts (based on traction polyamide core) for power transmission from the world's leading manufacturers, offered to your attention, it is possible to buy both in cash and by bank transfer. These belts are designed to work in power drives of industrial equipment.

Flat drive belts can be used for heavy duty and high tensile forces, such as main drives for roller mills, paper machines, stone cutting and stone crushing machines, sawmills, stamping presses in metal working, etc.

Main differences and advantages:

Flat drive belts help to smooth out jerks (torque surges) during heavy starting at high speeds, due to initial slippage and gradual engagement with the drive pulley.
... Flat drive belts absorb engine oils and greases to a large extent, thus ensuring power transmission without loss of coefficient of friction for a long time.
... Flat drive belts are easy to operate and have a long service life.

BELT TYPE	Manufacturer	General thickness, mm	Thickness polyamide, mm	Upper layer	bottom layer	Min. Ø Pulley, mm	Limiting strength to break N / mm width	An effort tension at 1% relate lengthening	Color
KHST-51	India	0.6	0	the cloth	the cloth	10	90	1.5	--
TP-5	Turkey	0.7	0	PA fabric	PA fabric	15	90	4	Yellow - Green
KHS-20FBG	India	2	0	rubber	the cloth	40	120	3	--
KHST- 80	India	0.9	0.25	the cloth	the cloth	20	100	2.3	--
PS- 55	India	0.9	0.25	HB fabric	rubber	20	100	2.3	--
KHST- 90	India	1.2	0.25	the cloth	the cloth	20	100	2.3	--
KHST-90G	India	1.2	0.25	the cloth	rubber	20	100	2.3	T.Zel.-Chern.
FNF- 3	India	0.9	0.25	the cloth	the cloth	20	100	2.3	T.Zel.
TT4	Turkey	1.2	0.25	the cloth	the cloth	15	90	4	Green-Green
FNF- 30	India	0.9	0.25	the cloth	the cloth	15	90	4	T.Zel.
KHS-F0	India	1	0.25	the cloth	rubber	20	80	2.3	Green-Green
TG4FSTR	Turkey	1.1	0.2	rubber	rubber	20	90	4	Green-Black
PF- 0	India	0.9	0.2	the cloth	rubber	20	80	3.0	Green-Green
FNF-6	India	1.1	0.4	the cloth	the cloth	30	150	3.5	--
TT6	Turkey	1	0.4	the cloth	the cloth	20	135	6	Green-Green
FNF-60	India	1	0.4	the cloth	the cloth	20	190	3.8	Green-Green
KHS-F1 / 1.2	India	1.2	0.4	the cloth	rubber	30	150	3.5	Green-Green
TG4	Turkey	1.2	0.4	rubber	the cloth	20	90	4	Green-Black
PF-1	Japan	1.3	0.4	the cloth	rubber	30	150	5	Green-Green
KHS-A1	India	1.4	0.4	the cloth	rubber	30	150	3.5	Green-Green
TG6	Turkey	1.2	0.4	rubber	the cloth	20	135	6	Green-Black
KHS-F1 / 1.7	India	1.7	0.4	the cloth	rubber	30	150	3.5	Green-Green
RNF-60 / 1.7	Japan	1.7	0.4	the cloth	rubber	30	150	5	T. Green-Zel.
KHS-F1 / 20	India	1.2	0.4	the cloth	rubber	30	150	3.5	--
KHS-1	India	1.5	0.4	rubber	rubber	30	150	3.5	Yellow - Green
GG6	Turkey	1.5	0.4	rubber	rubber	25	135	6	Green-Green
P-1	Japan	1.5	0.4	rubber	rubber	30	150	5	Salad - Yellow
PS-140	India	1.7	0.4	rubber	rubber	25	190	3.8	T. Green-Yellow.
PS-140T	India	1.7	0.5	rubber	rubber	30	225	5	T. Green-Yellow.
KHS-140T	India	1.7	0.4	rubber	rubber	30	200	6	Syn.-Ser.
GT14	Turkey	1.7	0.4	rubber	the cloth	50	315	14	Green-Black
KHS-140	India	1.7	0.4	rubber	rubber	40	150	3.5	T. Green-Yellow.
KHS-1/30	India	3	0.4	rubber	rubber	40	150	3.5	Salad - Yellow
KHS-1 / 30T	India	3	0.4	rubber	rubber	50	180	4	Syn.-Syn.
GG10 / 3	Turkey	3	0.4	rubber	rubber	30	225	10	Green-Green
PT-30	India	3	0.4	rubber	rubber	30	190	3.8	Salad - Yellow
KHS-1/40	India	4	0.4	rubber	rubber	50	150	3.5	Salad - Yellow
KHS-1/40 T	--	4	0.4	rubber	rubber	60	180	5	Syn.-Syn.
GG10 / 4	Turkey	4	0.4	rubber	rubber	30	225	10	Green-Green
PT-40	India	4	0.4	rubber	rubber	50	180	5	Salad - Yellow
KHS-1/60 T	India	6	0.4	rubber	rubber	80	180	4	Syn.-Syn.
F35 / 28	Italy	2.8	0.4	the cloth	leather	35	200	3.5	Zel.-Ser.
KHC-A6 (LT6)	India	2.5	0.4	the cloth	leather	35	190	3.8	Red-Ser.
KHC-A6T	India	2.5	0.5	the cloth	leather	35	225	5	Red-Ser.
KH-A6T	India	3.5	0.5	leather	leather	40	225	5	Ser.-Ser.
KHS-140	India	2	0.5	rubber	rubber	30	150	3.8	Green-Yellow
KHS-1/20	India	2	0.6	rubber	rubber	40	160	4	Salad - Yellow
P-2	India	2	0.6	rubber	rubber	40	160	4	Salad - Yellow
P-3	India	3	0.6	rubber	rubber	60	150	4	Salad - Yellow
PT-40IG	India	4	0.6	rubber	rubber	60	150	4	Green-Yellow
KHS-2	India	2.2	0.8	rubber	rubber	60	300	7	Salad - Yellow
KHS-2T	India	2.3	0.8	rubber	rubber	60	320	7.5	Syn.-Ser.
GG14	Turkey	2	0.8	rubber	rubber	60	320	7.5	Green-Green
KHS-2XT	Japan	2.3	0.8	rubber	rubber	60	320	7.5	Black-Black
RNR-100 / 23T	India	2.3	0.8	rubber	rubber	60	315	7.5	Black-Black
PS-2	India	2.3	0.8	rubber	rubber	60	300	7	T. Green-Yellow.
KHS-2/30	India	3	0.8	rubber	rubber	60	300	7	Salad - Yellow
PS-3	Japan	3	0.8	rubber	rubber	60	300	7	T. Green-Yellow.
KHS- 2/40	India	4	0.8	rubber	rubber	60	300	7	Salad - Yellow
PS-4	Japan	4	0.8	rubber	rubber	60	300	7	Green-Yellow
KHS-2/60	India	6	0.8	rubber	rubber	60	300	7	Salad - Yellow
PS-6	Japan	6	0.8	rubber	rubber	60	300	7	--
KHC-2A6 (LT14)	India	3.1	0.8	the cloth	leather	--	--	--	--
KHC-A10	India	3.2	0.8	the cloth	leather	--	--	--	--
KH-A10	India	4.6	0.8	leather	leather	--	--	--	Ser.-Ser.
LNL- 100 (LL14)	Japan	4.8	0.8	leather	leather	--	--	--	Ser.-Ser.
KHS-3	India	3	1	rubber	rubber	100	400	10	Salad - Yellow
POE-250T	Japan	2.6	1	rubber	rubber	100	430	11	T. Green-Yellow.
KHS-250T	India	2.6	1	rubber	rubber	90	430	11	Syn.-Ser.
PS-250T	Japan	2.6	1	rubber	rubber	--	--	--	T. Green-Yellow.
PS-251	--	--	1	rubber	rubber	100	400	10	--
PS-251T	Japan	--	1	rubber	rubber	100	430	11	--
KHS-251T	Japan	3	1	rubber	rubber	100	430	11	--
KHS-3/40	India	4	1	rubber	rubber	100	400	10	--
KH-2A6 (LL14)	India	5	1	leather	leather	--	--	--	Syn.-Ser.
KH-A10T	India	5.2	1	leather	leather	--	--	--	Syn.-Ser.
LT20	--	3	1	leather	the cloth	--	--	--	--
LL20	Slovenia	4.8	1	leather	leather	--	--	--	Syn.-Ser.
P-5	Japan	5	1.2	rubber	rubber	120	400	10	Salad - Yellow
KHS-3/50	India	5	1.2	rubber	rubber	120	400	10	Salad - Yellow
KHS-391	India	4	1.5	rubber	rubber	150	600	15	Salad - Yellow
KHS-390T	Japan	3.3	1.5	rubber	rubber	150	650	17	Syn.-Ser.
GG33	--	--	1.5	rubber	rubber	150	650	17	--
PS-391	Japan	4	1.5	rubber	rubber	150	650	17	T. Green-Yellow.
PS-391T	Japan	4	1.5	rubber	rubber	--	--	--	--
KHC 2A10	--	--	1.5	--	--	--	--	--	--
KH-2A10 (LL20)	India	4.8	1.5	leather	leather	--	--	--	Syn.-Ser.
KHC-3A10	--	5.2	2.4	the cloth	leather	--	--	--	--
KH-3A10	--	7.5	2.4	leather	leather	--	--	--	Syn.-Ser.
KHC-4A10T	India	6.2	3	the cloth	leather	--	--	--	--
KHS-A2T	India	3	0.5	rubber	rubber (pr / k)	70	320	8	Green-Black
KHS-A3T	India	3.5	1	rubber	rubber (pr / k)	120	430	11	Green-Black
KHS-A4T	India	5	1.5	--	rubber (pr / k)	250	750	21	Green-Black
KHS-A5T	India	5.2	3	--	rubber (pr / k)	--	--	--	Green-Black
BELT TYPE	Manufacturer	General thickness, mm	Thickness polyamide, mm	Upper layer	bottom layer	Min. Ø Pulley, mm	Limiting strength to break N / mm width	An effort tension at 1% relate lengthening	Color

Esband Seamless Flat Drive Belts

Seamless Belts Esband SeriesNE: Neoprene (chloroprene rubber) working cover High Quality) have proven themselves in the drives of equipment in the woodworking industry. In particular, the NE series seamless belts on spindle drives of 4-sided molding planers of the company Weinig as original (" native") Accessories from model lines series Unimat - Powermat - Hydromat, both old issues (sometimes 20-30 years old) and new ones, regardless of the number of spindles (this includes all WACO modifications).

It is also very useful for end users to know that the types of belts NE22, NE26 fit the vast majority of 4-sided planers on Russian market, regardless brand, country of origin, number of spindles, and other possible modifications (both Western and Asian TM Winner, Beaver, Nortec, and many others).

The basic range of warehouse types is given in the table below, and, starting from the power on the spindle of 17-22 kW, we recommend installing only the NE18 type, as the most reliable and having the minimum elongation in operation:

Everything Seamless Esband Belts antistatic, resistant to industrial oils, greases, gasoline, have a constant coefficient of friction, high wear resistance, low noise in operation. Our extensive stock of this series includes over 100 lengths, in 10mm increments, taking into account a nominal length tolerance of +/- 0.5%.

The belt types from this series NE21 and NE22 are ideal for scoring saw drives for machines of different functionality, sharpening machines, grinding machines for various purposes in metalworking. As a rule, in such gears, the width of the belts does not exceed 30 mm (often less), with an unfolded length of not more than 1000 mm. (usually from 400 to 700 mm).

Since belts of this series have lateral flexibility, for self-centering of the belt when working at high speeds, it is optimal to bombard at least one drive pulley in the transmission (if the pulleys are not equipped with flanged limiters). For some types of transmission (including transportation), grinding one or both sides of the belt is important as an option.

For optimal selection of flat seamless belts in a specific power transmission, the following parameters must be provided:

Engine power, (kW)
... diameters of driving and driven pulleys (mm)
... center distance of pulleys (mm) - when the number of pulleys is more than 2.
... drive pulley peripheral speed (rpm)
... operating conditions (temperature, dustiness, oil, etc.)
... the presence of frequent switching on of the drive (including a sharp jump of torque to maximum) and / or sharp braking.
... to calculate complex gears, especially in cases where belts work on both sides, a kinematic diagram with reliable center distances and pulley wrap angles is required.

Machine belts are an important element in the operation of equipment. This technical detail is an indispensable part of the machine:

drilling;

woodworking

lathe;

milling;

format-cutting;

Holzer LLC manufactures and sells belts for various types of machine tools. Our products can be bought in cities such as Moscow, Lyubertsy, Podolsk, Novosibirsk. Russia is an industrial country. Therefore, our products are in great demand. The price for it is quite low, while the quality of the products meets all modern standards and norms. If you want your machines to work stably and trouble-free, you should definitely buy our belts. It doesn't matter what kind of equipment you have. We produce belts for drilling, woodworking (Master Universal 2000, etc.), turning, sharpening and other types of machine tools.

The belts we produce are of the highest quality level. Therefore, with our products, your machines will work like a clock.

Main product characteristics

The catalog presented here contains all drive belts for various types of machine tools. And there are many of them. You can buy drive belts from us for almost any type of machine tool. Our assortment is huge. We manufacture tapes in a wide variety of types.

Drive belts for machine tools are needed primarily to transfer torque from one shaft to another using pulleys. Such products are used in a huge number of very different mechanisms. Their working surface is on the side. Various types of these products are produced. Drive belts for machine tools are: wedge, flat, toothed, round, wedge-shaped, balancing.

For example, V-belts are used in agricultural machines, various industrial units, etc. They are also used in the device of modern urban transport. V-belts for machine tools are made of cordon fabric that is coated with layers of rubber. The base layer is located between the longitudinal portions of the fibers. The price of such products may vary, depending on the model and manufacturer.

Machine tool flat belts are used in almost every industry. They are necessary to ensure the rotation of the pulleys, increase the accuracy and synchronization of work. Flat belts for machine tools have excellent performance. Their tape tolerates vibrations well and runs almost silently. Flat products have proven their worth in many industries. Moreover, their price is acceptable. Therefore, buying flat belts for machine tools will not be very expensive. Especially in the company Holzer LLC.

Timing belts for machine tools combine the features of a belt and chain drive. The belt rotates very smoothly. Timing belts for machine tools generate rotation without skipping effect. Thus, their efficiency is higher than that of conventional products. Thanks to such belts, the load on the machine shaft will be significantly lower.

The round machine belt can be used for small machines with low power. Although the scope of its application is wide enough. The round machine belt can be used in a wide variety of gears. They are equipped with a wide variety of installations, devices and mechanisms. A round belt for a machine tool does not lose its performance at an air temperature from -60 C to + 80 C. Thus, it can be used in almost any temperature regime. Round products are of low cost. Their price depends on the manufacturer of the product. You can buy various types of such products from us.

V-shaped machine belt belts have their own field of application - variator systems. They work great. These products have proven to be reliable and effective. CVT gearboxes cannot function without them. They are an integral part of the entire mechanism. CVT gearboxes are one of the most reliable and efficient.

In lathes, machine belt belts are widely used. Their use is primarily due to their quality. A tape made from high quality materials will last long enough.

Our advantages

Sale of belts for machine tools is the main activity of Holzer LLC. The price list contains various types of products (flat, round, etc.). Our online store offers a wide variety of belts for machine tools and other equipment. You can order and buy almost any belts from us.

We manufacture belts for both large industrial equipment and small lathes. The price of the products is quite low. Since we are a manufacturer of our own products, their cost is significantly lower than that of most of our competitors. Therefore, it will not be an invoice to buy our products.

If you need professional advice, you can always contact our staff. They will answer all your questions. They will tell you in detail about our products and help you make the right choice. Thanks to this, you can purchase exactly what you really need. You don't have to overpay and buy a useless thing. The quality of the equipment is high. The products comply with all international norms and standards. Its operation is reliable and durable.

In order to place an order, you just need to contact our employees. They will issue it as soon as possible. You will be able to receive your purchase quickly and without delay. We have been on the market for a long time. During our existence, we have established ourselves as a reliable and inexpensive supplier. Many of our customers are already convinced of this and use our products, which are distinguished by the highest characteristics. Therefore, working with us is profitable, convenient and comfortable!

www.rk-rti.ru

Flat drive belts

Optibelt flat belts

for machines and apparatus.

Assortment of flat belts

Installation and maintenance of flat belts

Flat endless belts

Production of flat belts for machine tools and equipment meets the highest requirements. High-quality belts increase the reliability and productivity of equipment, do not require special maintenance.

Application: textile industry, industrial machines, sawmills and chipboard machines, centrifugal and pneumatic pumps, roller mills, stone processing lines, generators and fans, drum milk dryers, openers and kneaders

Flat endless cord-cord belts (type I, II, III):

Main differences and advantages: Flat drive belts allow smoothing jerks (surges in torque) during heavy start-up at high speeds, due to initial slippage and gradual engagement with the drive pulley. Flat drive belts absorb engine oils and greases to a large extent, thus ensuring power transmission without loss of coefficient of friction over a long period of time. Flat drive belts are easy to operate and have a long service life. Flat endless cord-cord belt with double-sided fabric covering (type II) Flat endless cord-cord belt with one-sided fabric covering (type I)

Flat endless cord-cord belt without fabric covering (type III)

Flat belt parameters, mm Length (L) 1000 ÷ 5600 Width (W) 25 ÷ 200 Thickness (t) 2.2 ÷ 6.0

Flat belts based on polyamide fabrics

Flat belts with a polyamide core replaced the classic flat rubber-fabric belts. The pulling layer of flat belts is polyamide with its high tensile strength and withstand high loads, practically without residual elongation. Various elastomers and leather are used for the working sides of the flat belts. Flat-belt transmissions using flat belts with a polyamide core are distinguished by quiet running, precision of synchronous rotation and high efficiency.

Flat belts with a sealed core are resistant to oils, fats and other solvents, have high wear resistance and significant tensile strength. fabrics

Application of flat belts with semiconductor core:

high power transmission in classic and multi-pulley transmissions; in packaging machines; in the paper and textile industry as tangential belts; for cutting tools and machine tools; for loading devices.

Flat drive belts (based on a traction polyamide core) for power transmission from the world's leading manufacturers, offered to your attention, can be purchased both in cash and by bank transfer. These belts are designed to work in power drives of industrial equipment. Flat drive belts can be used for heavy duty and high tensile forces, such as main drives for roller mills, paper machines, stone cutting and stone crushing machines, sawmills, stamping presses in metal working, etc.

Main differences and advantages:

Flat drive belts help to smooth out jerks (torque surges) during heavy starting at high speeds, due to initial slippage and gradual engagement with the drive pulley. Flat drive belts absorb engine oils and greases to a large extent, thus ensuring power transmission without loss of coefficient of friction for a long time.

Flat drive belts are easy to operate and have a long service life.

BELT TYPE

Manufacturer

Total thickness,

Polyamide thickness,

Upper layer

bottom layer

Min. Ø Pulley,

lengthening

BELT TYPE

Manufacturer

Total thickness,

Polyamide thickness,

Upper layer

bottom layer

Min. Ø Pulley,

Ultimate tensile strength

Pulling force at 1% relative

lengthening

KHST-51	India	0.6	0	the cloth	the cloth	10	90	1.5	--
TP-5	Turkey	0.7	0	PA fabric	PA fabric	15	90	4	Yellow - Green
KHS-20FBG	India	2	0	rubber	the cloth	40	120	3	--
KHST- 80	India	0.9	0.25	the cloth	the cloth	20	100	2.3	--
PS- 55	India	0.9	0.25	HB fabric	rubber	20	100	2.3	--
KHST- 90	India	1.2	0.25	the cloth	the cloth	20	100	2.3	--
KHST-90G	India	1.2	0.25	the cloth	rubber	20	100	2.3	T.Zel.-Chern.
FNF- 3	India	0.9	0.25	the cloth	the cloth	20	100	2.3	T.Zel.
TT4	Turkey	1.2	0.25	the cloth	the cloth	15	90	4	Green-Green
FNF- 30	India	0.9	0.25	the cloth	the cloth	15	90	4	T.Zel.
KHS-F0	India	1	0.25	the cloth	rubber	20	80	2.3	Green-Green
TG4FSTR	Turkey	1.1	0.2	rubber	rubber	20	90	4	Green-Black
PF- 0	India	0.9	0.2	the cloth	rubber	20	80	3.0	Green-Green
FNF-6	India	1.1	0.4	the cloth	the cloth	30	150	3.5	--
TT6	Turkey	1	0.4	the cloth	the cloth	20	135	6	Green-Green
FNF-60	India	1	0.4	the cloth	the cloth	20	190	3.8	Green-Green
KHS-F1 / 1.2	India	1.2	0.4	the cloth	rubber	30	150	3.5	Green-Green
TG4	Turkey	1.2	0.4	rubber	the cloth	20	90	4	Green-Black
PF-1	Japan	1.3	0.4	the cloth	rubber	30	150	5	Green-Green
KHS-A1	India	1.4	0.4	the cloth	rubber	30	150	3.5	Green-Green
TG6	Turkey	1.2	0.4	rubber	the cloth	20	135	6	Green-Black
KHS-F1 / 1.7	India	1.7	0.4	the cloth	rubber	30	150	3.5	Green-Green
RNF-60 / 1.7	Japan	1.7	0.4	the cloth	rubber	30	150	5	T. Green-Zel.
KHS-F1 / 20	India	1.2	0.4	the cloth	rubber	30	150	3.5	--
KHS-1	India	1.5	0.4	rubber	rubber	30	150	3.5	Yellow - Green
GG6	Turkey	1.5	0.4	rubber	rubber	25	135	6	Green-Green
P-1	Japan	1.5	0.4	rubber	rubber	30	150	5	Salad - Yellow
PS-140	India	1.7	0.4	rubber	rubber	25	190	3.8	T. Green-Yellow.
PS-140T	India	1.7	0.5	rubber	rubber	30	225	5	T. Green-Yellow.
KHS-140T	India	1.7	0.4	rubber	rubber	30	200	6	Syn.-Ser.
GT14	Turkey	1.7	0.4	rubber	the cloth	50	315	14	Green-Black
KHS-140	India	1.7	0.4	rubber	rubber	40	150	3.5	T. Green-Yellow.
KHS-1/30	India	3	0.4	rubber	rubber	40	150	3.5	Salad - Yellow
KHS-1 / 30T	India	3	0.4	rubber	rubber	50	180	4	Syn.-Syn.
GG10 / 3	Turkey	3	0.4	rubber	rubber	30	225	10	Green-Green
PT-30	India	3	0.4	rubber	rubber	30	190	3.8	Salad - Yellow
KHS-1/40	India	4	0.4	rubber	rubber	50	150	3.5	Salad - Yellow
KHS-1/40 T	--	4	0.4	rubber	rubber	60	180	5	Syn.-Syn.
GG10 / 4	Turkey	4	0.4	rubber	rubber	30	225	10	Green-Green
PT-40	India	4	0.4	rubber	rubber	50	180	5	Salad - Yellow
KHS-1/60 T	India	6	0.4	rubber	rubber	80	180	4	Syn.-Syn.
F35 / 28	Italy	2.8	0.4	the cloth	leather	35	200	3.5	Zel.-Ser.
KHC-A6 (LT6)	India	2.5	0.4	the cloth	leather	35	190	3.8	Red-Ser.
KHC-A6T	India	2.5	0.5	the cloth	leather	35	225	5	Red-Ser.
KH-A6T	India	3.5	0.5	leather	leather	40	225	5	Ser.-Ser.
KHS-140	India	2	0.5	rubber	rubber	30	150	3.8	Green-Yellow
KHS-1/20	India	2	0.6	rubber	rubber	40	160	4	Salad - Yellow
P-2	India	2	0.6	rubber	rubber	40	160	4	Salad - Yellow
P-3	India	3	0.6	rubber	rubber	60	150	4	Salad - Yellow
PT-40IG	India	4	0.6	rubber	rubber	60	150	4	Green-Yellow
KHS-2	India	2.2	0.8	rubber	rubber	60	300	7	Salad - Yellow
KHS-2T	India	2.3	0.8	rubber	rubber	60	320	7.5	Syn.-Ser.
GG14	Turkey	2	0.8	rubber	rubber	60	320	7.5	Green-Green
KHS-2XT	Japan	2.3	0.8	rubber	rubber	60	320	7.5	Black-Black
RNR-100 / 23T	India	2.3	0.8	rubber	rubber	60	315	7.5	Black-Black
PS-2	India	2.3	0.8	rubber	rubber	60	300	7	T. Green-Yellow.
KHS-2/30	India	3	0.8	rubber	rubber	60	300	7	Salad - Yellow
PS-3	Japan	3	0.8	rubber	rubber	60	300	7	T. Green-Yellow.
KHS- 2/40	India	4	0.8	rubber	rubber	60	300	7	Salad - Yellow
PS-4	Japan	4	0.8	rubber	rubber	60	300	7	Green-Yellow
KHS-2/60	India	6	0.8	rubber	rubber	60	300	7	Salad - Yellow
PS-6	Japan	6	0.8	rubber	rubber	60	300	7	--
KHC-2A6 (LT14)	India	3.1	0.8	the cloth	leather	--	--	--	--
KHC-A10	India	3.2	0.8	the cloth	leather	--	--	--	--
KH-A10	India	4.6	0.8	leather	leather	--	--	--	Ser.-Ser.
LNL- 100 (LL14)	Japan	4.8	0.8	leather	leather	--	--	--	Ser.-Ser.
KHS-3	India	3	1	rubber	rubber	100	400	10	Salad - Yellow
POE-250T	Japan	2.6	1	rubber	rubber	100	430	11	T. Green-Yellow.
KHS-250T	India	2.6	1	rubber	rubber	90	430	11	Syn.-Ser.
PS-250T	Japan	2.6	1	rubber	rubber	--	--	--	T. Green-Yellow.
PS-251	--	--	1	rubber	rubber	100	400	10	--
PS-251T	Japan	--	1	rubber	rubber	100	430	11	--
KHS-251T	Japan	3	1	rubber	rubber	100	430	11	--
KHS-3/40	India	4	1	rubber	rubber	100	400	10	--
KH-2A6 (LL14)	India	5	1	leather	leather	--	--	--	Syn.-Ser.
KH-A10T	India	5.2	1	leather	leather	--	--	--	Syn.-Ser.
LT20	--	3	1	leather	the cloth	--	--	--	--
LL20	Slovenia	4.8	1	leather	leather	--	--	--	Syn.-Ser.
P-5	Japan	5	1.2	rubber	rubber	120	400	10	Salad - Yellow
KHS-3/50	India	5	1.2	rubber	rubber	120	400	10	Salad - Yellow
KHS-391	India	4	1.5	rubber	rubber	150	600	15	Salad - Yellow
KHS-390T	Japan	3.3	1.5	rubber	rubber	150	650	17	Syn.-Ser.
GG33	--	--	1.5	rubber	rubber	150	650	17	--
PS-391	Japan	4	1.5	rubber	rubber	150	650	17	T. Green-Yellow.
PS-391T	Japan	4	1.5	rubber	rubber	--	--	--	--
KHC 2A10	--	--	1.5	--	--	--	--	--	--
KH-2A10 (LL20)	India	4.8	1.5	leather	leather	--	--	--	Syn.-Ser.
KHC-3A10	--	5.2	2.4	the cloth	leather	--	--	--	--
KH-3A10	--	7.5	2.4	leather	leather	--	--	--	Syn.-Ser.
KHC-4A10T	India	6.2	3	the cloth	leather	--	--	--	--
KHS-A2T	India	3	0.5	rubber	rubber (pr / k)	70	320	8	Green-Black
KHS-A3T	India	3.5	1	rubber	rubber (pr / k)	120	430	11	Green-Black
KHS-A4T	India	5	1.5	--	rubber (pr / k)	250	750	21	Green-Black
KHS-A5T	India	5.2	3	--	rubber (pr / k)	--	--	--	Green-Black

Esband Seamless Flat Drive Belts

Esband NE series seamless belts: Neoprene (high quality chloroprene rubber) working cover has proven itself in the drives of woodworking equipment. In particular, seamless belts of the NE series on the spindle drives of 4-sided molding planers from Weinig, as original ("native") components from the model series of the Unimat - Powermat - Hydromat series, as old issues (sometimes 20-30 years ago) and new, regardless of the number of spindles (this includes all WACO modifications).

It is also very useful for end users to know that the types of NE22, NE26 belts are suitable for the vast majority of 4-sided planing machines on the Russian market, regardless of the brand, country of origin, number of spindles, and other possible modifications (both Western and Asian TM Winner, Beaver, Nortec, and many others).

The basic range of warehouse types is given in the table below, and, starting from the power on the spindle of 17-22 kW, we recommend installing only the NE18 type, as the most reliable and having the minimum elongation in operation:

All Esband seamless belts are antistatic, resistant to industrial oils, greases, gasoline, have a constant coefficient of friction, high wear resistance, and low noise in operation. Our extensive stock of this series includes over 100 lengths, in 10mm increments, taking into account a nominal length tolerance of +/- 0.5%.

The types of belts from this series NE21 and NE22 are ideal for driving scoring saws of machines of various functions, sharpening machines, grinding machines for various purposes in metalworking. As a rule, in such gears, the width of the belts does not exceed 30 mm (often less), with an unfolded length of not more than 1000 mm. (usually from 400 to 700 mm).

Since belts of this series have lateral flexibility, for self-centering of the belt when working at high speeds, it is optimal to bombard at least one drive pulley in the transmission (if the pulleys are not equipped with flanged limiters). For some types of transmission (including transportation), grinding one or both sides of the belt is important as an option.

For optimal selection of flat seamless belts in a specific power transmission, the following parameters must be provided:

Engine power, (kW) diameters of driving and driven pulleys (mm) center distance of pulleys (mm) - when the number of pulleys is more than 2. peripheral speed of the drive pulley (rpm) operating conditions (temperature, dustiness, oil, etc.) the presence of frequent drive starts (including a sharp jump of torque to maximum) and / or sharp braking.

To calculate complex gears, especially in cases where belts work on both sides, a kinematic diagram with reliable center distances and pulley wrap angles is required.

ark22.ru

Company "Mashdetal"

Our company has been operating in the Russian market for over 15 years. We specialize in transmission belts, bearings and conveyor belts. The specialization is quite narrow, but in each section there is great amount nuances that seriously affect final product and in which you need to understand. Here, of course, professional knowledge and skills are required.

We carry only premium brands Optibelt, SKF, Habasit, FAG, INA, NSK, Timken, thereby offering our customers only the highest quality products. You can choose any of the brands, go to the corresponding page and get the necessary information. If something is unclear or something is not understood, we will help you.

The site presents:

• Optibelt: all types of industrial and automotive belts, metal products (pulleys and bushings)
• SKF: the broadest range of bearings, lubricants, seals and technical devices
• Habasit: all types of conveyor belts and flat drive belts

The list of our products is quite large: Optibelt belts, pulleys, technical accessories, bearings, conveyor belts, as well as flat belts of our own production.

Optibelt belts supplied by our organization are considered the highest quality parts on domestic market spare parts. The following types of Optibelt drive belts are described in detail on the website:

Optibelt drive belts

• Driving belts for agricultural machinery;
• Optibelt V-belts;
• V-ribbed;
• Variator;
• Optibelt timing belts;
• Reinforced toothed belts Optibelt;
• Optibelt banded belts;
• Snowmobile belts;
• Optibelt belts for pumping units;

Optibelt guarantees the reliability of its products. Belts and drive belts from the German manufacturer Optibelt are distinguished by their particular reliability of materials; abrasion resistance; wide range of withstand temperatures; long service life; ease of installation; smooth running maintained during transmission; a wide range of transmitted powers and speeds of rotation of the pulleys; good indicators of stretching, elasticity, no sagging.

The drive belt from "Optibelt" is a well-thought-out complex design, created using the latest materials with different properties, advanced technologies in their processing and the calculation of indicators that the belt reveals already during use. With this approach, many types of drive belts appear, each of which clearly corresponds to the task at hand: reinforced toothed belts - for transferring high power, flat drive belts - for high-speed transmissions, multi-ribbed belts - for drives with the possibility of belt slipping; gears for powerful and high-speed transmissions, etc.

Careful manufacture of only high quality raw materials makes Optibelt belts extremely wear-resistant, immune to mechanical ( high temperatures, friction, shock, compression, stretching) and chemical (oils, fuels, lubricants) factors. In a word, belts from the Optibelt company are the best parts in terms of price-quality-durability ratio. You will also receive detailed advice by calling us or contacting one of the branches in the cities: Moscow, Krasnoyarsk, Orenburg, Tyumen, Kemerovo, Yekaterinburg and St. Petersburg. Here you can choose the right drive belts and buy them at the best prices on the market.

Belts from "Mashdetal" are the main detail in production!

optbelt.ru

Belts are flat

Polyamide core flat drive belt is a product that does not occupy last place in the machine-building market, as it is a traction element for water lifters, generators, mixers, header conveyors, openers and dough mixers. A flat drive belt can have two layers of friction, in which case it is called double-sided, it can be looped, in which case it is called endless.

• operating temperature range -50 ° + 150 ° С.
• Belts do not stretch, have high efficiency and are capable of operating at high speeds and high powers.
• Belts with a polyamide core, coated with chrome-tanned leather, which are recommended for use in gears with strong peak overloads, are in high demand.

CHIORINO flat belts:

TYPE Material Thickness (mm) Elongation 1% (N / mm)

T60 / 30A Synthetic rubber 3.00 60.0

T25 / 20E Synthetic rubber 2.00 17.0

T25 / 25E Synthetic rubber 2.50 17.0

T40 / 25E Synthetic rubber 2.50 18.0

T40 / 30E Synthetic rubber 3.00 19.0

DG-E10 / 30 HS Synthetic rubber 3.00 15.0

DG-E10 / 40 HS Synthetic rubber 4.00 15.0

DG-E10 / 50 HS Synthetic rubber 5.00 15.0

DG-E10 / 60 HS Synthetic rubber 6.00 15.0

DU1 / 30W Polyurethane (TPU) 3.00 5.0

DU1 / 40W Polyurethane (TPU) 4.00 5.0

DU-E 10 / 30W Polyurethane (TPU) 3.00 15.0

DU-E 10 / 40W Polyurethane (TPU) 4.00 15.0

T0 HS Synthetic rubber 1.40 2.0

T1 HS Synthetic rubber 1.50 5.0

T1R HS Synthetic rubber 2.10 5.0

T2 HS Synthetic rubber 2.35 8.0

T2R HS Synthetic rubber 3.00 8.0

T3 HS Synthetic rubber 2.60 11.0

T3R HS Synthetic rubber 3.20 11.0

T4 HS Synthetic rubber 3.10 12.5

T4R HS Synthetic rubber 3.90 12.5

T6 HS Synthetic rubber 3.50 18.0

areas of application of flat polyamide belts

• presses for car bodies
• sawmills and machine tools for chipboard production
• 4-sided shaping machines
• circular saws, shaving and tenoning machines
• flat belts for machine tools: drilling, turning, grinding
• cable-twisting and deck-twisting machines
• double twisting machines
• ring spinning and automatic winding machines
• paper bobbin winders
• cards, roving frames, spinning machines
• pneumatic and high speed spinning machines
• printing and folder gluer
• nibbling presses
• machines for the production of cardboard cores
• mill roll mills and plucking lines
• drum milk dryers
• brush scrubber and brush washers
• baking powder and kneaders
• purifiers and blowers
• folding box machines
• cutter drives and can lines
• bag welding machines
• self-tapping and slitting machines
• extruders
• generators
• fans
• centrifugal and pneumatic pumps
• mixers
• roller mills
• turbines
• stone processing lines

In order to order a belt that suits you, we need to know the minimum diameter of the pulley or shaft on which the belt will work, the length and width of the belt, and the operating conditions. The dimensions of the belts can be limited only by the dimensions of the rolled material and range from 120 mm to 50,000 mm.

For prices for belts, availability of material in stock, timing of belts production, please contact our managers. The production time for belts is 1-3 weeks, and depends on the volume of the order, the availability of material in the warehouse, the workload of production.