Proterm outdoor temperature sensor. Boiler accessories Protherm

Trademark Protherm is a well-known manufacturer of innovative equipment for off-grid heating systems. At the beginning of the new millennium, a promising Czech brand came to the attention of the giant Vaillant, who acquired the company and brought it to a new level. technological development. The quality of Protherm can be considered a standard in boiler equipment, since the plant has an implemented system of personal responsibility and each product is manufactured from start to finish by one specialist. gas boilers Protherm have a wide range of models, presented in the Pantera, Cheetah, Leopard and Bear series. The advantages of Czech gas equipment are excellent performance and well-thought-out engineering design, which in the best way contribute to the maximum expansion of boiler functionality.

Heating equipment Protherm is equipped with modern automatic system control and management and biothermal heat exchangers capable of preparing hot water for domestic use. In addition, Protherm boilers can work as a source of hot water, in summer they have the ability to be combined with an indirect heating boiler and are able to operate on liquefied gas. To realize these useful qualities of Protherm, the company has launched the production of the necessary accessories for boiler equipment. The consumer is offered various NTC temperature sensors for boilers. This device is inserted into a special sleeve of the water heater and attached to the boiler board. Such a simple and reliable scheme allows you to automate the process of heating water for domestic needs by turning on the boiler when the water temperature in the boiler drops.

In situations where there is no access to the gas pipeline system, a convenient solution would be to use the conversion kit (changeover) of the boiler to liquefied gas, which allows the use of propane-butane cylinders or a galzoder. The kit includes a gas pressure reducing valve, a set of brass burners, gaskets, connecting parts. If necessary, burners and seals can be purchased separately. Protherm did not disregard the possibility of energy-efficient operation of the boiler in automatic mode. To do this, external temperature sensors are used, which, together with internal temperature devices, maintain the specified microclimate parameters, reducing gas consumption during outdoor heating. For arranging a domestic hot water supply system, special kits are offered for connecting the boiler to an indirect heating boiler. Compact electric pumps are used for efficient filling of the tank. Moreover, with the help of some kits, it is possible to form integrated hot water systems based on not only a gas, but also an electric boiler.

We offer to buy automation for the Protherm boiler in our online store in Moscow. Among a large assortment, presented in the catalog, is always available and other equipment for the home, cottage or cottage. By purchasing from us, you will receive the following benefits:

• an individual approach to each client at all stages of cooperation, from assistance in selecting the optimal model to delivery, installation and assistance with warranty service. If you did not find the necessary equipment among the proposed range, we will do our best to satisfy your request;
• delivery of the selected goods safe and sound is carried out within Moscow and the Moscow region within the time agreed with the client. It is also possible to send an order to any region of Russia through a transport company chosen by the client;
• cooperation with leading domestic and foreign manufacturers allows us to offer good prices for the entire range of such equipment as Automation for Protherm boilers;

Automation for Protherm boilers and other products presented in the catalog are provided with a manufacturer's warranty, the period of which varies depending on the brand and model.

http://www.site- a reliable partner you can trust.

DELIVERY | We also offer prompt delivery of your order in Moscow and anywhere in Russia.

We work with leading transport companies.

PAYMENT METHODS

• cash
• cashless payments
• bank cards: VISA, MASTERCARD, WORLD.

• 20049244 vendor code
• Protherm (Slovakia) Manufacturer

• 2 years Manufacturer's Warranty

Payment for goods.

1. Payment to the courier upon receipt of the order (only for delivery in Moscow and the Moscow region)

Payment for the order is made in cash to the courier upon receipt.

2. At the pickup point from 5000 rubles ( Moscow, Zagorodnoye shosse, 15, building 1 (metro Krymskaya) entrance to the Auto Parts Store )

Payment for the order is made in cash upon receipt.

3. At the pickup point (Moscow region, Domodedovo city district, Kolychevo village, 13B)

Cash
Payment for the order is made in cash upon receipt.

bank card
Payment by bank card.

The manager has the right to ask for a document proving the identity of the client. Payment systems VISA, MasterCard are supported.

4. Cashless payment

Bank card via Internet acquiring

To select this payment method, you must select the appropriate item when placing an order through the basket. Payment systems VISA, MasterCard are supported.

Bank transfer from 5000 rubles and +5%
Non-cash payment occurs after the order is approved and the account is issued by the manager.

Goods delivery.

The online store "Jakko" delivers goods by its own delivery service.

1. Geography and delivery cost.

The cost of delivery up to 2000 rubles in Moscow and the Domodedovo district of the Moscow region is 2000 rubles.

The cost of delivery from 2000 rubles in Moscow and the Domodedovo district of the Moscow region is 500 rubles.

The cost of delivery to other districts of the Moscow Region is based on the standard delivery of 500 rubles + 30 rubles per 1 km from the Moscow Ring Road according to Yandex.Maps (one-way distance is taken into account).

The possibility and cost of delivery to the neighboring Moscow region is negotiated separately.

Delivery to the regions by transport companies.

The cost of delivery to the transport company is 500 rubles.

Delivery takes place only after payment of the invoice.

Delivery is carried out through transport companies:

You can also choose any transport company that is convenient for you. TC services are paid separately!

With an order amount of less than 5000 rubles. We do not deliver to regions.

Please note that in our online store, cargo insurance when sending to the regions is a prerequisite.

Dear forum users.
I read the entire thread from cover to cover. I ask for advice and opinions. What do we have. Sip-panel house 142 m2 for permanent residence. The first floor has a warm water floor (connected through a manual three-way valve), the second floor has radiators (with thermal heads) and heated towel rails. All last year, it was heated by an old RUSNIT boiler, the power was set to 6 kW, it worked in on-off mode, clocked every 40-50 seconds, i.e. 40 seconds works 40 seconds does not work. As a result, the radiators were always hot, the temperature was comfortable, and the costs were slightly higher than acceptable. In the most frosts included on 12 kW. For a three days. The disadvantages of this boiler are obvious, the stepping is 6-12-18 kW. No smoothness, and with a dedicated power of 12 kW, there is already a little overkill. Plus, I constantly had to adjust the temperature of the coolant and sometimes three-way.
This summer, I installed Skat Proterm 9 kW (I left the old boiler in reserve) and entrusted the management of the boiler to ZONT H2. Installed all four sensors (supply, room, reserve, street). The main sensor is on the ground floor (where there is a warm floor). It is clear that the hysteresis is set to 0.1 degrees, but the boiler still turns on a couple of times a day. Definitely comfortable on the 1st floor. Temperature fluctuations are minimal, within 0.5 degrees, the stove is working. But on the second floor, the radiators cool down quickly, and despite the fact that the warm air should tend to rise, it becomes cool. But it's still zero outside.
I tried different options, and just according to the sensor and along the ZONT curve (PZA), I wanted the boiler to cycle more often and warm up the second floor, in spite of everything, as a result, I refused PZA for the time being, because the boiler still cycles in this mode, and then turned off for a long time and the result is the same.
Options.
1. Budget. I read that someone has the main sensor in a situation similar to mine on the second floor, of course it’s a little problematic for me, but apparently I’ll start with this. Plus, of course, it is now the most budget option. The downside is that, in general, I don’t really like the ZONT control algorithm, because it turns on the maximum power very quickly, almost like on-off. Maybe I'm wrong, but that's how it seemed to me. I would very much like to see the operation of the boiler with native sensors in the PZA mode.
2. Seductive. Follows from the wish in the first paragraph. Purchase native Proterm sensors, external and internal, put the internal one on the second floor. And ZONT can already be used in parallel, i.e. turn on / off the boiler and control the state. There are many questions for me here:
- Do these native panels, Proterm Exocontrol 7 for example, already have built-in temperature sensors or should they be bought and carried separately? Do they connect to the same connectors as ZONT? (I really don't want to lose ZONT), maybe there are some options?
- At what height from the floor is it better to install temperature sensors? I read about 1-1.5 meters, but I have not seen this anywhere in the literature.
- Is the boiler operation algorithm when using Exocontrol very different from the boiler operation algorithm from ZONT?
- What sensors would you recommend to buy in order not to overpay? If anyone has numbers, throw off, so as not to rummage too much.
3. If Exocontrol works on the same connectors as ZONT, ​​then it might be worth buying an external Proterm temperature sensor, picking up the PZA curve already on the boiler, and not on ZONT, ​​and adjust the rest already with ZONT ohm? Is this option possible or do you need two native Proterm sensors?

I look forward to some advice from those in the know...

PS: in the near future I want to switch to a double tariff, so I ask you to take everything written with an eye on this factor...