What animals can be molded from plasticine in stages. Step by step modeling for children

An activity such as modeling animals from plasticine develops not only fine motor skills, but also speech skills. think tanks, abstract thinking and imagination. Animal modeling is quite a diligent and step-by-step process, so it is necessary that you help and guide your children.

In today's lesson, we will sculpt a pet - a sheep and a crocodile.

How to make a turtle step by step

Materials for modeling sheep:

• board;
• stack;
• plasticine white, black, blue

How to craft:

We begin to sculpt a muzzle. From plasticine of black color we sculpt a small rectangle. We make the upper part concave. From above we outline a place for the eyes. We sculpt the body in the shape of a circle. We connect the muzzle and torso.

We sculpt horns on top of the head. To do this, we sculpt a small flattened rectangle from black plasticine. We attach it over the head. We sculpt four legs in the form of tubes. We attach two in front and two in the back.

Wool will be sculpted from white in the form of circles of different sizes. We sculpt four small circles and two larger ones. Glue three small circles on the body in a row. Below them are two large ones, below is another circle.

We sculpt four more circles: one large, three smaller ones. On the bottom row we attach one small circle, then one large one, and then two more others.

For white eyes, we sculpt two ovals, attach them to the intended part. From blue plasticine again we sculpt two smaller ovals. We attach them to the ovals of white.

We sculpt the pupils in the form of dots and attach them on top of the blue color. On the nose we make holes with a stack.

The sheep is ready!

Materials for modeling a crocodile:

• green plasticine;
• lightning;
• board;

How to craft:

First, let's make the body. To do this, we make a “sausage”-torso, then stretch it out and flatten it from above. In the neck area, we squeeze the plasticine from the sides, trim the nose.

We make paws. We cut out the fingers on the paws with a stack. We bend each paw.

The material for creativity and the embodiment of bold children's fantasies is plasticine. Sometimes, parents do not even know what their young sculpture is capable of, but one has only to teach and interest him, and there will be no limit to the surprise of adults. However, one should not assume that by giving the child plasticine in his hands and sitting him down by workplace, he will begin to create his masterpieces with joy and enthusiasm. Of course not - like everything else, the child must be taught. Actually, that's what we're going to do today. And let's start with simple figures of our smaller brothers.

So, to your attention are a few master classes on how to make animal figures from plasticine.

But, before we start sculpting animals, let's focus on the choice of plasticine. In this case, it is better to focus on the age and skills of the child: soft and pliable plasticine is suitable for the smallest, it is better for older kids to buy medium soft plasticine. By the way, note to parents, when the baby learns how to sculpt animals from plasticine step by step, you can interest him and offer to collect a whole zoo. To do this, he will need a special plasticine - made from which, harden after immersion in hot water.

And one more important preparatory moment. Of course, modeling animals from plasticine is an exciting activity for children, but before starting the process, you need to prepare a workplace and tools. So, you will definitely need: a board or thick oilcloth, stacks.

Now that everything is ready, we begin to sculpt animals from plasticine step by step.

Example 1

Little cute animals, domestic and wild, for sure, your crumbs have their own favorite. But which of the kids does not like an elephant:

“The elephant is big, but he is quiet.

The kindest is an elephant!

It is this good-natured huge inhabitant of warm countries that our first master class will be devoted to. Let's get started:

Example 2

Your home collection will not do without an eared friend, so dear parents, we sculpt animals from plasticine step by step further. Now we have a hare in turn.

Example 3

"Ducks swim in the pond-

Looking for good food."

Let's continue our fascinating lesson and make a funny duck together with the baby:

Example 4

The king of beasts is a powerful lion. Let's continue our creative process and make a fiery red lion cub - the hero of many children's fairy tales and cartoons.

As you can see, it’s enough just to sculpt animals from plasticine, then they can be used for crafts or role playing. Here are some more interesting options that your little one might be able to make himself.

Articles on this topic:

Paper is a simple affordable material from which you can make a variety of toys, for example, voluminous crafts made using different techniques. Children love paper airplanes or boats. But there are many other ideas. Today we will analyze how some of them bring to life.

Plasticine modeling is an incredibly fun and interesting activity for children. Kids like to sculpt everything that surrounds them: houses, flowers, their favorite toys ... However, most of all they like to sculpt animals. Why?

In the process of a long study of the behavior and psychological characteristics of children under 4 years old, it was revealed that children of this age identify themselves not with people, but with animals. Therefore, in the process of drawing or creating a domestic or forest animal with the help of plasticine, the child expresses his own essence.

Plasticine modeling of animals with a child

Working with plasticine in each educational institution is conducted not in vain - this material is necessary for kids not only for fun, but also for the development of fine motor skills, for the manifestation of the creative abilities of children.

Today, on the shelves of stores you can buy beautiful, soft, bright plasticine, in the form of dough, paste, balls. With such material, it becomes possible to make fairy-tale characters, favorite cartoon characters, etc.

By the age of three, the child is already completely ready for creativity using plasticine. On the part of an adult, it is enough just to suggest to the children what to blind, and also, if necessary, show how to do it. At the age of 3, a child not only can engage in lesson creativity, but must also do it, this is his inner necessity. Being engaged in modeling, he unconsciously develops memory, perseverance, concentration, etc.

In modern kindergartens in Lately gained quite a lot of popularity plasticineography.

What is needed for this? Sheer trifles - just plasticine, a piece of cardboard and a plastic board and a little imagination! Having all this, the child can start creating his own picture from plasticine.

You can sculpt animals or the world around the child in another way - for example, using applications. Amazing animals are also obtained using ball plasticine, which provides many additional features for the little artist. For example, with the help of ball plasticine, you can stick around an ordinary jar or glass, and then we will get a beautiful pencil box.

It is much more convenient to sculpt animals from plasticine if you use various additional materials. Autumn offers us a lot of options for crafts, when you can easily find acorns, beautiful bright autumn leaves, twigs, etc. on the street.

Plasticine modeling: getting started

In order to help a child learn how to sculpt animals correctly, it is necessary to teach him how to work with the material correctly.

You need to work on a special board made of plastic. It will not allow you to stain the surface of the table or furniture. Often, in a kit for young children, additional molds of various animal figures or geometric shapes are sold, which will introduce the child to the material and its capabilities. However, this is only suitable for the first lessons with plasticine, and not for an experienced baby.

kdcnov.ru

It is extremely important to teach the child the basics of working with plasticine - how to knead the material, how to roll it, the main figures that you can sculpt yourself (for example, a ball, sausage, bagel, etc.). As soon as you see that the child has learned to sculpt the most basic shapes, proceed to more complex designs. The main thing here is to work, work and work again. The more practice, the faster the child will develop their creative abilities and show them to others.

If the child does not yet have enough strength in his hands to knead the material, help him with this - knead the plasticine until it becomes soft and plastic enough. It will be much easier for a child to work with such a correctly prepared and warmed up plasticine in his hands. And at the end of the work, be sure to wash the child’s hands thoroughly, make sure that there is no dirt left under the nails.

Modeling animals from plasticine: a master class on making a horse

There are different variations of sculpting a horse (depending on the age of the child), but even a baby will be able to blind the simplest horse preschool age. You can invite your child to mold a horse from their favorite cartoon, a beautiful thoroughbred horse or a fabulous unicorn or pegasus.

Choose 2 main colors for sculpting the horse, prepare 2 small objects that will act as eyes, and 4 matches or wooden toothpicks.

First of all, we roll sausages from plasticine. To the bottom, each sausage should expand a little - this is how we create the future legs of our horse. To make the legs as firmly fixed on the body as possible, insert a toothpick into each leg.

The next step is sculpting the horse's body. To do this, we sculpt a thick short sausage, bend one of its edges up a little and narrow it a little - this will be the neck of the future horse. You can also insert a toothpick into it to then fix your head on it.

You can blind the head by making a small oval blank, at the end it needs to be slightly narrowed. With the thick end of the head, we attach it to the neck, sticking it on a toothpick or just sticking it to the body. In the same way we connect the legs to the body of the horse.

It's time to make 2 more small balls from plasticine, and then flatten them - these will be horse nostrils. Let's make 2 more small balls and get the horse's eyes, into which you will need to insert 2 small objects (beads, buttons, etc.).

To mold horse ears, you need to invite the child to make 2 balls, and then make droplets from the balls - slightly stretch the ball from one end. Another two flattened balls make excellent hooves.

It remains quite a bit - roll out a piece of plasticine into a tape and attach the mane in place, and also make the tail in exactly the same way as the mane.

Modeling animals from plasticine: a master class on making a cat

You can also blind a cat in several ways. Here is the easiest way.

For this modeling method, you will need to use a special knife for cutting clay, clay itself and a few wooden toothpicks. This method is perfect for sculpting the little ones.

Take a piece of plasticine and divide it into 3 even parts with a knife. From one part it is necessary to roll a ball - this will be the body. From the second piece we separate a small piece, from which we will continue to make a tail, and from the bulk of the second piece we sculpt a head. We divide the third part of the plasticine into 6 equal parts and roll balls out of them.

From 4 small balls we roll the flagella - these will be paws, we divide the fifth ball into 2 parts and sculpt 2 ears, we also divide the sixth into 2 identical pieces (for the cheeks) and separate a very small piece (for the nose).

It remains the case for small things - to connect all the parts with the head. Ear balls can be shaped like a circle or triangular with a little flattening. We insert a toothpick into the head, on which the entire body of the cat will be attached.

In the same way (with the help of toothpicks) we attach flagella-legs to the body. You can additionally mold a small red flagellum from red plasticine, which will become a cat's tongue.

Any animal is molded from the most basic figures that just need to be correctly assembled - balls, flagella, ribbons, sausages.

Help the child to show his imagination and just be there - this will be enough for him to be able to sculpt animals or people from plasticine, the phenomena and things around him in life.

Wild animals. Based on the Russian folk tale"The Fox and the Wolf"

Modeling from plasticine. Senior group.
Target: Learn to sculpt an animal from one piece of plasticine in a new way.
Tasks:
Tutorial: To form the ability to sculpt animals, to highlight the main parts of the depicted object.
Developing: Develop the ability to divide plasticine into the required number of parts, determine their size and shape, work according to the scheme.
Nurturing: Raise interest in working with plasticine, evoke positive emotions from the work process and its result.
Preliminary work: Reading the Russian folk tale "The Fox and the Wolf". Dramatization of a fairy tale. Looking at pictures of wild animals. Mixing plasticine to get a gray tint.
Methods and techniques: Conversation with children, looking at pictures, working with a diagram, didactic game, Practical activities children.
Materials and equipment: A wall-mounted magnetic board, geometric figures and voluminous bodies, a fox and a wolf molded from plasticine as a model.
Demo material: Pictures depicting a fox and a wolf, an illustration for the fairy tale "The Fox and the Wolf", graphic diagrams for children (a diagram of dividing a piece of plasticine into parts, a diagram of modeling from each part of individual parts), a didactic game "Where is whose tail?".
Handout: Plasticine boards by the number of children, stacks by the number of children, a set of plasticine by the number of children, hand wipes by the number of children.
Lesson structure
1. Introduction.
2. The main part.
3. Final part. 1. Introduction.
- Children, guess the riddles ... He looks like a shepherd dog, every tooth is a sharp knife, he runs, baring his mouth, ready to attack a sheep. (children's answers). That's right, wolf. The second riddle... They say she's cunning, she takes chickens out of the yard. But on the other hand, she is beautiful - all the guys like it. (children's answers). Yes, it's a fox. (I attach a picture of a fox and a wolf to the board).
- Children, now we will learn to sculpt a fox and a wolf in a new way.
- You have plasticine sets on your tables. Whoever has an orange color in the set will be
sculpt a fox. Who has gray - a wolf. Raise your hands, who's orange? .... (I list the children) You are sculpting a fox. Raise your hands, who's gray? ... (I list the children) you are sculpting a wolf.

2. The main part.
Look carefully at the animals that I blinded ... (I demonstrate).
Tell me, how many parts do you see in a fox? (children's answers) That's right, three. Name these parts. (children's answers - head, torso, tail).
How many parts do you see in a wolf? (children's answers) Three. Name them. (children's answers - head, torso, tail).
What do you see in common between a fox and a wolf? (children's answers - both have a head, torso and tail). How are animals different? (Children's answers - the fox's tail is long and fluffy, while the wolf's tail is shorter and not so fluffy).
Okay. How many basic parts does a wolf have? (three) At the fox? (three)
So how many parts will we divide the block of plasticine into? (into three parts).

The largest part is the body, then the head and tail.

See what we need to mold to make the body? (children's answers). That's right, we will roll out a thin cylinder and flatten it.
How do we get the head? (children's answers). That's right, we will roll the ball and stretch one side.
How do we blind the tail? (children's answers). That's right, a small flagellum.
Let's get some rest before work.

Fizkultminutka.
Like our animals (clap hands.)
Paws are merrily knocking:
Top-top-top, top-top-top. (Stomping feet.)
And tired legs
Clap your hands:
Clap-clap-clap, clap-clap-clap. (Clap hands.)
And then sit down (Squats.)
Animals dance side by side. (Jumping in place.)
And how they start running - (Running in place.)
Nobody can catch up with them.
Let's get to work.(Children work, the teacher shows with parallel commenting). We divide the plasticine according to the scheme ... First, in half. We divide one part in half again. (After each action, the teacher looks at the progress of the children and the quality of their work).
We take most of it, knead it well. Rolled up a cylinder (sausage).
They put it on the board and pressed it, flattened it. With a stack we make cuts on the right and left on the workpiece. The cuts must be the same. In the places of the cut, we smoothed it with our fingertips and round the whole part to get the shape of a rainbow.
We take part 2. Roll up the ball. Fingers stretch one side, sharpen. This will be the head. At the crown we draw out two ears., They look like triangles.
We take detail 3. What will it be? (children's answers are the tail). Right. Let's play the game "Where is whose tail?" (The teacher on the magnetic board has images of animals without tails: a hare, a wolf, a fox, a squirrel. Children explain in words where whose tail is. For example, the first on the left is the tail of a squirrel, etc. Children repeat which tail the fox has, which one wolf.) They rolled up a flagellum. We sharpen at the ends.
We attach the details. What will we do so that the parts do not fall later? (Children's answers - smooth out the joints with your fingers).
We make eyes, but they should not be large. And the nose. We decorate the tail and paws of the fox.
Show what you got?

3. Final part.
Guys, what did we do today? (children's answers - they sculpted a wolf and a fox)
– Did you learn something new? (children's answers - sculpt the torso and paws from one part)
- You did a good job today. Put your forest dwellers on plates. We clean up the workplace.

Go ahead - make funny animals from plasticine and create real ones!

plasticine giraffe

A long neck, a good-natured look and a cheerful orange-yellow color - of course, this is a giraffe! Let's make this shy handsome man out of plasticine. A small giraffe will become a bright decoration of your home collection of plasticine animals.

You will need: plasticine in yellow, orange, black and white, as well as a toothpick.

1. From yellow plasticine, mold an oval body and four cones (giraffe legs).

2. Now make a long tourniquet (neck) and pierce it along with a toothpick so that its edges are visible. If it didn’t work out exactly, don’t worry - you can always correct the product, it’s plasticine.

3. The head and ears will also be made of yellow plasticine.

4. Gently connect all the details, smoothing the attachment points of the neck to the torso and head.

5. From tiny white and black circles of plasticine, blind the baby's eyes. Make the nostrils with a toothpick.

6. It's time to make the giraffe a thin tail with a brush.

7. Make horns from orange plasticine.

8. And finally - attach small circles-specks to the giraffe's body. Our sunny plasticine giraffe baby is ready!

Now watch a funny cartoon online that will tell you how to mold a giraffe from plasticine.

We sculpt a parrot from plasticine

The ancient Indians liked to say: "Every noble person should teach at least one parrot to speak." Fortunately, you and I will not have to torment this bright exotic bird. To ennoble your room with a colorful figurine, it will be enough just to mold a parrot from plasticine.

You will need: plasticine blue, red, yellow, black and white.

1. Make an oval from yellow plasticine. This is the body of a parrot.

2. Stick a small red circle to the body. This is the head.

3. Now mold two blue droplets from plasticine. These are wings.

4. Attach them to the torso.

5. Make a breast from white plasticine.

6. From yellow - a beak.

7. And now make eyes out of tiny white and black circles, and a bright crest out of yellow cones.

8. Attach a tail to the parrot at the back, and make notches on the wings and breast with a stack that imitate plumage.

9. From a thin yellow flagellum, make paws for a parrot, attach to the body.

Handsome! It seems as if he had just returned from the Brazilian carnival - his plumage is so colorful and colorful!

And if you want to mold a proud parrot with a multi-colored tail, here's a video for you:

How to mold a turtle from plasticine

Such a funny plasticine turtle will make anyone smile. Looking at this funny little thing, you involuntarily get the feeling that someone carefully covered it with M&M's balls. Your plasticine animals will only be happy with such a company.

You will need: plasticine in yellow, green, black and white, as well as small plasticine balls of bright colors.

1. Blind an oval from yellow plasticine and glue it with bright multi-colored plasticine balls. You will get a cheerful shell.

2. From green plasticine, make flat paws and a small tail. Attach to the turtle.

3. Then form the head and also connect to the shell.

4. From white and black plasticine, make eyes for the turtle.

5. It remains only to draw a wide smile for the turtle.

Charming!

I know, I know what you're waiting for! Of course - video "How to mold a turtle from plasticine." Get it!

Well, do you like this plasticine modeling of animals? Let's go further!

Modeling plasticine insects

Who doesn't love ladybugs? Everyone loves them, especially since they are so reminiscent of summer. Let's imagine that we found ourselves in a flowering meadow, and blind this bright bug.

You will need: plasticine of red, black, green, yellow and white colors; thin wire; toothpick; black beads; stack.

1. From green plasticine, mold a leaf and use a stack to make veins on it.

2. Blind an oval from red plasticine and flatten it at the ladybug's head. From black plasticine, roll one large ball (this is the head) and seven small ones (specks). And from white plasticine, make three small balls.

3. Connect the body parts of the ladybug. Attach the head to the body, stick black balls and one white ball on top of the red oval (this is a highlight). Make a slit in the wings with a toothpick. Make eyes out of white circles and beads.

4. Make antennae and paws from pieces of wire.

5. And finally, sit the ladybug on a leaf with a camomile from white and yellow plasticine.

And now let's make the ladybug her biting friend - a plasticine wasp.

Do-it-yourself plasticine goldfish

Have you thought about making an aquarium out of plasticine? It’s easy to make starfish and octopuses, but how to make a fish out of plasticine? Now I'll tell you.

You will need: plasticine red, yellow and white; beads (for the eyes), a plasticine knife. However, choose the color of plasticine at your discretion.

1. To begin with, mold an oval body to the fish, as well as fins and a tail.

2. Connect the body with the tail and fins, make notches.

3. Stick a few yellow stripes on the back of the fish. Applying a plasticine knife to the body of the fish, as shown in the photo, make scales for it.

4. Great! With the help of a stack, make a mouth for the fish and attach 2 beads to the place of the eyes.

Hooray! gold fish ready to make wishes come true. Give it to your best friend and let it become his talisman.

And here's what it might look like plasticine mascot fish.

How to mold a cute plasticine fish simply and quickly, the following cartoon will tell you:

Congratulations! Now you know how to sculpt animals from plasticine. I hope you liked it.

And now you have a great opportunity to blind plasticine transport and go on a real plasticine journey.